1964 Chevrolet Corvette Performance Ignition Products

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.”

“Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “”choke””. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor. The MSD’s 8.5mm spark plug terminals feature Dual Crimp terminals. As the name implies, the terminals feature two crimps; one for the sleeve of the wire and another separate crimp to grasp the conductor.”

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

This combination is encased in a heavy duty sleeve that will withstand abrasion and high temperatures. Cap off each end with our Dual Crimp Terminals and you have the best wire available.

The Street Fire Spark Plug Wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve.

The oversized 8.8mm wire features a double silicone construction rated at over 600 F and 60kV. High gloss black silicone wire jacket not only looks great, but resists heat extremes, petrochemicals, ozone and moisture better than so-called blended materials for greater durability and longer life. High-density, high-temperature silicone insulation provides greater dielectric strength and eliminates arcing and the effects of corona better than typical OE style rubber materials. All-Kevlar stranded inner core and fiberglass braiding add greater pull strength and terminal retention. Stainless steel and brass terminals provide unsurpassed electrical conductivity and excellent corrosion resistance compared to terminals made of common or plated metals.

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

MSD Ignition multiple spark coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high RPM performance! The MSC delivers up to three times the current of the stock coils. Plus, the coils fire multiple times!

“Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.”

These coils mount directly in place of factory style versions and accept the OEM connectors as well. Performance output is improved thanks to a careful selection of better materials and efficient winding ratios.

GM Dual connector coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Connector and Plug Wire are on Opposite Ends.

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary.

The Mallory Promaster Classic series ignition coil is designed to meet today’s specialized ignition requirements. This coil features a faster rise time and increased spark duration (compared to stock) to increase performance. It has a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This coil also offers excellent wire retention with a spark plug type secondary post, and brass contact terminals.

3-wire for ignition box. PERFORMANCE PARTS>PERFORMANCE IGNITION/STARTING/CHARGING>IGNITION>IGNITION ACCESSORIES & OTHER from Mallory

Requires a 1.4 ohms Ballast resistor, Loom resistor or internally resisted coil.

The kit allows you to remove or bypass the low-powered HEI module and coil and replace them with the MSD Digital 6AL Ignition Control and the Blaster SS high output coil. The result is more power, increased rpm range, easier starting, plus better mileage and performance. The Kit includes the new MSD Digital 6AL Ignition, Blaster SS Coil, coil wire and HEI dust cover . The 6AL has a Soft Touch Rev Control to protect your engine from overrev damage.

The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD.

These harnesses allow you to easily connect the 6LS or 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings.

These harnesses allow you to easily connect the 6LS or 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings.

For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions.