1964 Pontiac Tempest Transmission Parts
Find Your Specific 1964 Pontiac Tempest Transmission Parts
Below you will find various in-demand Pontiac Transmission Parts, components and accessories for your 1964 Tempest. Advance Auto Parts has popular Tempest parts like Transmission Seals, Transmission Mounts, Transmission Bearings and more. You’ll also find aftermarket and OEM Transmission Parts for other Tempest model years including
1961,
1962,
1963,
1965,
1966,
1967,
1968,
1969,
1970 and more. Select a category of 1964 Pontiac Tempest Transmission Parts below and start saving instantly.
Popular 1964 Pontiac Tempest Transmission Parts Categories
Essential Transmission Parts for 1964 Pontiac Tempests
Schaeffler – Cone (Part No.KM86649)
from
$24.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2268)
from
$9.29
Anchor 2268 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1958-1984
- Weight approx: 2 Lbs
- Rubber Crown With Air Gap
- Height Without Studs: 1.9 Inch: 48.25 Mm
- Studs And Bolt Holes Inline
- Stud Centerline: 1.5 Inch: 38.1 Mm
Felpro – Manual Transmission Gasket Set (Part No.TS 30118)
from
$24.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Driveworks – Taper Bearing Set (Part No.S-A-36)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Manual Transmission Gasket Set (Part No.TS 5190)
from
$11.49
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
ATP – AT OIL PUMP ORING (Part No.SO-21)
from
$9.59
AT OIL PUMP ORING
Motive Gear – Differential Pinion Seal (Part No.2043)
from
$3.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
B & M – Bracket and Lever Kit (Part No.70497)
from
$111.99
Bracket and Lever Kit APPLICATION: For GM 1962 to 1973 Powerglide without T.V. Hole.
Product Features:
See More
Product Features:
- Incl. Cable Bracket/Shift Lever/Spacers
- Incl. Swivel/Cotter Pin/Nut/Bolt/Selector Shaft
National – Multi-Purpose Seal (Part No.6712NA)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Manual Transmission Output Shaft Seal (Part No.471341N)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
Product Features:
See More
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Bearing Race (Part No.M88010)
from
$8.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Help – Clutch Pilot Bushing (Part No.14650)
from
$11.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – AT OIL PAN GASKET (Part No.CG-10)
from
$16.99
AT OIL PAN GASKET
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Schaeffler – Shaft Seal (Part No.SS2569)
from
$5.19
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-28)
from
$33.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
National – Bearing Race (Part No.25520)
from
$9.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.LM67010)
from
$4.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
B & M – Cable Bracket (Part No.30498)
from
$33.99
Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.
Product Features:
See More
Product Features:
- Shifter Service Parts
- Steel
- Natural Finish
- Sold individually
- Replacement for Bandit shifters
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)
from
$65.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
B & M – Torque Converter, Nitrous Holeshot 2400 (Part No.20480)
from
$614.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers. Due to torque converter core availability, the actual converter size may vary but performance functionality will be as advertised.
Product Features:
See More
Product Features:
- 2300-2500 RPM
- Small And Big Blocks
- Mild To Serious Performance
- Furnace Brazed
- Fully Balanced
Felpro – Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (Part No.TOS 18621)
from
$9.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Driveworks – Oil Seal (Part No.S-9613S)
from
$4.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Upgrade your 1964 Pontiac Tempest with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 1964 Pontiac Tempest, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Transmission Parts are key to keeping your Tempest functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Transmission Parts for the 1964 Pontiac Tempest, designed to meet your needs without breaking the bank.
From
Transmission Seal
replacements to
Transmission Mounts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1964 Pontiac Tempest at great prices.
Our Transmission Parts inventory for this model
ranges from just $3.99 to $1,126.99, with
an average price of $65.05.
Our 57 Transmission Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 1964 Pontiac Tempest without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 Pontiac Tempest, we stock popular OEM and aftermarket Transmission Parts from top names
like National, Driveworks, Imperial, and more.
National Transmission Parts
start at just $6.99 and boast an impressive 4.3 stars average rating from customers.
Driveworks and Imperial also bring quality to the table, with Transmission Parts available starting at $4.99, and at an average 4.2 stars rating.
With 4,933 customer reviews and counting, our 1964 Pontiac Tempest Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1964 Pontiac Tempest is always ready to roll. We’re committed to providing you with everything you need to keep your Tempest in top shape, all in one place.
Start shopping confidently below for your 1964 Pontiac Tempest!
