1964 Chevrolet C30 Pickup Ignition Coils and Boots
More 1964 Chevrolet C30 Pickup Ignition Coils and Boots
Find your specific 1964 Chevrolet C30 Pickup original or aftermarket Ignition Coils and Boots below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Chevrolet C30 Pickup Ignition Coils and Boots
Carquest – Ignition Coil (Part No.E70)
from
$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.
Product Features:
See More
Product Features:
- Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
- High temperature enameled wires were specified for better insulation and performance
- A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
- Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
- As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
Mallory – Universal Street Performance Ignition Coil (Part No.29219)
from
$76.99
Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.
Product Features:
See More
Product Features:
- 12 Volt Coil
- Oil-Filled Design
- Arch Resistant Alkyd Top
- Designed To Deliver Optimum Performance
Driveworks – Ignition Coil (Part No.26189)
from
$35.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
Carquest – Ignition Coil (Part No.26C1078)
from
$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.
Product Features:
See More
Product Features:
- High output
- Long spark duration
- High dielectric strength
- Corrosion resistant connections
- High reliability
- Long service life
Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)
from
$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Long service life and durable performance
- High dielectric strength for reliability
- Corrosion-resistant connections
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
- High reliability
- Long service life
Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)
from
$41.49
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
- 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
- Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
ACDelco – Ignition Coil (Part No.U505)
from
$78.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
- Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
- Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$49.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)
from
$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)
from
$63.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
MSD Ignition – Wire Set; Street Fire; Chevy 366-454; Socket (Part No.5561)
from
$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
NGK – NGK Wire Set (Part No.51428)
from
$39.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8040)
from
$57.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Accel – 8Mm Super Stock Copper Uni (Part No.4038)
from
$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
DENSO – Spark Plug Wire Set: Carbon Core, 7 Wire Set (Part No.671-6044)
from
$39.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
- Identical OE end caps are designed to “click” into place for easy installation and a secure fit
- Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
Accel – 8Mm Super Stock Graphite Uni (Part No.4041K)
from
$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)
from
$145.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Accel – Universal Fit Super Stock 8mm Suppression; Spark Plug Wire Set (Part No.4040K)
from
$65.99
These ACCEL wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with black wire contain zinc-plated steel terminals. Noise suppression core. Set contains 8 plug wires with coil lead.
Product Features:
See More
Product Features:
- 7mm And 8mm High Gloss Silicone Jacket
- 450° F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- RFI Suppression For Street Driven Applications
- Custom-fit Universal And Import Coverage
- High-strength Fiberglass Braid Construction
NGK – NGK Wire Set (Part No.51434)
from
$40.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
Accel – GM Bb 396-502 Hei (Part No.9013C)
from
$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.
Product Features:
See More
Product Features:
- Ceramic boots withstand up to 2,000░ Fahrenheit
- Ceramic boots withstand up to 2,000° Fahrenheit
- 8mm double silicone construction black wire rated at 600░ F rated
- 8mm double silicone construction black wire rated at 600° F rated
- 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
- Universal and custom fit applications
- Universal And Custom Fit Applications
Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)
from
$91.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
NGK – NGK Wire Set (Part No.51417)
from
$29.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding
Product Features:
See More
Product Features:
- PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
- BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
- STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
- CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
MSD Ignition – Wire Set; Street Fire; Chevy 454; HEI; 74-76 (Part No.5560)
from
$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
MSD Ignition – Wire Set; Black Super Conductor; Big Block Chevy; Socket (Part No.31373)
from
$158.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)
from
$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.
Product Features:
See More
Product Features:
- 500 Ohms/ft Of Resistance
- 550 F Rated Silicone Jacket
- Stainless Steel Plug Terminals
- High RFI Suppression For Street And Strip Use
- Universal And Import Coverage
- High-strength Fiberglass Braid Construction
- Pre And Post HEI Vehicles
- 8mm High Gloss Silicone Jacket
MSD Ignition – Wire Set; Super Conductor; Chevy 454; HEI; 74-76; (Part No.31369)
from
$158.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Bolt-on Performance
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket (Part No.31593)
from
$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Less than 50 ohms per foot for superior spark
- Ferro-magnetic impregnated core creates an effective EMI choke
- 40 ft. Of Conductor Wound Into A Single Foot Of Wire
- For high EMI suppression
- Conductor core features Dupont Kevlar material
- Proprietary compound sleeves for resistance to high heat/abrasion
Popular 1964 Chevrolet C30 Pickup Ignition Coils and Boots Categories
1964 Chevrolet C30 Pickup Ignition Coils and Boots
Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet C30 Pickup. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 20 different Ignition Coils and Boots in our inventory ranging from $11.99 to $181.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet C30 Pickup running smoothly.
Ignition Coils and Boots are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet C30 Pickup. Carquest, Carquest Premium, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Coils and Boots for your 1964 Chevrolet C30 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 149 reviews in this category, some of the top rated parts include 8Mm Super Stock Spiral Uni Bu with 3.9 stars and 8Mm Super Stock Spiral Uni Bk with 3.6 stars.
So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1964 Chevrolet C30 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Coils and Boots Brands To Make Your 1964 Chevrolet C30 Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet C30 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your C30 Pickup the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.
Popular Carquest Ignition Coils and Boots
We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1964 Chevrolet C30 Pickup, our most popular Carquest Ignition Coils and Boots include:
Top 1964 Chevrolet C30 Pickup Ignition Coils and Boots from MSD Ignition
MSD Ignition products are another trusted brand when it comes to Ignition Coils and Boots for your 1964 Chevrolet C30 Pickup. Popular MSD Ignition parts include:
from
$145.99
(1)
Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor
Ignition Coil Boots
FAQs for 1964 Chevrolet C30 Pickup Ignition Coils and Boots
What are the most purchased Ignition Coils and Boots for the 1964 Chevrolet C30 Pickup?
Out of 20 Ignition Coils and Boots for the 1964 Chevrolet C30 Pickup, the most popular in our inventory are:
from
$41.49
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
from
$35.49
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
What are the top-rated 1964 Chevrolet C30 Pickup Ignition Coils and Boots?
Top-rated Ignition Coils and Boots for your 1964 Chevrolet C30 Pickup based on customer reviews/ratings are:
from
$91.99
(5)
8Mm Super Stock Spiral Uni Bk
“I’m very happy with my 8mm spiral wires from Accel. Installed in a 94 deville 4.9 and it looks like a factory install other than the labeled wires. My”
