1964 Dodge A100 Differentials

Essential 1964 Dodge A100 Differentials

National – Bearings (Part No.M804049)

Bearings

from

$38.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Pinion Nut (Part No.33142)

Pinion Nut

from

$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.

Product Features:
  • Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
  • 7/8″ x 14 thread
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – Side Gear And Thrust Washer Kit For 8.25" Chrysler, 27 Spline Only (Part No.33277)

Side Gear And Thrust Washer Kit For 8.25" Chrysler, 27 Spline Only

from

$218.99
Side gear thrust washer kit for 8.25″ Chrysler, 27 spline only.

Product Features:
  • Side gear thrust washer kit
  • Fits Chrysler 8.25″ with 27 spline axles
See More

Yukon Gear – Bearing Install Kit For Chrysler 8.75" Four Pinion (#89) Differential (Part No.11010)

Bearing Install Kit For Chrysler 8.75" Four Pinion (#89) Differential

from

$289.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits Chrysler 8.75″ ’89’ case housing with 25520 carrier races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, marking compound and brush.
See More

Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)

Powr Lok Flat Driven Plate For Dana 44

from

$31.99
Product Features:
  • Driven plate
  • Fits Dana Spicer 44 Powr Lok
See More

Yukon Gear – 0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35 (Part No.33334)

0.260" Diameter Cross Pin Roll Pin For 8.75" Chrysler, 8", 9" Ford, And Model 20 And 35

from

$5.99
0.260″ diameter cross pin roll pin for 8.75″ Chrysler, 8″, 9″ Ford, and Model 20 and 35.

Product Features:
  • Roll pin for Chrysler 8.75″, Ford 8″ and 9″, AMC Model 20 and Model 35
  • 0.260″ diameter
See More

Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)

Standard Open Spider Gear Kit For '96 And Older 8.25" Chrysler With 27 Spline Axles

from

$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Chrysler 8.25″ open differntial with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #41 Housing with 25520/90 Differential bearings (Part No.37092)

Master Overhaul Kit for Chrysler 8.75" #41 Housing with 25520/90 Differential bearings

from

$349.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Chrysler 8.75″ ’41’ case housing with 25520 carrier races
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Yukon Gear – Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size (Part No.41008)

Yoke For Chrysler 8.75" With 10 Spline Pinion And A 7290 U/Joint Size

from

$246.99
Yukon yoke for Chrysler 8.75″ with 10 spline pinion and a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. This yoke uses straps. OEM design. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 8.75″
  • 10 spline
  • 7290 u-joint size
  • Inside snap ring design
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Strap style
See More

Yukon Gear – Steel Cover For Chrysler 8.25" (Part No.32312)

Steel Cover For Chrysler 8.25"

from

$159.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Fits Chrysler 8.25″
  • Steel
See More

FAG US – CONE (Part No.KLM102949)

CONE

from

$21.99
CONE

Motive Gear – Ring Gear Bolt (Part No.1304)

Ring Gear Bolt

from

$7.99


Product Features:
  • CHRY 8 3/4″ RING GEAR BOLTS C 8.25″
See More

USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)

8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron

from

$474.99
Product Features:
  • Dropout housing
  • Fits Chrylser 8.75″
  • ’89’ case design
  • Nodular iron for added strength
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)

Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Chrysler 8.25″ with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc

from

$5.99
Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 60
  • Fits standard open and Trac Loc applications
See More

National – Multi Purpose Seal (Part No.5126)

Multi Purpose Seal

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt (Part No.33230)

Model 35 (Standard Open & Tracloc) 8.25" Chrysler Tracloc Cross Pin Bolt

from

$13.99
Model 35 (standard Open & TracLoc) 8.25″ Chrysler TracLoc cross pin bolt.

Product Features:
  • Cross pin bolt for AMC Model 35 with c-clip axles
See More

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Differential Crush Sleeve

from

$2.49


Product Features:
  • CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000
See More

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

from

$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:
  • Pinion nut washer
  • Fits Chrysler 8.75″ with 10 spline pinion
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)

8.25" Chrysler Cover Gasket

from

$12.99
8.25″ Chrysler cover gasket.

Product Features:
  • Cover gasket
  • Fits Chrysler 8.25″
See More

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Differential Carrier Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Powertrax – Lock Right Locker (Part No.1240-LR)

Lock Right Locker

from

$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#41) Differential (Part No.13005)

    Pinion Install Kit For Chrysler 8.75" (#41) Differential

    from

    $292.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits Chrysler 8.75″ ’41’ case
    • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
    See More

    USA Standard Gear – Open Spider Gear Set For Chrysler 8.25", 27 Spline (Part No.39002)

    Open Spider Gear Set For Chrysler 8.25", 27 Spline

    from

    $209.99
    USA Standard Gear open spider gear set for Chrysler 8.25″, 27 spline .

    Product Features:
    • Spider gear kit
    • Fits Chrysler 8.25″ 27 spline open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    1964 Dodge A100 Differentials

    Maybe you’re in the middle of a full rebuild of that 1964 Dodge A100. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 144 different Differentials in our inventory ranging from $2.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1964 Dodge A100 running smoothly.

    Differentials are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Dodge A100. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

    We know you’ll find the perfect Differentials for your 1964 Dodge A100, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 23 reviews in this category, some of the top rated parts include Differential Pinion Shim Kit with 5.0 stars and Differential Crush Sleeve with 5.0 stars.

    So if you’re in the market for aftermarket Differentials to keep your 1964 Dodge A100 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

    Differentials Brands To Make Your 1964 Dodge A100 Last

    Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Dodge A100 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your A100 the best it can be. Be sure to browse some of our top Differentials brands and parts.

    Popular Felpro Differentials

    We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1964 Dodge A100, our most popular Felpro Differentials include:
    Differential Carrier Gasket
    from $6.49
    (1)
    Differential Carrier Gasket
    Automatic Transmission Differential Carrier Gaskets

    Top 1964 Dodge A100 Differentials from National

    National products are another trusted brand when it comes to Differentials for your 1964 Dodge A100. Popular National parts include:
    Bearings
    from $38.49
    (2)
    Bearings
    Front Differential Pinion Bearings
    Bearings
    from $20.99
    (2)
    Bearings
    Front Differential Pinion Bearings

    FAQs for 1964 Dodge A100 Differentials

    What are the most purchased Differentials for the 1964 Dodge A100?

    Out of 144 Differentials for the 1964 Dodge A100, the most popular in our inventory are:
    3 Qt - 80W90 Conventional Gear Oil With Posi Additive
    from $57.99
    This product is not rated
    3 Qt – 80W90 Conventional Gear Oil With Posi Additive
    Differential Oil
    Bearings
    from $8.99
    This product is not rated
    Bearings
    Differential Bearings
    Pinion Nut
    from $8.49
    (1)
    Pinion Nut
    Differential Pinion Shaft Nuts

    What are the top-rated 1964 Dodge A100 Differentials?

    Top-rated Differentials for your 1964 Dodge A100 based on customer reviews/ratings are:
    Differential Pinion Shim Kit
    from $7.49
    (1)
    Differential Pinion Shim Kit
    “good product”
    Differential Crush Sleeve
    from $2.49
    (1)
    Differential Crush Sleeve
    “High quality, would buy again”