1964 Chevrolet Chevy II Drivetrains
More 1964 Chevrolet Chevy II Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1964 Chevrolet Chevy II, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1964 Chevrolet Chevy II Drivetrains
Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)
from
$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 7.5″, 7.625″ and 8.2″
Richmond Gear – RngPnnInstlKt (Part No.83-1019-1)
from
$199.99
RngPnnInstlKt
Yukon Gear – Positraction Cross Pin Bolt For GM 12 Bolt Car And Truck (Part No.33344)
from
$28.99
Positraction cross pin bolt for GM 12P and 12T.
Product Features:
See More
Product Features:
- Cross pin bolt for GM 12 bolt passenger car and truck
- For OEM positraction applications only
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.49
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Yukon Gear – Dura Grip Case, GM 12 Bolt Car, 3 Series (Part No.20104)
from
$386.99
GM 12P DURA GRIP case, bare, 3.08-3.90, 30spline & 33spline.
Product Features:
See More
Product Features:
- Dura Grip positraction carrier case
- Does not include spider gears
- Fits GM 12 bolt passenger car
- 3.08 – 3.90 ratios only
Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio (Part No.26012)
from
$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car with 33 spline axles
- 3.08-3.90 ratios only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – Chevy ’55-’64 Car And Truck Dropout Gasket (Part No.23017)
from
$13.99
55P Chevy Passenger Drop Out gasket.
Product Features:
See More
Product Features:
- Cover gasket
- Fits 1955-1964 GM passenger car
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 8.2" GM & CI Vette Positraction Cross Pin Shaft (Part No.33411)
from
$73.99
8.2″ GM & CI Vette positraction cross pin shaft.
Product Features:
See More
Product Features:
- Cross pin shaft for GM 8.2″ and 1963-1979 Corvette
- Fits standard open and positraction applications
National – Shaft Repair Sleeve (Part No.99152)
from
$40.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)
from
$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)
from
$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits 1955-1964 GM truck and passenger car
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Pro-King – Differential Ring Gear Bolt (Part No.742J935)
from
$0.91
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
USA Standard Gear – Spartan Locker For GM 12 Bolt Car & Truck With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17032)
from
$672.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.
Product Features:
See More
Product Features:
- Fits GM 12 bolt car and truck with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – High Performance Ring & Pinion Gear Set For GM 8.2" In A 3.73 Ratio (Part No.24151)
from
$499.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits GM 8.2″
- 8.20″ ring gear diameter
- 25 spline pinion
- 10 ring gear bolts
- 3.73 ratio
Yukon Gear – Yoke For GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)
from
$198.99
Yukon yoke for GM 12 bolt car & truck, 1310 u/joint size, u-bolt design. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
National – Bearings (Part No.LM67048)
from
$9.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – GM 8.2" Crush Sleeve (Part No.33103)
from
$16.99
GM 8.2″ crush sleeve w/OEM ring & pinion (NOT AFTERMARKET ring & pinion). 2.470″ long.
Product Features:
See More
Product Features:
- Crush sleeve for GM 8.2″ with OEM ring and pinion set
- 2.470″ tall
Yukon Gear – Positraction Clutch Guide (Part No.33352)
from
$8.99
Positraction clutch guide.
Product Features:
See More
Product Features:
- Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
- Compatible with Dura Grip positractions only
Yukon Gear – Aluminum Girdle Cover For 8.2" And 8.5" GM Ta HD (Part No.32121)
from
$396.99
Aluminum Girdle cover for 8.2″ and 8.5″ GM TA HD.
Product Features:
See More
Product Features:
- Fits GM 8.5″ and 8.6″
- Aluminum girdle cover
Yukon Gear – Axle Seal For 5707 Or 1563 Bearing (Part No.30196)
from
$6.99
Axle seal for 5707 OR 1563 bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.250″ O.D.
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
National – Bearings (Part No.M86610)
from
$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)
from
$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.
Product Features:
See More
Product Features:
- Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
Yukon Gear – Star Washer For GM 12 Bolt Posi Cross Pin Bolt (Part No.33348)
from
$5.99
Star washer for GM 12 bolt posi cross pin bolt.
Product Features:
See More
Product Features:
- Star washer
- Fits GM 12 bolt passenger car
Popular 1964 Chevrolet Chevy II Drivetrains Categories
1964 Chevrolet Chevy II Drivetrains
You count on your 1964 Chevrolet Chevy II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 243 Drivetrains ranging in price from $0.91 to $994.99, you’re sure to find everything you need for your 1964 Chevrolet Chevy II.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Moog, and Driveworks. 1964 Chevrolet Chevy II Drivetrains start as low as $0.91!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 11,011 extensive product reviews on 1964 Chevrolet Chevy II Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.8 stars and Greaseable Super Strength Universal Joint with 4.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1964 Chevrolet Chevy II below to get started!
Top-Rated Drivetrains Brands For Your 1964 Chevrolet Chevy II
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Chevrolet Chevy II running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1964 Chevrolet Chevy II back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1964 Chevrolet Chevy II, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1964 Chevrolet Chevy II Drivetrains
What are the most purchased Drivetrains for the 1964 Chevrolet Chevy II?
Out of 243 Drivetrains for the 1964 Chevrolet Chevy II, the most popular in our inventory are:
What are the top-rated 1964 Chevrolet Chevy II Drivetrains?
Top-rated Drivetrains for your 1964 Chevrolet Chevy II based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
