1964 Dodge D300 Series Differentials

Essential 1964 Dodge D300 Series Differentials

Yukon Gear – Powr Lok Belleville Clutch Plate, Splined (Part No.16174)

Powr Lok Belleville Clutch Plate, Splined

from

$36.99
Product Features:
  • Belleville plate, splined
  • Fits Dana Spicer 44 Powr Lok
See More

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread

from

$7.99
Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
  • 7/8″ x 14 thread
  • 1 5/16″ socket
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-544)

Differential Pinion Yoke Assembly

from

$181.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

from

$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 60
  • Fits standard open and Trac Loc applications
See More

Yukon Gear – Bearing Install Kit For Chrysler 8.75" Four Pinion (#42) Differential (Part No.11009)

Bearing Install Kit For Chrysler 8.75" Four Pinion (#42) Differential

from

$344.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Chrysler 8.75″ ’42’ case housing with 25520 carrier races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, marking compound and brush.
See More

Yukon Gear – Zip Locker Switch (Part No.34015)

Zip Locker Switch

from

$16.99
ZIP locker switch.

Product Features:
  • Switch
See More

USA Standard Gear – Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up (Part No.59017)

Steel Spool For Dana 60 With 30 Spline Axles, 4.56 & Up

from

$369.99
Product Features:
  • Fits Chrysler Dana Spicer 60 with 30 spline axles
  • 4.56 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

FAG US – CUP (Part No.15245)

CUP

from

$8.89
CUP

Powertrax – Grip PRO Traction System (Part No.GT436035)

Grip PRO Traction System

from

$596.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.56 Ratio, Thick (Part No.24606)

High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 4.56 Ratio, Thick

from

$489.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 60
  • 9.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
  • Thick gear for 4.11 and down carrier
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)

Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 60, 70, 70U and 70HD
See More

USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

Power Lok Positraction for Chrysler 8.75"

from

$1015.00
USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

Product Features:
  • Gear Power Lok Posi LSD
  • Fits Chrysler 8.75″
  • Smooth design
  • Positraction
See More

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70

from

$13.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 60, 70, 70U and 70HD
See More

Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)

DIFFERENTIAL GASKET

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Differential (Part No.26040)

Differential

from

$939.99
Differential

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Preload Shim Kit For Chrysler 8.75" & Ford 9"

from

$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:
  • Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
See More

Yukon Gear – Carrier Installation Kit For Dana 60 Differential (Part No.57005)

Carrier Installation Kit For Dana 60 Differential

from

$194.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Dana Spicer 60
  • Includes carrier bearings and races and carrier shim kit
See More

Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)

Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18

from

$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.

Product Features:
  • Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
  • 1/2″ x 18 thread
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 70 & 70HD (Part No.55019)

Replacement Carrier Shim Kit For Dana 70 & 70HD

from

$126.99
Product Features:
  • Carrier shim kit
  • Fits Dana Spicer 70 and 70HD
See More

Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)

Pinion Install Kit For Dana 60 Rear Differential

from

$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 60 rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1118)

Differential Pinion Shim Kit

from

$6.49


Product Features:
  • DANA PRELOAD SHIMS (D60 & D70)
See More

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$15.99
Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • Side adjuster lock bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

USA Standard Gear – Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings (Part No.37090)

Master Overhaul Kit For Chrysler 8.75" #42 Housing With LM104912/49 Carrier Bearings

from

$441.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Chrysler 8.75″ ’42’ case housing with LM104912 carrier races
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

1964 Dodge D300 Series Differentials

Maybe you’re in the middle of a full rebuild of that 1964 Dodge D300 Series. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 233 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1964 Dodge D300 Series running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Dodge D300 Series. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1964 Dodge D300 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 62 reviews in this category, some of the top rated parts include DIFFERENTIAL GASKET with 3.0 stars and Bearings with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1964 Dodge D300 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1964 Dodge D300 Series Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Dodge D300 Series demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your D300 Series the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Bearings categories, plus more. For a 1964 Dodge D300 Series, our most popular Driveworks Differentials include:
Tapered Roller Bearing
from $8.49
(7)
Tapered Roller Bearing
Differential Bearings

Top 1964 Dodge D300 Series Differentials from National

National products are another trusted brand when it comes to Differentials for your 1964 Dodge D300 Series. Popular National parts include:
Bearings
from $9.99
(8)
Bearings
Rear Differential Pinion Bearings
Bearings
from $22.99
(3)
Bearings
Differential Bearings
Bearings
from $38.49
(2)
Bearings
Front Differential Pinion Bearings

FAQs for 1964 Dodge D300 Series Differentials

What are the most purchased Differentials for the 1964 Dodge D300 Series?

Out of 233 Differentials for the 1964 Dodge D300 Series, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $8.99
This product is not rated
Bearings
Differential Bearings
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts

What are the top-rated 1964 Dodge D300 Series Differentials?

Top-rated Differentials for your 1964 Dodge D300 Series based on customer reviews/ratings are:
DIFFERENTIAL GASKET
from $8.29
(4)
DIFFERENTIAL GASKET
“Great Product”
Bearings
from $20.99
(2)
Bearings
“this is not a front wheel bearing”
Differential Cover Gasket
from $15.99
(1)
Differential Cover Gasket
“OEM only uses silicone , the gasket set with a thin layer of silicone is a much better sealant method”