1964 Pontiac Tempest Differentials

Essential 1964 Pontiac Tempest Differentials

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Spider Gear Set For GM 8.2" Buick, Olds, Pontiac Dura Grip Posi, 28 Spline (Part No.16144)

Spider Gear Set For GM 8.2" Buick, Olds, Pontiac Dura Grip Posi, 28 Spline

from

$601.99
Yukon spider gear set for GM 8.2″ Buick, Olds, Pontiac Dura Grip posi, 28 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits 8.2″ Buick, Oldsmobile and Pontiac with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – 8.2" Buick, Oldsmobile, Pontiac Cover Gasket, 10 Bolt Holes (Part No.23019)

8.2" Buick, Oldsmobile, Pontiac Cover Gasket, 10 Bolt Holes

from

$13.99
8.2″ Buick, Oldsmobile, Pontiac cover gasket, 10 bolt holes.

Product Features:
  • Cover gasket
  • Fits 8.2″ in Buick, Oldsmobile and Pontiac
See More

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

8.5" & 8.2" GM Carrier Installation Kit

from

$109.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

USA Standard Gear – Master Overhaul Kit for the 8.2" Buick, Olds, Pontiac Differential (Part No.37054)

Master Overhaul Kit for the 8.2" Buick, Olds, Pontiac Differential

from

$279.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 8.2″ Buick, Oldsmobile and Pontiac
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Aluminum Girdle Cover For 8.2" Buick, Pontiac, Oldsmobile GM Ta HD (Part No.32120)

Aluminum Girdle Cover For 8.2" Buick, Pontiac, Oldsmobile GM Ta HD

from

$334.99
Aluminum Girdle cover for 8.2″ Buick, Pontiac, Oldsmobile GM TA HD.

Product Features:
  • Fits 8.2″ Buick, Oldsmobile and Pontiac
  • Aluminum girdle cover
See More

Motive Gear – Pinion Seal (Part No.8610)

Pinion Seal

from

$3.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette (Part No.33345)

Positraction Cross Pin Bolt For For 8.2" GM And Cast Iron Corvette

from

$53.99
Positraction cross pin bolt for for 8.2″ GM CI ‘Vette.

Product Features:
  • Cross pin bolt for GM 8.2″ and 1963-1979 Corvette
  • For OEM positraction applications only
See More

Felpro – Differential Cover Gasket (Part No.RDS 13410)

Differential Cover Gasket

from

$11.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Powertrax – No-Slip Traction System (Part No.9207822801)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Bearing Race Driver (Part No.56017)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM89410 race
    • All steel construction
    See More

    Yukon Gear – Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes (Part No.30229)

    Redi Sleeve For GM 8.5", 9.5" & 8.2" Bop Yokes

    from

    $57.99
    8.5, 9.5, & 8.2 Buick, Oldsmobile, Pontiac GM REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 8.5″, 9.5″ and 8.2″ Buick, Oldsmobile and Pontiac
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G888355)

    Performance Differential Ring and Pinion

    from

    $241.99


    Product Features:
    • GM 12BL 8.875 R/P 3.55 CAR
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Motive Gear – Differential Crush Sleeve (Part No.3954480)

    Differential Crush Sleeve

    from

    $5.49


    Product Features:
    • CRUSH SLEEVE 12 BLT CAR
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Motive Gear – Differential Gear Install Kit (Part No.GM12IKC)

    Differential Gear Install Kit

    from

    $64.49


    Product Features:
    • MINI INSTALL KIT GM 12BLT 8.875 CAR
    See More

    Pro-King – Differential Ring Gear Bolt (Part No.742G935)

    Differential Ring Gear Bolt

    from

    $1.99
    Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

    Product Features:
    • All products are designed to meet or exceed OE quality, form, fit and funtion.
    See More

    Motive Gear – Pinion Nut (Part No.1260823)

    Pinion Nut

    from

    $8.49
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

    3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

    from

    $4.99
    3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

    Product Features:
    • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
    See More

    Motive Gear – Differential Mini Spool (Part No.MS10C-28)

    Differential Mini Spool

    from

    $98.99


    Product Features:
    • MINI SPOOL GM 10 BOLT 8.2″ 28 SPLINE
    See More

    Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

    Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

    from

    $21.99
    Product Features:
    • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
    See More

    Yukon Gear – Conversion Kit (Part No.41184)

    Conversion Kit

    from

    $289.99
    Product Features:
    • Fits GM 8.2″ Buick, Oldsmobile and Pontiac
    • Adapt GM gears for BOP housing
    See More

    Yukon Gear – 1541H Alloy Rear Axle For GM 8.2" (Part No.21289)

    1541H Alloy Rear Axle For GM 8.2"

    from

    $234.99
    Yukon 1541H alloy rear axle for GM 8.2″ with length of 29-7/8″ and 28 splines axle shaft for use with Buick, Oldsmobile, and Pontiac. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. long splines can be chopped off.

    Product Features:
    • Fits 8.2″ Buick, Oldsmobile and Pontiac
    • 28 spline
    • 29 7/8″ long
    See More

    Yukon Gear – Pinion Install Kit For GM 8.2" Differential For Buick, Pontiac, And Oldsmobile (Part No.13068)

    Pinion Install Kit For GM 8.2" Differential For Buick, Pontiac, And Oldsmobile

    from

    $282.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 8.2″ Buick, Oldsmobile and Pontiac
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.5PR)

    Differential Bearing Kit - Koyo

    from

    $94.49
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • BRG & SEAL KIT-10 BOLT “P” AXLE
    See More

    Motive Gear – Differential Super Bearing Kit – Timken (Part No.R12CRSKT)

    Differential Super Bearing Kit - Timken

    from

    $156.99
    All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
    See More

    Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.5PRMKT)

    Differential Master Bearing Kit - Timken

    from

    $111.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • MASTER KIT GM 10 BOLT ‘P’ AXLE
    See More

    1964 Pontiac Tempest Differentials

    Maybe you’re in the middle of a full rebuild of that 1964 Pontiac Tempest. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 78 different Differentials in our inventory ranging from $0.91 to $1,566.99. That means you can find the exact parts or products you need to keep that 1964 Pontiac Tempest running smoothly.

    Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Pontiac Tempest. Valvoline, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1964 Pontiac Tempest, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 528 reviews in this category, some of the top rated parts include Shaft Repair Sleeve with 5.0 stars and Differential Cover Gasket with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1964 Pontiac Tempest rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1964 Pontiac Tempest Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Pontiac Tempest demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Tempest the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Driveworks Differentials

    We carry Driveworks parts in our stock across Differential Pinion Seals categories, plus more. For a 1964 Pontiac Tempest, our most popular Driveworks Differentials include:
    Oil Seal
    from $7.79
    (1)
    Oil Seal
    Differential Pinion Seals

    FAQs for 1964 Pontiac Tempest Differentials

    What are the most purchased Differentials for the 1964 Pontiac Tempest?

    Out of 78 Differentials for the 1964 Pontiac Tempest, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Pinion Nut
    from $8.49
    (1)
    Pinion Nut
    Differential Pinion Shaft Nuts
    Pinion Seal
    from $3.99
    This product is not rated
    Pinion Seal
    Differential Pinion Seals

    What are the top-rated 1964 Pontiac Tempest Differentials?

    Top-rated Differentials for your 1964 Pontiac Tempest based on customer reviews/ratings are:
    Shaft Repair Sleeve
    from $43.99
    (2)
    Shaft Repair Sleeve
    “As a mechanic I dont have time or money to waste on inferior products, which this is not. Great product,great price”
    Differential Cover Gasket
    from $11.49
    (1)
    Differential Cover Gasket
    “Correct for 64-69 factory installed rear axle”