1964 GMC 3500 Air Intakes

Essential Air Intakes for 1964 GMC 3500s

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)

Engine Intake Manifold Gasket Set

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing (Part No.1288)

Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing

from

$99.99
This Edelbrock Fuel Log kit #1284 is an exact replica of the original design used by Vic Sr. in the 1950’s. They are made from extruded aluminum tube with a 3/8″ threaded outlet at each end and a polished finish. Kit includes, black neoprene hose, Corbin

Product Features:
  • Polished Log
  • Brass Fittings
  • Black Neoprene Hose
  • 5-1/2 in. Outlet Spacing
  • Includes Hose Clamps
See More

Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)

Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs

from

$284.99
Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i
See More

Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)

Torker II Intake Manifold Small-Block Chevy

from

$267.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.

Product Features:
  • 2500 to 6500 RPM High Performance Street Engines
  • Single-Plane Low-Rise Intake Good for High RPM
  • Ideal for Applications with Limited Hood Clearance
  • For Top-End HP and Adequate Throttle Response
  • Not for Mileage or Emissions Applications
  • For Trucks or Vans Use PN[2701] Instead
  • Not for LT1 or Chevy Bowtie Heads
  • Not for 1987 and Later Stock Aluminum Heads
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.26011)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$674.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Polished Finish Produces Brilliant Shine
  • Ideal for Street Rods and Street Machines
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold

from

$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)

Performer RPM Small Block Chevy Intake Manifold

from

$281.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6550 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy

from

$376.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg .Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Fits Both Spread and Square Bore Carburetors
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)

Performer RPM Small Block Chevy Polished Intake Manifold

from

$578.99


Product Features:
  • Polished Version Of Edelbrock PN[7101]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Felpro – Carburetor Mounting Gasket (Part No.9394)

Carburetor Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9249)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9093)

Carburetor Mounting Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9033)

Carburetor Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9288)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Carburetor Float (Part No.779-8067B)

Carburetor Float

from

$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)

For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss

from

$44.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
  • 1″ Long
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Upgrade your 1964 GMC 3500 with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 1964 GMC 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Air Intakes are key to keeping your 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 25 Air Intakes for the 1964 GMC 3500, designed to meet your needs without breaking the bank. From Carburetor Part replacements to Intake Manifold Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 1964 GMC 3500 at great prices. Our Air Intakes inventory for this model ranges from just $1.99 to $900.99, with an average price of $266.74. Our 25 Air Intakes in stock come from 6 trusted brands, so you’re sure to find the right part for your 1964 GMC 3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 GMC 3500, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, Mr. Gasket, Edelbrock, and more. FELPRO Air Intakes start at just $1.99 and boast an impressive 5 stars average rating from customers. Mr. Gasket and Edelbrock also bring quality to the table, with Air Intakes available starting at $15.49, and at an average 4 stars rating. With 19 customer reviews and counting, our 1964 GMC 3500 Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1964 GMC 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your 3500 in top shape, all in one place. Start shopping confidently below for your 1964 GMC 3500!

Best-Selling Carburetor Parts for 1964 GMC 3500s

Enhance the driving experience in your GMC with 6 quality Carburetor Part components, starting at $1.99.

Felpro – Carburetor Mounting Gasket (Part No.9288)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9249)

Carburetor Mounting Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9394)

Carburetor Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Carburetor Float (Part No.779-8067B)

Carburetor Float

from

$18.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Edelbrock – Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing (Part No.1288)

Triple Carburetor Fuel Log Kit #1288 with 5-1/2 in. Outlet Spacing

from

$99.99
This Edelbrock Fuel Log kit #1284 is an exact replica of the original design used by Vic Sr. in the 1950’s. They are made from extruded aluminum tube with a 3/8″ threaded outlet at each end and a polished finish. Kit includes, black neoprene hose, Corbin

Product Features:
  • Polished Log
  • Brass Fittings
  • Black Neoprene Hose
  • 5-1/2 in. Outlet Spacing
  • Includes Hose Clamps
See More

Felpro – Carburetor Mounting Gasket (Part No.9033)

Carburetor Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Most Popular 1964 GMC 3500 Intake Manifold Parts

Customize your GMC with 19 Intake Manifold Parts products like Intake Manifold Gasket Sets, Intake Manifolds, and Intake Manifold Bolt Sets, all priced under $900.99.

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy (Part No.2601)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy

from

$376.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg .Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Fits Both Spread and Square Bore Carburetors
  • Also in Polished/PermaStar/EnduraShine Finish
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9617)

Engine Intake Manifold Gasket Set

from

$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)

Performer RPM Small Block Chevy AIR-Gap Intake Manifold

from

$356.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake
  • For Square Bore Carburetors Only
See More

Edelbrock – Torker II Intake Manifold Small-Block Chevy (Part No.5001)

Torker II Intake Manifold Small-Block Chevy

from

$267.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Not for mileage or emissions applications. For trucks or vans use PN(2701) instead. Not for LT1 or Chevy bowtie heads. Not for 1987 and later stock aluminum heads. Available in cast or polished.

