1963 Dodge D100 Series Performance and Racing Products
Find Your Specific 1963 Dodge D100 Series Performance and Racing Products
Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 1963 D100 Series. Advance Auto Parts has popular D100 Series parts like Performance Valve Covers, Performance Distributors, Performance Ignition Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other D100 Series model years including
1960,
1961,
1962,
1964,
1965,
1966,
1967 and more. Select a category of 1963 Dodge D100 Series Performance and Racing Products below and start saving instantly.
Popular 1963 Dodge D100 Series Performance and Racing Products Categories
Essential Performance and Racing Products for 1963 Dodge D100 Series
Mr. Gasket – Valve Cover (Part No.9806)
from
$96.99
Chrome plated stamped steel valve covers have a flat smooth top, with internal baffles. Tall-style cover provides extra valve train clearance. Sold as a pair. Will not fit Magnum style heads.
Product Features:
See More
Product Features:
- Fits Chrysler small block (pre-Magnum style heads)
- Chrome plated steel
- Tall-style covers provide extra clearance
- Sold as a pair
- Cadmium Plated To Resist Corrosion
- Easy Installation
MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)
from
$194.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)
from
$497.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Dual-Plane High-Rise Intake
- Accepts Early-Style Waterneck
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)
from
$15.79
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.
Product Features:
See More
Product Features:
- Rolled Edges For Strength
- Ideal For Magnetos
- Ideal For Ignition Distributor
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7804)
from
$101.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Competition Cams – Magnum 230/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-232-4)
from
$416.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
MSD Ignition – Distributor; Chrysler 318-360; Ready-to-Run (Part No.8388)
from
$635.99
MSD’s Ready-to-Run Pro-Billet distributors for Chrysler engines are the perfect upgrade from breaker points or weak electronic ignitions. These distributors feature a maintenance-free magnetic pick-up that accurately triggers the built-in powerful ignition module. This module produces a high-output spark which improves combustion in the cylinder, resulting in quick starts, a smooth idle and great performance. Just beneath the race rotor is a mechanical advance assembly so a timing curve can easily be tailored to match your application. The QPQ coated shaft is guided by a sealed ball bearing assembly for stability and endurance while a vacuum advance canister helps increase economy on those long cruises. The Ready-to-Run distributors are also a breeze to install. Simply drop it in the engine and connect three wires and you’re Ready-to-Run to your favorite cruise! The front engine mount models are designed in a special small diameter housing to clear aftermarket heads and valve covers.
Product Features:
See More
Product Features:
- Simple and clean three wire installation
- Mech. advance assem. can be locked out for crank trigger systems
- Supplied w/HEI Style Distributor Cap And Rotor
- Accepts Cap-A-Dapts
- CARB E.O. Approved
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft; guided by sealed ball bearings
B & M – Automatic Shifter, Magnum Grip Street Bandit (Part No.81050)
from
$799.99
The B&M Racing Street Bandit Pistol-grip shifter is perfect for the person looking for a gated performance shifter in a compact good looking package which can be mounted in door cars. The Street Bandit features replaceable 2, 3 or 4 speed forward pattern gate plates along with a 3 speed reverse pattern gate plate, all guaranteeing you won’t miss a shift. Other features include a back-up light switch, neutral safety switch, brushed aluminum cover, CNC aluminum Magnum Grip shift handle, a 5ft Super Duty cable, all brackets, levers and instructions for an easy installation. Be sure to check out all our optional side grip plates including real Rosewood engraved with the B&M logo part #81086, CNC billet aluminum side plates with 12 volt micro-switch #81060, 81063, 81078 and coming soon optional colored side plates to customize the look of the shifter. Also see optional floor mounting bracket #80884
Product Features:
See More
Product Features:
- Ideal For High-Tech Pro-Street
- Ideal For High-Tech Street Rods
- Narrow Styled Aluminum Housing
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Billet Aluminum Knob
- Can Be Used w/Reverse Pattern Valve Body
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5938)
from
$57.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1008)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mallory – Distributor Condenser (Part No.401)
from
$19.29
Distributor Condenser
Mr. Gasket – Dust Cap (Part No.2485)
from
$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Earls Performance Product – Brake Bleeder Screws (Part No.280035ERL)
from
$40.49
Brake Bleeder Screws
Mr. Gasket – Precision Timing Tape (Part No.1593)
from
$22.29
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 7 1¿4″ diameter
- 7 1┐4″ diameter
- 383 thru 440 cu. in.