Best-Selling Transmission Seals for 1964 Pontiac Tempests
Enhance the driving experience in your Pontiac with 11 quality Transmission Seal components, starting at $3.99.
National – Multi-Purpose Seal (Part No.6712NA)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal (Part No.S-9613S)
from
$4.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Pinion Seal (Part No.2043)
from
$3.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
Product Features:
See More
- Design type: springless; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Motive Gear – Pinion Seal (Part No.8610)
from
$4.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More
ATP – AT EXT HOUSING SEAL (Part No.HO-9)
from
$12.99
AT EXT HOUSING SEAL
ATP – AT EXT HOUSING SEAL (Part No.SO-22)
from
$9.59
AT EXT HOUSING SEAL
National – Multi-Purpose Seal (Part No.7038SA)
from
$16.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Schaeffler – General Seal (Part No.SS2784)
from
$18.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Manual Transmission Output Shaft Seal (Part No.471341N)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Schaeffler – Shaft Seal (Part No.SS2569)
from
$5.19
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Most Popular 1964 Pontiac Tempest Transmission Mounts
Customize your Pontiac with 4 Transmission Mounts products
like Transmission Mounts, all
priced under $99.99.
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2378)
from
$11.99
Anchor 2378 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1957-1984
- Weight approx: 2 Lbs
- Height: 1.8 In.: 45.7 mm
- All Bolt Holes Inline
- Bolt Centerline: 1.5 Inch: 38.1 Mm
Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)
from
$99.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.
Product Features:
See More
Product Features:
- Durable Polyurethane
- Absorbs Vibration
- Last Longer Than Rubber
- Built-In Safety Lock
Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Red (Part No.71223030HKR)
from
$53.99
Product Features:
See More
- Durable polyurethane to handle the stress of high horsepower
- Same durometer as other BlackHeart and Hooker poly mounts
- Can be used in place of 1-bolt or 2-bolt mount
- Absorbs vibration and last longer than rubber
- Ideal for use on street or strip applications
- Molded indentions for socket clearance to ease installation
- Complete with Grade 8 mounting hardware
- Bolt Spacing on the Wider Side: 4-inch
- Bolt Spacing on the Narrow Side: 1.5-inch
Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)
from
$48.99
Product Features:
See More
- Durable polyurethane to handle the stress of high horsepower
- Same durometer as other BlackHeart and Hooker poly mounts
- Can be used in place of 1-bolt or 2-bolt mount
- Absorbs vibration and last longer than rubber
- Ideal for use on street or strip applications
- Molded indentions for socket clearance to ease installation
- Complete with Grade 8 mounting hardware
- Bolt Spacing on the Wider Side: 4-inch
- Bolt Spacing on the Narrow Side: 1.5-inch
Top Picks for 1964 Pontiac Tempest Transmission Bearings
Upgrade Pontiac Tempests with top-quality Transmission Bearings parts, including 7 OEM and aftermarket selections for your 1964 model.
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearing Race (Part No.M88010)
from
$8.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Taper Bearing Set (Part No.S-A-36)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$10.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearing Race (Part No.LM67010)
from
$4.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Schaeffler – Cone (Part No.KM86649)
from
$24.29
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Schaeffler – Bearing – TRB (Tapered Roller Bearing) (Part No.KT2)
from
$9.79
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
In-Demand Transmission Cooler and Parts for 1964 Pontiac Tempests
Select from 11 premium Transmission Cooler and Parts parts for your 1964 Pontiac Tempest, with prices ranging from $11.99 to $85.99.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)
from
$61.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 6″
- Sub-compact to compact cars
- GVWR up to 18,000 lbs.
- Compatible with OEM cooler systems
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)
from
$55.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)
from
$80.99
The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Rapid-Cool plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
- Compatible with OEM cooler systems
- Made with the highest quality materials
- 100% pressure testing to 150 PSI for quality assurance
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)
from
$52.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$79.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- Up to Class C motorhomes, towing up to 5,000 pounds
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$25.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
- Made of high grade nylon for easy installation
- Removable buttons for cooler/fan relocation
- Made for both transmission coolers and electric fan installation
- Comes with Quick Connect coupler
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$60.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)
from
$65.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial Econo-Kool tube and fin transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Most Sold 1964 Pontiac Tempest Automatic Transmission Parts
Explore our best-selling Pontiac parts for the 1964 Tempest among 7 OEM and aftermarket options starting from $5.49.
