1963 GMC 3500 Fuel and Emissions Systems
Find Your Specific 1963 GMC 3500 Fuel and Emissions Systems
Below you will find various in-demand GMC Fuel and Emissions Systems, components and accessories for your 1963 3500. Advance Auto Parts has popular 3500 parts like Exhaust Gas Recirculation (EGR) Parts, Fuel Tanks, Fuel Rails and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other 3500 model years including
1960,
1961,
1962,
1964,
1965,
1966 and more. Select a category of 1963 GMC 3500 Fuel and Emissions Systems below and start saving instantly.
Popular 1963 GMC 3500 Fuel and Emissions Systems Categories
Essential Fuel and Emissions Systems for 1963 GMC 3500s
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$61.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Carquest Premium – Mechanical Fuel Pump 1541126: Includes Gasket (Part No.1541126)
from
$32.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Mechanical Fuel Pump 1542675: Includes Gasket (Part No.1542675)
from
$152.99
Carquest Premium mechanical fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Upgrade your 1963 GMC 3500 with Top-Quality Fuel and Emissions Systems
When it comes to maintaining or upgrading your 1963 GMC 3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your 3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Fuel and Emissions Systems for the 1963 GMC 3500, designed to meet your needs without breaking the bank.
From
Exhaust Gas Recirculation (EGR) Part
replacements to
Fuel Tanks
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 1963 GMC 3500 at great prices.
Our Fuel and Emissions Systems inventory for this model
ranges from just $2.79 to $211.99, with
an average price of $63.60.
Our 12 Fuel and Emissions Systems in stock come from 7 trusted brands, so you’re sure to find the right part for your 1963 GMC 3500 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1963 GMC 3500 is always ready to roll. We’re committed to providing you with everything you need to keep your 3500 in top shape, all in one place.
Start shopping confidently below for your 1963 GMC 3500!
Best-Selling Exhaust Gas Recirculation (EGR) Parts for 1963 GMC 3500s
Enhance the driving experience in your GMC with 1 quality Exhaust Gas Recirculation (EGR) Part components, starting at $83.99.
Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)
Most Popular 1963 GMC 3500 Fuel Tanks
Customize your GMC with 1 Fuel Tanks products
like Fuel Tank Cleaning Kits, all
priced under $12.49.
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Top Picks for 1963 GMC 3500 Fuel Rails
Upgrade GMC 3500s with top-quality Fuel Rails parts, including 1 OEM and aftermarket selections for your 1963 model.
Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)
from
$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X
Product Features:
See More
Product Features:
- Black AnodizedFinish
- High Capacity Fuel Rails
- For Use W/ Pro-Flo XT Manifold #7137
- -6 AN Inlet / Outlet
- Made In The USA
In-Demand Fuel Pumps for 1963 GMC 3500s
Select from 9 premium Fuel Pumps parts for your 1963 GMC 3500, with prices ranging from $2.79 to $174.99.
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Mr. Gasket – Electric Fuel Pump (Part No.12S)
from
$61.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer or Booster Pump
- Not designed for use on aircraft of any type.
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)
from
$10.99
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Properly Aligned
- Conventional Hex Heads
- Rust-Proof Stainless Bolts
- 170,000 PSI
Carquest Premium – Mechanical Fuel Pump 1542656: Includes Gasket (Part No.1542656)
from
$94.99
Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)
from
$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).
Product Features:
See More
Product Features:
- Hi-Vol 0.5 in. NPT Inlet/Outlet
- Large Alcohol-Proof Diaphragm
- Aircraft-Type Allen Bolts
- Produces 10 psi
- For Gasoline Only
- Finest Quality Material
- Beautifully Detailed
- Use w/Fuel Pressure Regulator PN[8190]
Carquest Premium – Mechanical Fuel Pump 1542675: Includes Gasket (Part No.1542675)
from
$152.99
Carquest Premium mechanical fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
KAI – Fuel Pump Module Assembly (Part No.FMD010083)
from
$62.99
New Platinum Pro Fuel Pump Module
Product Features:
See More
Product Features:
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Edelbrock – Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (Part No.4020)
from
$34.99
Edelbrock part #4020 is a mechanical fuel pump block off plate for small-block Chevy applications. It is a billet aluminum part with counter sunk bolt holes.
Product Features:
See More
Product Features:
- Black Anodized Finish
- Billet Aluminum Material
- Mounting Hardware Included
- Includes 1.5 mm Gasket
- For Small-Block Chevy
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
FAQs for 1963 GMC 3500 Fuel and Emissions Systems
Which Fuel and Emissions Systems are best-sellers for 1963 GMC 3500s?
Out of 12 Fuel and Emissions Systems that fit 1963 GMC 3500s, the following parts are the top sellers:
- Fuel Tank Cleaning Kit (11692237) – $12.49
- For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (11530006) – $10.99
- EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (6340091) – $83.99
What’s the price range for 1963 GMC 3500 Fuel and Emissions Systems?
Fuel and Emissions System prices for the 1963 GMC 3500 start at $2.79 and go up to $211.99 for the most premium parts.
What’s the average price of a Fuel and Emissions System for a 1963 GMC 3500?
The average price for Fuel and Emissions Systems for the 1963 GMC 3500 is $63.60. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC 3500 model years?
What are the cheapest Fuel and Emissions Systems for my 1963 GMC 3500?
The cheapest 1963 GMC 3500 Fuel and Emissions Systems we carry in stock are:
- Fuel Pump Mounting Gasket (12548153) – $2.79
- For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (11530006) – $10.99
- Fuel Tank Cleaning Kit (11692237) – $12.49
- Mechanical Fuel Pump Block-Off Plates for Big-Block Chevy (12257407) – $34.99
- Electric Fuel Pump (5400015) – $61.99
What types of Fuel and Emissions Systems do you sell for my 1963 GMC 3500?
As of 4/10/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 1963 GMC 3500:
Can I get help with 1963 GMC 3500 Fuel and Emissions System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.
What is your return policy for GMC 3500 Fuel and Emissions Systems?
Advance Auto Parts keeps returns simple. For new GMC 3500 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
