1963 Studebaker Taxi Fuel and Emissions Systems

Essential Fuel and Emissions Systems for 1963 Studebaker Taxis

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Fuel Pump Mounting Gasket

from

$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$61.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Upgrade your 1963 Studebaker Taxi with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 1963 Studebaker Taxi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Studebaker or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Taxi functioning at its best. At Advance Auto Parts, we offer a wide selection of 3 Fuel and Emissions Systems for the 1963 Studebaker Taxi, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Fuel Tanks upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1963 Studebaker Taxi at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.79 to $61.99, with an average price of $25.76. Our 3 Fuel and Emissions Systems in stock come from 3 trusted brands, so you’re sure to find the right part for your 1963 Studebaker Taxi without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters and more to make sure your 1963 Studebaker Taxi is always ready to roll. We’re committed to providing you with everything you need to keep your Taxi in top shape, all in one place. Start shopping confidently below for your 1963 Studebaker Taxi!

Best-Selling Fuel Pumps for 1963 Studebaker Taxis

Enhance the driving experience in your Studebaker with 2 quality Fuel Pump components, starting at $2.79.

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$61.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Fuel Pump Mounting Gasket

from

$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Most Popular 1963 Studebaker Taxi Fuel Tanks

Customize your Studebaker with 1 Fuel Tanks products like Fuel Tank Cleaning Kits, all priced under $12.49.

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

FAQs for 1963 Studebaker Taxi Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 1963 Studebaker Taxis?

Out of 3 Fuel and Emissions Systems that fit 1963 Studebaker Taxis, the following parts are the top sellers:

What’s the price range for 1963 Studebaker Taxi Fuel and Emissions Systems?

Fuel and Emissions System prices for the 1963 Studebaker Taxi start at $2.79 and go up to $61.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 1963 Studebaker Taxi?

The average price for Fuel and Emissions Systems for the 1963 Studebaker Taxi is $25.76. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Studebaker Taxi model years?

Yes, we currently carry Fuel and Emissions Systems for 8 model years of Studebaker Taxis between 1955 and 1964. Fuel and Emissions Systems are bought most frequently for the following model years: 1964, 1962, 1961, 1960, 1959, 1958, 1957, 1956, and 1955.

What are the cheapest Fuel and Emissions Systems for my 1963 Studebaker Taxi?

The cheapest 1963 Studebaker Taxi Fuel and Emissions Systems we carry in stock are:

What are the top-rated Fuel and Emissions Systems that fit the 1963 Studebaker Taxi?

Out of 37 reviews by customers, our 1963 Studebaker Taxi Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 1963 Studebaker Taxi and their top-rated products:

What types of Fuel and Emissions Systems do you sell for my 1963 Studebaker Taxi?

As of 4/10/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1963 Studebaker Taxi:

Can I get help with 1963 Studebaker Taxi Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Studebaker Fuel and Emissions Systems and more.

What is your return policy for Studebaker Taxi Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Studebaker Taxi Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.