1964 Dodge W200 Series Performance Engines
More 1964 Dodge W200 Series Performance Engines
Find your specific 1964 Dodge W200 Series original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Dodge W200 Series Performance Engines
Competition Cams – Engine Valve Spring Kit (Part No.911-16)
from
$759.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757
Product Features:
See More
Product Features:
- Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
- O.D.: 1.524″, I.D.: 1.110″
- Single valve springs with damper
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)
from
$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7592)
from
$28.99
Product Features:
See More
- 5/16 in. Thick
- Conforms to warped flanges, giving them better sealing capabilities
- Graphite-impregnated facing and steel expanded metal core
- Does not deteriorate or crack under excessive heat and pressure
- Sold as a pair
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1611)
from
$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – Valve Cover Gasket Set for Chrysler (Part No.7591)
from
$44.99
Product Features:
See More
- 0.1875 in. Thickness
- Core-Reinforced-Composite Material
- For Late Model 1963-1980 BB Chrysler W/ 6-Bolt Valve Covers
- Set of 2
- Made In The USA
Mr. Gasket – Valve Cover Gasket Set (Part No.379)
from
$36.49
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$17.49
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-212-2)
from
$1093.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-222-3)
from
$378.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Weiand – Hi-Ram Intake Manifold (Part No.1995)
from
$703.99
Hi-Ram Intake Manifold
Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)
from
$397.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)
from
$473.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Dual-Plane High-Rise Intake
- Accepts Early-Style Waterneck
Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)
from
$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
Product Features:
See More
Product Features:
- Assures Accurate Torque App
- Prevents Galling Manifold
- Grade 5 Material
- Black Oxide Coasted
Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)
from
$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Spectre – Water Neck; Chrysler (Part No.4739)
from
$23.79
Spectre’s Chrysler water neck fits 1964 and later Chrysler V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.
Product Features:
See More
Product Features:
- Fits 1964 and later Chrysler V8 engines
- Includes bolts
- Chrome plated
- Easy to install
- O-ring/gasket not included
Popular 1964 Dodge W200 Series Performance Engines Categories
1964 Dodge W200 Series Performance Engines
Maybe you’re in the middle of a full rebuild of that 1964 Dodge W200 Series. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 12 different Performance Engines in our inventory ranging from $17.49 to $1,093.99. That means you can find the exact parts or products you need to keep that 1964 Dodge W200 Series running smoothly.
Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Dodge W200 Series. Mr. Gasket, Spectre, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1964 Dodge W200 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 27 reviews in this category, some of the top rated parts include Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 with 1.0 stars.
So if you’re in the market for aftermarket Performance Engines to keep your 1964 Dodge W200 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1964 Dodge W200 Series Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Dodge W200 Series demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your W200 Series the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Mr. Gasket Performance Engines
We carry Mr. Gasket parts in our stock across Performance Engine Valve Cover Gasket Sets and Performance Engine Coolant Thermostats categories, plus more. For a 1964 Dodge W200 Series, our most popular Mr. Gasket Performance Engines include:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
FAQs for 1964 Dodge W200 Series Performance Engines
What are the most purchased Performance Engines for the 1964 Dodge W200 Series?
Out of 12 Performance Engines for the 1964 Dodge W200 Series, the most popular in our inventory are:
from
$26.99
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
from
$17.49
This product is not rated
Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers
Performance Intake Manifold Hardware
What are the top-rated 1964 Dodge W200 Series Performance Engines?
Top-rated Performance Engines for your 1964 Dodge W200 Series based on customer reviews/ratings are:
from
$111.99
(1)
Sure Seat Valve Springs for Ford 429/460 V8 1969-1987
“THIS WAS NOT A COMPLETE KIT!ONLY GOT VALVE SPRINGS!!!”