- Increased Performance
- Set Valve Lash At Proper Time
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Richmond Gear – RngPnn (Part No.69-0046-1)
from
$342.99
RngPnn
Motive Gear – Performance Differential Ring and Pinion (Part No.C887373M)
from
$257.99Product Features:
- CHRY 10BLT 8.75 EARLY R/P 3.73 MGP 29SP USE MG7260-C875/MG1350-C87529
Motive Gear – Performance Differential Ring and Pinion (Part No.C887355M)
from
$257.99Product Features:
- CHRY 10BLT 8.75 EARLY R/P 3.55 MGP 29SP USE MG7260-C875/MG1350-C87529
Richmond Gear – Differential Ring And Pinion (Part No.69-0048-1)
from
$342.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Upgrade your 1963 Dodge D100 Series with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1963 Dodge D100 Series, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your D100 Series functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Performance and Racing Products for the 1963 Dodge D100 Series, designed to meet your needs without breaking the bank.
From
Performance Valve Cover
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1963 Dodge D100 Series at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $14.29 to $643.99, with
an average price of $197.69.
Our 36 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 1963 Dodge D100 Series without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1963 Dodge D100 Series, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory, MSD Ignition, B & M, and more.
Mallory Performance and Racing Products
start at just $95.99 and boast an impressive 4.9 stars average rating from customers.
MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $55.99, and at an average 4.2 stars rating.
With 118 customer reviews and counting, our 1963 Dodge D100 Series Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1963 Dodge D100 Series is always ready to roll. We’re committed to providing you with everything you need to keep your D100 Series in top shape, all in one place.
Start shopping confidently below for your 1963 Dodge D100 Series!
Best-Selling Performance Valve Covers for 1963 Dodge D100 Series
Enhance the driving experience in your Dodge with 1 quality Performance Valve Cover components, starting at $96.99.
Mr. Gasket – Valve Cover (Part No.9806)
from
$96.99
Chrome plated stamped steel valve covers have a flat smooth top, with internal baffles. Tall-style cover provides extra valve train clearance. Sold as a pair. Will not fit Magnum style heads.
Product Features:
See More
Product Features:
- Fits Chrysler small block (pre-Magnum style heads)
- Chrome plated steel
- Tall-style covers provide extra clearance
- Sold as a pair
- Cadmium Plated To Resist Corrosion
- Easy Installation
Most Popular 1963 Dodge D100 Series Performance Distributors
Customize your Dodge with 2 Performance Distributors products
like Performance Distributors and
Performance Distributor Components, all
priced under $538.99.
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)
from
$15.79
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.
Product Features:
See More
Product Features:
- Rolled Edges For Strength
- Ideal For Magnetos
- Ideal For Ignition Distributor
MSD Ignition – Distributor; Chrysler 383; 400 Pro-Billet (Part No.8545)
from
$538.99
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
Product Features:
See More
Product Features:
- Smaller diameter CNC machined billet aluminum housing
- Billet aluminum base clears aftermarket heads and valve covers
- Must Be Used w/An MSD Ignition Control
- Supplied w/small dia. cap w/HEI style terminals; race and rotor
- Will accept PN[8441] Cap-A-Dapt
- Mechanical advance assembly can be locked out for crank trigger systems
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
Top Picks for 1963 Dodge D100 Series Performance Ignition Products
Upgrade Dodge D100 Series with top-quality Performance Ignition Products parts, including 7 OEM and aftermarket selections for your 1963 model.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
MSD Ignition – Wire Set; Black Super Conductor; Chrysler 383-440 HEI for MSD Distributor (Part No.32733)
from
$194.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Condenser (Part No.401)
from
$19.29
Distributor Condenser
In-Demand Performance Exhaust Products for 1963 Dodge D100 Series
Select from 1 premium Performance Exhaust Products parts for your 1963 Dodge D100 Series.
Flowtech – Header Gasket Set (Part No.99361FLT)
from
$20.99
Header Gasket Set
Most Sold 1963 Dodge D100 Series Performance Engines
Explore our best-selling Dodge parts for the 1963 D100 Series among 15 OEM and aftermarket options starting from $14.99.
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$32.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
Mr. Gasket – Head Gasket (Part No.1121G)
from
$45.49
Graphite & steel construction, proprietary polymer coated. 4.140 inch Gasket Bore, .028 inch Compressed Thickness.
Product Features:
See More
Product Features:
- Steel Shimmed For Perfect Sealing
- Increases Engine Compression
- High Temp Silicone Coated To Prevent Leaks
- Stress Formed Embossments
Mr. Gasket – Precision Timing Tape (Part No.1593)
from
$22.29
Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.
