1963 Chevrolet Chevy II Differentials

Essential 1963 Chevrolet Chevy II Differentials

Yukon Gear – 18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16110)

18 Plate Steel Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$483.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 18 piece kit
  • Steel clutches
See More

Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)

Pinion Install Kit For GM 55P And 55T Differential

from

$276.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits 1955-1964 GM truck and passenger car
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck (Part No.32236)

Chrome Moly Cross Pin Shaft For Mini-Spool For GM 12 Bolt Car And Truck

from

$61.99
Chrome Moly cross pin shaft for Mini-Spool for GM 12P and 12T HD.

Product Features:
  • Hardened cross pin shaft
  • Fits GM 12 bolt passenger car and truck
See More

Richmond Gear – RngPnn (Part No.49-0113-1)

RngPnn

from

$344.99
RngPnn

Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio (Part No.26012)

Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio

from

$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 12 bolt passenger car with 33 spline axles
  • 3.08-3.90 ratios only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Standard Open Pinion Gear Thrust Washer For GM 12P And 12T (Part No.33381)

Standard Open Pinion Gear Thrust Washer For GM 12P And 12T

from

$11.99
Standard Open pinion gear thrust washer for GM 12P and 12T.

Product Features:
  • Pinion gear thust washer for GM 12 bolt passenger car and truck
  • Fits standard open differentials only
See More

Pro-King – Differential Ring Gear Bolt (Part No.742E935)

Differential Ring Gear Bolt

from

$1.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Minor Install Kit For GM Chevy 55P And 55T Differential (Part No.12047)

Minor Install Kit For GM Chevy 55P And 55T Differential

from

$73.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1955-1964 GM truck and passenger car
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1104)

Differential Pinion Shim Kit

from

$12.99


Product Features:
  • KIT SHIM
See More

Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
  • Interlocking design makes installation much easier
See More

Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

from

$35.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAG US – SHAFT SEAL (Part No.SS2776)

SHAFT SEAL

from

$19.79
SHAFT SEAL

Yukon Gear – Chevy ’55-’64 Car And Truck Dropout Gasket (Part No.23017)

Chevy '55-'64 Car And Truck Dropout Gasket

from

$13.99
55P Chevy Passenger Drop Out gasket.

Product Features:
  • Cover gasket
  • Fits 1955-1964 GM passenger car
See More

Pro-King – Crush Sleeve (Part No.741A034)

Crush Sleeve

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Felpro – Differential Carrier Gasket (Part No.RDS 11724)

Differential Carrier Gasket

from

$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

from

$109.99
12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
See More

Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)

Side Gear Thrust Washer For GM 8.2" & 55P

from

$10.99
Product Features:
  • Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
  • Fits standard open differentials only
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Motive Gear – Differential Bearing Kit – Koyo (Part No.R12CR)

Differential Bearing Kit - Koyo

from

$99.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KIT BRG&SL GM 12 BOLT CAR
See More

USA Standard Gear – Spartan Locker For GM 12 Bolt Car & Truck With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17032)

Spartan Locker For GM 12 Bolt Car & Truck With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$672.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits GM 12 bolt car and truck with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16039)

Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles

from

$425.99
Yukon positraction internals (0.806″ diameter) for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit GM 12 bolt passenger car and truck Dura Grip positraction with 30 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up (Part No.26013)

Dura Grip Positraction For GM 12 Bolt Car With 30 Spline Axles, 4.10 & Up

from

$839.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 12 bolt passenger car with 30 spline axles
  • 4.10 and up ratio only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
  • 30 spline
See More

Yukon Gear – Differential (Part No.26014)

Differential

from

$889.99
Differential

1963 Chevrolet Chevy II Differentials

Maybe you’re in the middle of a full rebuild of that 1963 Chevrolet Chevy II. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 61 different Differentials in our inventory ranging from $4.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1963 Chevrolet Chevy II running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1963 Chevrolet Chevy II. Valvoline, Driveworks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1963 Chevrolet Chevy II, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 216 reviews in this category, some of the top rated parts include Differential Bearing Kit – Timken with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1963 Chevrolet Chevy II rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1963 Chevrolet Chevy II Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1963 Chevrolet Chevy II demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Chevy II the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1963 Chevrolet Chevy II, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $5.29
(2)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

FAQs for 1963 Chevrolet Chevy II Differentials

What are the most purchased Differentials for the 1963 Chevrolet Chevy II?

Out of 61 Differentials for the 1963 Chevrolet Chevy II, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $9.49
This product is not rated
Bearings
Rear Differential Pinion Bearings

What are the top-rated 1963 Chevrolet Chevy II Differentials?

Top-rated Differentials for your 1963 Chevrolet Chevy II based on customer reviews/ratings are:
Differential Bearing Kit - Timken
from $160.99
(1)
Differential Bearing Kit – Timken
“great quality, price and delivery. couldn’t ask for more.”