1964 Mercury Commuter Alternators and Starters
Find Your Specific 1964 Mercury Commuter Alternators and Starters
Below you will find various in-demand Mercury Alternators and Starters, components and accessories for your 1964 Commuter. Advance Auto Parts has popular Commuter parts like Ignition Lock Parts, Voltage Regulator Parts, Starter Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other Commuter model years including
1959,
1960,
1961,
1962,
1963,
1965,
1966,
1967,
1968 and more. Select a category of 1964 Mercury Commuter Alternators and Starters below and start saving instantly.
Popular 1964 Mercury Commuter Alternators and Starters Categories
Essential Alternators and Starters for 1964 Mercury Commuters
Carquest Premium – Starter Solenoid (Part No.SBC3196)
from
$44.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1003)
from
$36.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1002)
from
$35.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Multi-Use Connector (Part No.PTA1079)
from
$4.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – New Voltage Regulator (Part No.RAG1002)
from
$73.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – New Voltage Regulator (Part No.RAA1016)
from
$139.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – New Voltage Regulator (Part No.RAA1496)
from
$47.49
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – Starter Bushing (Part No.SBA5146)
from
$1.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
National – Multi-Purpose Bearing (Part No.203)
from
$19.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.203-S)
from
$21.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.200-CC)
from
$21.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Driveworks – Ball Bearing (Part No.SL-204-FF)
from
$11.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Ignition Lock Cylinder (Part No.CSA1478)
from
$8.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Ignition Lock Cylinder Assembly (Part No.926-068)
from
$10.49
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Locksmart – Ignition Lock Cylinder (Part No.LC14020)
from
$11.49
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
- Constructed from high-grade materials to ensure durability and longevity
- Undergoes 100% testing for proper fit, form, and function
- As a global manufacturer, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Ignition Lock Cylinder (Part No.CSA1569)
from
$12.99
The Ignition switch is the main power switched distribution point in every vehicle. The ignition switch in some manner will be connected directly to the vehicle battery and then supply power out to every operating system in the vehicle that is required to be connected and disconnected from the vehicle’s battery or power source.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.3185SN)
from
$112.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest Professional – Starter: New, Limited Lifetime Warranty (Part No.3131SN)
from
$151.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Product Features:
Carquest HD Electrical – Starter: New, 12V, 9 Tooth (Part No.72-3132N)
from
$195.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Carquest HD Electrical – Starter: New (Part No.72-3115N)
from
$222.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Carquest HD Electrical – Starter: New, 12V, 9 Tooth (Part No.72-3124N)
from
$147.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Carquest Premium – Starter Brush (Part No.XAA1018)
from
$19.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Brush (Part No.XAA1027)
from
$8.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Upgrade your 1964 Mercury Commuter with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 1964 Mercury Commuter, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercury or enhancing its overall performance, Alternators and Starters are key to keeping your Commuter functioning at its best. At Advance Auto Parts, we offer a wide selection of 15 Alternators and Starters for the 1964 Mercury Commuter, designed to meet your needs without breaking the bank.
From
Ignition Lock Part
replacements to
Voltage Regulator Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 1964 Mercury Commuter at great prices.
Our Alternators and Starters inventory for this model
ranges from just $1.49 to $202.99, with
an average price of $37.30.
Our 15 Alternators and Starters in stock come from 5 trusted brands, so you’re sure to find the right part for your 1964 Mercury Commuter without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 Mercury Commuter, we stock popular OEM and aftermarket Alternators and Starters from top names
like Carquest Premium DriveWorks, and more.
Carquest Premium Alternators and Starters
start at just $129.99 and boast an impressive 4.4 stars average rating from customers.
With 15 customer reviews and counting, our 1964 Mercury Commuter Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1964 Mercury Commuter is always ready to roll. We’re committed to providing you with everything you need to keep your Commuter in top shape, all in one place.
Start shopping confidently below for your 1964 Mercury Commuter!
Best-Selling Ignition Lock Parts for 1964 Mercury Commuters
Enhance the driving experience in your Mercury with 1 quality Ignition Lock Part components, starting at $10.49.
Dorman – Ignition Lock Cylinder Assembly (Part No.926-068)
from
$10.49
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Most Popular 1964 Mercury Commuter Voltage Regulator Parts
Customize your Mercury with 3 Voltage Regulator Parts products
like Voltage Regulators and
Voltage Regulator Connectors, all
priced under $73.99.
Carquest Premium – New Voltage Regulator (Part No.RAA1496)
from
$47.49
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Carquest Premium – Multi-Use Connector (Part No.PTA1079)
from
$4.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – New Voltage Regulator (Part No.RAG1002)
from
$73.99
CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.
Product Features:
See More
Product Features:
- CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
- CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
- CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.
Top Picks for 1964 Mercury Commuter Starter Parts
Upgrade Mercury Commuters with top-quality Starter Parts parts, including 6 OEM and aftermarket selections for your 1964 model.