Product Features:
See More
Product Features:
- 7 1¿4″ diameter
- 7 1┐4″ diameter
- 383 thru 440 cu. in.
- Increased Performance
- Set Valve Lash At Proper Time
Edelbrock – RPM Air-Gap Small Block Chrysler Black Intake Manifold (Part No.75763)
from
$643.99
Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competit
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.9 in. Front Height, 5.35 in. Center Height, 5.8 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Competition Cams – High Energy 215/215 Solid Flat Cam and Lifter Kit Chrysler 170-225 6 Cylinder (Part No.CL64-240-4)
from
$635.99
High Energy 215/215 Solid Flat Cam and Lifter Kit Chrysler 170-225 6 Cylinder
Edelbrock – RPM Air-Gap Small Block Chrysler Intake Manifold (Part No.7576)
from
$497.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. Accepts early-style waterneck only. Non-EGR. Mopar 340-360. 4 bbl carb. For street and high pe
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Dual-Plane High-Rise Intake
- Accepts Early-Style Waterneck
Competition Cams – Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7957-16)
from
$281.99
Hi-Tech 7.500" Long, .080" Wall, 5/16" Diameter Pushrod Set
Competition Cams – Valve Springs, 1.406" Chysler (Part No.970-12)
from
$79.99
Valve Springs, 1.406" Chysler
Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)
from
$49.99
With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.
Product Features:
See More
Product Features:
- Advance the cam for increased torque and horsepower
- Tune your powerband for more end torque or increase top end horsepower
- Includes (4) offset bushings and (1) 0 degree bushing
- Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
- Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
- Increase Top-End Horsepower
Competition Cams – 1 Spring (Part No.947-1)
from
$46.99
1 Spring
Competition Cams – Performance Series Solid Lifter for Chrysler 273-360, 383-440/426 HEMI. (Part No.2921-1)
from
$24.99
Performance Series Solid Lifter for Chrysler 273-360, 383-440/426 HEMI.
Competition Cams – High Energy 9.954" Long, 5/16" Diameter Pushrod (Part No.7864-1)
from
$14.99
High Energy 9.954" Long, 5/16" Diameter Pushrod
Top-Rated Performance and Racing Products Brands For Your 1963 Dodge D100 Series
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1963 Dodge D100 Series. Below you’ll find some of our best rated Performance and Racing Products from Mallory, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 1963 D100 Series start at just $55.99 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1963 Dodge D100 Series Performance and Racing Products
When it comes to maintaining or upgrading your 1963 Dodge D100 Series, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1963 Dodge D100 Series. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $95.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$95.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular MSD Ignition 1963 Dodge D100 Series Performance and Racing Products
MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1963 Dodge D100 Series owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 1963 D100 Series, Advance Auto Parts carries a full inventory of 1 MSD Ignition Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range up to $55.99, plus, with more than 20 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 1963 Dodge D100 Series Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1963 Dodge D100 Series?
Out of 36 Performance and Racing Products that fit 1963 Dodge D100 Series, the following parts are the top sellers:
- Intake Manifold Bolts (6120970) – $18.29
- High Performance Thermostat (22903641) – $32.49
- High Performance Thermostat (22903643) – $31.99
What’s the price range for 1963 Dodge D100 Series Performance and Racing Products?
Performance and Racing Product prices for the 1963 Dodge D100 Series start at $14.29 and go up to $643.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1963 Dodge D100 Series?
The average price for Performance and Racing Products for the 1963 Dodge D100 Series is $197.69. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Dodge D100 Series model years?
What are the cheapest Performance and Racing Products for my 1963 Dodge D100 Series?
The cheapest 1963 Dodge D100 Series Performance and Racing Products we carry in stock are:
- Dust Cap (22901302) – $14.29
- High Energy 9.954" Long, 5/16" Diameter Pushrod (50289332) – $14.99
- Chrome Distributor Hold-Down Clamp (22901041) – $15.79
- Intake Manifold Bolts (6120970) – $18.29
- Distributor Condenser (17350019) – $19.29
What are the top-rated Performance and Racing Products that fit the 1963 Dodge D100 Series?
Out of 118 reviews by customers, our 1963 Dodge D100 Series Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1963 Dodge D100 Series and their top-rated products:
- Performance Shifters
- Automatic Shifter, StarShifter (6274609) – $349.99
- Automatic Shifter, Z-Gate (6900216) – $306.99
What types of Performance and Racing Products do you sell for my 1963 Dodge D100 Series?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1963 Dodge D100 Series:
Can I get help with 1963 Dodge D100 Series Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.
What is your return policy for Dodge D100 Series Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Dodge D100 Series Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