Product Features:
  • 2500 to 6500 RPM High Performance Street Engines
  • Single-Plane Low-Rise Intake Good for High RPM
  • Ideal for Applications with Limited Hood Clearance
  • For Top-End HP and Adequate Throttle Response
  • Not for Mileage or Emissions Applications
  • For Trucks or Vans Use PN[2701] Instead
  • Not for LT1 or Chevy Bowtie Heads
  • Not for 1987 and Later Stock Aluminum Heads
See More

Edelbrock – Performer RPM Small Block Chevy Intake Manifold (Part No.7101)

Performer RPM Small Block Chevy Intake Manifold

from

$281.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6550 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
  • Edelbrock Total Power Package Maximizes Gains
  • Also in Polished/PermaStar/EnduraShine Finish
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)

For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers

from

$47.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
See More

Edelbrock – Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2023)

Single-Quad Manifold and carb Kit for 1957-86 Small-Block Chevy

from

$900.99
The Edelbrock #2023 Single-Quad Manifold and carb kit is designed for 1957-86 Small-Block Chevy applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • Performer RPM Manifold
  • Made In The USA
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)

Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold

from

$713.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.

Product Features:
  • Polished Version Of Edelbrock PN[7501]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)

Pro-Flo XT Small Block Chevy EFI Black Intake Manifold

from

$711.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp

Product Features:
  • 1500-7000 RPM Range
  • Single Plane Type-Throttle Body XT Style Flange
  • 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
  • Black Powder Coated Finish
  • Made In The USA
See More

Edelbrock – Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.26011)

Performer Air-Gap Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$674.99


Product Features:
  • Based on Performer Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • Polished Finish Produces Brilliant Shine
  • Ideal for Street Rods and Street Machines
See More

Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)

Performer RPM Small Block Chevy Polished Intake Manifold

from

$578.99


Product Features:
  • Polished Version Of Edelbrock PN[7101]
  • Polish is Hand-Buffed for Brilliant Shine
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$504.99


Product Features:
  • Polished Version Of Edelbrock PN[2701]
  • Polish is Hand-Buffed for Brilliant Shine
  • Maximizes Performance with Edelbrock Carburetors
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)

Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold

from

$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Weiand – Team G Intake Manifold (Part No.7532)

Team G Intake Manifold

from

$389.99
Team G Intake Manifold

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

from

$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Edelbrock – Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs (Part No.2040)

Chevrolet SB Performer EPS Manifold w/ Gaskets, Bolts, Studs

from

$284.99
Edelbrock part #2040 Manifold Installation kit will simplify the process of adding more power and efficiency to your street rod or muscle car. It combines all the necessary components to replace your stock iron intake manifold with an Edelbrock aluminum i
See More

ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)

For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss

from

$44.99
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Precision Machined Threads For Secure Engagement, And Would not Rust
  • Wide Under Head Flange And Companion Washers Provide Even Load Distribution
  • Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
  • Facilitates Optimum Sealing Of Gasket Surfaces
  • 1″ Long
See More

Top-Rated Air Intakes Brands For Your 1964 GMC 3500

Shop for the best-rated brands offering Air Intakes and other products for your 1964 GMC 3500s. Below you’ll find some of our best rated Air Intakes from FELPRO, Mr. Gasket, and Edelbrock, and more. Air Intakes from these brands that fit a 1964 3500 start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1964 GMC 3500 Air Intakes

When it comes to maintaining or upgrading your 1964 GMC 3500, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 1964 GMC 3500. With over 5 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.99, with an average price of just $6.11. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Carburetor Mounting Gasket
from
$3.29
This product is not rated

Carburetor Mounting Gasket

“”

Carburetor Mounting Gasket
from
$1.99
This product is not rated

Carburetor Mounting Gasket

“”

Carburetor Mounting Gasket
from
$1.99
This product is not rated

Carburetor Mounting Gasket

“”

Popular Mr. Gasket 1964 GMC 3500 Air Intakes

Mr. Gasket auto parts is one of the highest quality Air Intake brands in the market. Any 1964 GMC 3500 owner should feel confident when installing genuine Mr. Gasket parts in their vehicle. To ensure the best fit and performance for your 1964 3500, Advance Auto Parts carries a full inventory of 2 Mr. Gasket Air Intakes. Plus you will be keeping your GMC in peak condition while saving money because prices on these Mr. Gasket Air Intakes range from $15.49 to $32.09, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

Intake Manifold Bolts
from
$15.49

(12)

Intake Manifold Bolts

“Product is very reasonable in price and works great”

Intake Manifold Bolts
from
$32.09

(5)

Intake Manifold Bolts

“Excellent product.”

FAQs for 1964 GMC 3500 Air Intakes

Which Air Intakes are best-sellers for 1964 GMC 3500s?

Out of 25 Air Intakes that fit 1964 GMC 3500s, the following parts are the top sellers:

What’s the price range for 1964 GMC 3500 Air Intakes?

Air Intake prices for the 1964 GMC 3500 start at $1.99 and go up to $900.99 for the most premium parts.

What’s the average price of a Air Intake for a 1964 GMC 3500?

The average price for Air Intakes for the 1964 GMC 3500 is $266.74. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other GMC 3500 model years?

Yes, we currently carry Air Intakes for 6 model years of GMC 3500s between 1960 and 1966. Air Intakes are bought most frequently for the following model years: 1966, 1965, 1963, 1962, 1961, and 1960.

What are the cheapest Air Intakes for my 1964 GMC 3500?

The cheapest 1964 GMC 3500 Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 1964 GMC 3500?

Out of 19 reviews by customers, our 1964 GMC 3500 Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 1964 GMC 3500 and their top-rated products:

What types of Air Intakes do you sell for my 1964 GMC 3500?

Can I get help with 1964 GMC 3500 Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Air Intakes and more.

What is your return policy for GMC 3500 Air Intakes?

Advance Auto Parts keeps returns simple. For new GMC 3500 Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.