Carquest Premium – Starter: Remanufactured, Limited Lifetime Warranty (Part No.3123S)
from
$129.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Solenoid (Part No.SBC3196)
from
$44.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest – Starter Solenoid (Part No.84C1002)
from
$35.99
The Starter Solenoid is the relay of the starting circuit that carries the high amperage required when the starter motor is engaged. The solenoid is typically energized by the starter switch when commanded by the vehicle operator. Starter solenoids may also be used in other high amperage circuits, compare solenoid specification to your circuit needs before installing.
Product Features:
See More
Product Features:
- Application matched component to ensure the system can be returned to like new condition.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest HD Electrical – Starter: New, 12V, 9 Tooth (Part No.72-3123N)
from
$202.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- High quality components form the foundation our parts are built from. Transpo┐s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Carquest Premium – Starter Brush (Part No.XAA1018)
from
$19.99
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Carquest Premium – Starter Bushing (Part No.SBA5146)
from
$1.49
The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
In-Demand Alternator Parts for 1964 Mercury Commuters
Select from 5 premium Alternator Parts parts for your 1964 Mercury Commuter, with prices ranging from $13.49 to $73.99.
Driveworks – Ball Bearing (Part No.SL-203-FF)
from
$13.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi-Purpose Bearing (Part No.203)
from
$19.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.MNJ-471-S)
from
$14.49
Product Features:
See More
- RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.200-CC)
from
$21.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.304-DD)
from
$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Top-Rated Alternators and Starters Brands For Your 1964 Mercury Commuter
Shop for the best-rated brands offering Alternators and Starters and other products for your 1964 Mercury Commuters. Below you’ll find some of our best rated Alternators and Starters from Carquest Premium and DriveWorks, and more. Alternators and Starters from these brands that fit a 1964 Commuter start at just $13.49 and are rated as high as 4.4 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Premium 1964 Mercury Commuter Alternators and Starters
When it comes to maintaining or upgrading your 1964 Mercury Commuter, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Alternators and Starters, specifically designed for the 1964 Mercury Commuter. With over 1 Carquest Premium brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $129.99. Plus, with over 2 customer reviews and an average rating of 4.4 stars, you can trust that our Carquest Premium Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular DriveWorks 1964 Mercury Commuter Alternators and Starters
DriveWorks auto parts is one of the highest quality Alternators and Starter brands in the market. Any 1964 Mercury Commuter owner should feel confident when installing genuine DriveWorks parts in their vehicle. To ensure the best fit and performance for your 1964 Commuter, Advance Auto Parts carries a full inventory of 1 DriveWorks Alternators and Starters. Plus you will be keeping your Mercury in peak condition while saving money because prices on these DriveWorks Alternators and Starters range up to $13.49, plus, with more than 7 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
FAQs for 1964 Mercury Commuter Alternators and Starters
Which Alternators and Starters are best-sellers for 1964 Mercury Commuters?
Out of 15 Alternators and Starters that fit 1964 Mercury Commuters, the following parts are the top sellers:
- Starter Solenoid (12447282) – $44.99
- Starter Solenoid (12453400) – $35.99
- New Voltage Regulator (12450511) – $47.49
What’s the price range for 1964 Mercury Commuter Alternators and Starters?
Alternators and Starter prices for the 1964 Mercury Commuter start at $1.49 and go up to $202.99 for the most premium parts.
What’s the average price of a Alternators and Starter for a 1964 Mercury Commuter?
The average price for Alternators and Starters for the 1964 Mercury Commuter is $37.30. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Mercury Commuter model years?
What are the cheapest Alternators and Starters for my 1964 Mercury Commuter?
The cheapest 1964 Mercury Commuter Alternators and Starters we carry in stock are:
- Starter Bushing (12574156) – $1.49
- Multi-Use Connector (12473461) – $4.99
- Ignition Lock Cylinder Assembly (50210359) – $10.49
- Ball Bearing (5050642) – $13.49
- Multi-Purpose Bearing (3277607) – $14.49
What are the top-rated Alternators and Starters that fit the 1964 Mercury Commuter?
Out of 15 reviews by customers, our 1964 Mercury Commuter Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 1964 Mercury Commuter and their top-rated products:
- Starter Parts
- Starter: Remanufactured, Limited Lifetime Warranty (99994412) – $129.99
- Alternator Parts
- Starter: Remanufactured, Limited Lifetime Warranty (99994412) – $129.99
What types of Alternators and Starters do you sell for my 1964 Mercury Commuter?
As of 11/2/25, these are some of the most in-demand types of Alternators and Starters for a 1964 Mercury Commuter:
Can I get help with 1964 Mercury Commuter Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercury Alternators and Starters and more.
What is your return policy for Mercury Commuter Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Mercury Commuter Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