ATP – AT OIL PUMP ORING (Part No.SO-21)
from
$9.59
AT OIL PUMP ORING
Dorman – Clutch Pilot Bushing (sold by each) (Part No.690-023)
from
$5.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
ATP – AT MODULATOR VALVE (Part No.JX-66)
from
$21.99
AT MODULATOR VALVE
ATP – AT FRT PUMP BUSHING (Part No.CB-4)
from
$11.79
AT FRT PUMP BUSHING
B & M – Cable Bracket (Part No.70469)
from
$55.99
Cable Bracket – Powerglide (Bandit style shifters only) APPLICATION: For Powerglide with Pro Bandit (Composite X and Magnum Grip) and rear entry cable.
Product Features:
See More
Product Features:
- Fully Polished/Bright Anodized
- Narrow Design-w/No Knobs
- Lightweight Mechanism
- Reverse Exit Cable Design
- Neutral Safety Switch Built-In
- CNC Machined-6061-T6 Aluminum
- Mounts Through Bottom Of Shifter
- Flush Countersink Hardware Wont Rub Body Panels
B & M – Cable Bracket (Part No.30498)
from
$33.99
Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.
Product Features:
See More
Product Features:
- Shifter Service Parts
- Steel
- Natural Finish
- Sold individually
- Replacement for Bandit shifters
B & M – Cable Bracket (Part No.70460)
from
$31.49
B&M cable bracket fits GM Powerglide transmissions.
Product Features:
See More
Product Features:
- Shifter Service Parts
- Steel
- Natural Finish
- Sold individually
- B&M quality
Top-Rated Transmission Parts Brands For Your 1964 Pontiac Tempest
Shop for the best-rated brands offering Transmission Parts and other products for your 1964 Pontiac Tempests. Below you’ll find some of our best rated Transmission Parts from National, Driveworks, and Imperial, and more. Transmission Parts from these brands that fit a 1964 Tempest start at just $4.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1964 Pontiac Tempest Transmission Parts
When it comes to maintaining or upgrading your 1964 Pontiac Tempest, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1964 Pontiac Tempest. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $8.99. Plus, with over 28 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$8.99
(4)
Bearing Race
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$6.99
(20)
Multi Purpose Seal
“Would have been fine most likely – if correct seal was in the box. For redoing a Front Crank Seal on a 4 cylinder 89 Ranger.”
Popular Driveworks 1964 Pontiac Tempest Transmission Parts
Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 1964 Pontiac Tempest owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1964 Tempest, Advance Auto Parts carries a full inventory of 3 Driveworks Transmission Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these Driveworks Transmission Parts range from $4.99 to $16.49, plus, with more than 51 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
FAQs for 1964 Pontiac Tempest Transmission Parts
Which Transmission Parts are best-sellers for 1964 Pontiac Tempests?
Out of 57 Transmission Parts that fit 1964 Pontiac Tempests, the following parts are the top sellers:
- Taper Bearing Set (5050499) – $8.99
- Transmission Mount: Rear, 1 Piece (5300207) – $11.99
- Multi Purpose Seal (3271471) – $6.99
What’s the price range for 1964 Pontiac Tempest Transmission Parts?
Transmission Part prices for the 1964 Pontiac Tempest start at $3.99 and go up to $1,126.99 for the most premium parts.
What’s the average price of a Transmission Part for a 1964 Pontiac Tempest?
The average price for Transmission Parts for the 1964 Pontiac Tempest is $65.05. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Pontiac Tempest model years?
What are the cheapest Transmission Parts for my 1964 Pontiac Tempest?
The cheapest 1964 Pontiac Tempest Transmission Parts we carry in stock are:
- Differential Pinion Seal (10751056) – $3.99
- Bearing Race (3277461) – $4.29
- Oil Seal (5440610) – $4.99
- Pinion Seal (10751052) – $4.99
- Shaft Seal (50211164) – $5.19
What are the top-rated Transmission Parts that fit the 1964 Pontiac Tempest?
Out of 4,933 reviews by customers, our 1964 Pontiac Tempest Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1964 Pontiac Tempest and their top-rated products:
- Manual Transmission Gaskets
- Manual Transmission Gasket Set (5991978) – $28.99
What types of Transmission Parts do you sell for my 1964 Pontiac Tempest?
As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1964 Pontiac Tempest:
Can I get help with 1964 Pontiac Tempest Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Transmission Parts and more.
What is your return policy for Pontiac Tempest Transmission Parts?
Advance Auto Parts keeps returns simple. For new Pontiac Tempest Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
