1964 Mercury Cyclone Clutch Systems
Find Your Specific 1964 Mercury Cyclone Clutch Systems
Below you will find various in-demand Mercury Clutch Systems, components and accessories for your 1964 Cyclone. Advance Auto Parts has popular Cyclone parts like Flywheels, Clutch Pressure Plates, Clutch Bell Housings and more. You’ll also find aftermarket and OEM Clutch Systems for other Cyclone model years including
1965,
1966,
1967,
1968,
1969,
1970,
1971 and more. Select a category of 1964 Mercury Cyclone Clutch Systems below and start saving instantly.
Popular 1964 Mercury Cyclone Clutch Systems Categories
Essential Clutch Systems for 1964 Mercury Cyclones
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-242)
from
$128.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-158)
from
$81.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – M/T FLYWHEEL (Part No.Z-401)
from
$231.99
M/T FLYWHEEL
Hays – Flywheels (Part No.12-242)
from
$495.99
Flywheels
National – Multi Purpose Bearing (Part No.1505)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.2065)
from
$28.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1625)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.614038)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)
from
$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
- 0.78″ Underhead Length
ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)
from
$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.
Product Features:
See More
Product Features:
- 1/2″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 1985 & Earlier Ford 289-460 V8
- 5/16″-18 Thread Size
- 200,000 PSI
- 0.78″ Underhead Length
- Sold As A Kit
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-502)
from
$37.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$26.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
Lakewood – Block Plate For 15210 (Part No.15741)
from
$218.99
Exact replacement safety block plates meet S.F. I. safety requirements. A must for block protection and required by most racing associations.
Product Features:
See More
Product Features:
- A Must For Block Protection
- Required By Most Racing Associations
- Must Be Used To Meet S.F.I Safety Requirements
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
Upgrade your 1964 Mercury Cyclone with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 1964 Mercury Cyclone, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Clutch Systems are key to keeping your Cyclone functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Clutch Systems for the 1964 Mercury Cyclone, designed to meet your needs without breaking the bank.
From
Flywheel
replacements to
Clutch Pressure Plates
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1964 Mercury Cyclone at great prices.
Our Clutch Systems inventory for this model
ranges from just $13.99 to $999.99, with
an average price of $75.91.
Our 12 Clutch Systems in stock come from 5 trusted brands, so you’re sure to find the right part for your 1964 Mercury Cyclone without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1964 Mercury Cyclone is always ready to roll. We’re committed to providing you with everything you need to keep your Cyclone in top shape, all in one place.
Start shopping confidently below for your 1964 Mercury Cyclone!
Best-Selling Flywheels for 1964 Mercury Cyclones
Enhance the driving experience in your Mercury with 4 quality Flywheel components, starting at $25.99.
ATP – M/T FLYWHEEL (Part No.Z-401)
from
$231.99
M/T FLYWHEEL
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
Most Popular 1964 Mercury Cyclone Clutch Pressure Plates
Customize your Mercury with 2 Clutch Pressure Plates products
like Clutch Pressure Plates, all
priced under $14.99.
ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)
from
$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
- 0.78″ Underhead Length
ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)
from
$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.
Product Features:
See More
Product Features:
- 1/2″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 1985 & Earlier Ford 289-460 V8
- 5/16″-18 Thread Size
- 200,000 PSI
- 0.78″ Underhead Length
- Sold As A Kit
Top Picks for 1964 Mercury Cyclone Clutch Bell Housings
Upgrade Mercury Cyclones with top-quality Clutch Bell Housings parts, including 1 OEM and aftermarket selections for your 1964 model.
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
In-Demand Clutch Release Bearings for 1964 Mercury Cyclones
Select from 5 premium Clutch Release Bearings parts for your 1964 Mercury Cyclone, with prices ranging from $23.99 to $51.99.
National – Multi Purpose Bearing (Part No.2065)
from
$28.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.614038)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1505)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1625)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-614034)
from
$23.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAQs for 1964 Mercury Cyclone Clutch Systems
Which Clutch Systems are best-sellers for 1964 Mercury Cyclones?
Out of 12 Clutch Systems that fit 1964 Mercury Cyclones, the following parts are the top sellers:
- Multi Purpose Bearing (3273032) – $28.49
- Multi Purpose Bearing (5052777) – $51.99
- Multi Purpose Bearing (5040221) – $25.99
What’s the price range for 1964 Mercury Cyclone Clutch Systems?
Clutch System prices for the 1964 Mercury Cyclone start at $13.99 and go up to $999.99 for the most premium parts.
What’s the average price of a Clutch System for a 1964 Mercury Cyclone?
The average price for Clutch Systems for the 1964 Mercury Cyclone is $75.91. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Mercury Cyclone model years?
What are the cheapest Clutch Systems for my 1964 Mercury Cyclone?
The cheapest 1964 Mercury Cyclone Clutch Systems we carry in stock are:
- ARP Pressure Plate Clutch Cover Bolt Kit (11530156) – $13.99
- For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (11530068) – $14.99
- Clutch Release Bearing (5040043) – $23.99
- Multi Purpose Bearing (5040000) – $24.99
- Multi Purpose Bearing (5040221) – $25.99
What types of Clutch Systems do you sell for my 1964 Mercury Cyclone?
As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 1964 Mercury Cyclone:
Can I get help with 1964 Mercury Cyclone Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Clutch Systems and more.
What is your return policy for Mercury Cyclone Clutch Systems?
Advance Auto Parts keeps returns simple. For new Mercury Cyclone Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
