1964 Mercury Cyclone Exhaust Manifold and Headers
More 1964 Mercury Cyclone Exhaust Manifold and Headers
Find your specific 1964 Mercury Cyclone original or aftermarket Exhaust Manifold and Headers below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Mercury Cyclone Exhaust Manifold and Headers
Taylor Gaskets – Vibe-Lock Bolt (Part No.310001)
from
$102.99
Vibe-Lock Bolt
Mr. Gasket – Exhsthdrbolt (Part No.2231G)
from
$56.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 16 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Hooker Headers – Competition Header (Part No.6920-1HKR)
from
$753.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.6102HKR)
from
$789.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Patriot Exhaust – H8411-1 1 3/4" Full Length Header Ford Mustang 351C 67-70 Coated (Part No.H8411-1)
from
$516.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8411-1 1 3/4″ Full Length Header Ford Mustang 351C 67-70 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Hooker Headers – Competition Header (Part No.6901-1HKR)
from
$619.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Hooker Headers – Super Comp. Header (Part No.6116HKR)
from
$727.99
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- Long Tube Lengths
- Long Transition Collectors
- Monstrous Low-Mid Range Torque
- Keep Top End Horsepower
- Provides Finest Fit
- Most Durable Design Available
Patriot Exhaust – H8403 1 5/8" Full Length Header Ford Mustang Small Block Ford 64-73 Raw (Part No.H8403)
from
$324.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8403 1 5/8″ Full Length Header Ford Mustang Small Block Ford 64-73 Raw
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Patriot Exhaust – H8411 1 3/4" Full Length Header Ford Mustang 351C 67-70 Raw (Part No.H8411)
from
$309.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8411 1 3/4″ Full Length Header Ford Mustang 351C 67-70 Raw
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Hooker Headers – Competition Header (Part No.6915HKR)
from
$331.99
LS1 full length engine swap header fits 66-72 Chevelle, El Camino, Monte Carlo and Sprint applications. Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler and Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.
Product Features:
See More
Product Features:
- High Performance
- Affordable
- Durable 16 Gauge Material
- Welds Easier
- Lasts Longer
- Heat Cured
- High Heat Resistant
Flowtech – Ceramic Header (Part No.32118FLT)
from
$490.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Ceramic Headers
- Rust And Corrosion Resistance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Patriot Exhaust – H8408 1 3/4" Full Length Header Ford Mustang 351C 67-70 Raw (Part No.H8408)
from
$309.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8408 1 3/4″ Full Length Header Ford Mustang 351C 67-70 Raw
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Patriot Exhaust – H8407-1 1 3/4" Full Length Header Ford Mustang 351C 64-70 Coated (Part No.H8407-1)
from
$496.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8407-1 1 3/4″ Full Length Header Ford Mustang 351C 64-70 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Patriot Exhaust – H8403-1 1 5/8" Full Length Header Ford Mustang Small Block Ford 64-73 Coated (Part No.H8403-1)
from
$585.99
Full length and fenderwell headers provide the ultimate performance for streetrodders with high performance engines. These header styles have longer primarytubes, which help produce more horsepower and torque than Tight Tucks. Chassisheaders fit inside
Product Features:
See More
Product Features:
- Patriot Exhaust H8403-1 1 5/8″ Full Length Header Ford Mustang Small Block Ford 64-73 Coated
- Full length headers are typically used for higher RPM horsepower, but can also increase the mid range torque in applications were there is room to fit a long tube design.
Popular 1964 Mercury Cyclone Exhaust Manifold and Headers Categories
1964 Mercury Cyclone Exhaust Manifold and Headers
Maybe you’re in the middle of a full rebuild of that 1964 Mercury Cyclone. Maybe you just need a couple of Exhaust Manifold and Headers. Either way, Advance Auto Parts has 2 different Exhaust Manifold and Headers in our inventory ranging from $102.99 to $789.99. That means you can find the exact parts or products you need to keep that 1964 Mercury Cyclone running smoothly.
Exhaust Manifold and Headers are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Mercury Cyclone. Taylor Gaskets and Hooker Headers are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Exhaust Manifold and Headers for your 1964 Mercury Cyclone, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Exhaust Manifold and Headers to keep your 1964 Mercury Cyclone rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Exhaust Manifold and Headers Brands To Make Your 1964 Mercury Cyclone Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Mercury Cyclone demands trusted brand parts and products to keep it running. Many trusted brands of Exhaust Manifold and Headers make up Advance Auto Parts’ inventory, and all are ready to help make your Cyclone the best it can be. Be sure to browse some of our top Exhaust Manifold and Headers brands and parts.
FAQs for 1964 Mercury Cyclone Exhaust Manifold and Headers
What are the most purchased Exhaust Manifold and Headers for the 1964 Mercury Cyclone?
Out of 2 Exhaust Manifold and Headers for the 1964 Mercury Cyclone, the most popular in our inventory are:
