1962 Pontiac Tempest Exhaust Parts
Find Your Specific 1962 Pontiac Tempest Exhaust Parts
Below you will find various in-demand Pontiac Exhaust Parts, components and accessories for your 1962 Tempest. Advance Auto Parts has popular Tempest parts like Exhaust Gaskets Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Tempest model years including
1961,
1963,
1964,
1965,
1966,
1967,
1968,
1969,
1970 and more. Select a category of 1962 Pontiac Tempest Exhaust Parts below and start saving instantly.
Popular 1962 Pontiac Tempest Exhaust Parts Categories
Essential Exhaust Parts for 1962 Pontiac Tempests
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Stainless Steel – Natural Cast (Part No.8503HKR)
from
$674.99
Product Features:
See More
- 2.5-inch outlet diameter offers improved flow for maximum performance from a cast exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Plain as-cast finish for a factory appearance. Also available in polished.
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Stainless Steel construction to provide unmatched durability and corrosion resistance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Flowtech – Flowtech LS Swap Exhaust Manifolds – Natural Cast Finish (Part No.11730FLT)
from
$292.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an original quality seal and fitment
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8527HKR)
from
$339.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for raised D-port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker BlackHeart – Hooker BlackHeart LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.8502-3HKR)
from
$742.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability, quiet operation, and leak-free sealing is desired
- Black ceramic coating for reduced engine compartment temps and improved corrosion resistance
- Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- 2.5 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
Flowtech – Flowtech LS Swap Exhaust Manifolds – Black Ceramic Finish (Part No.31730-3FLT)
from
$404.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-1HKR)
from
$562.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – ExhstHdr (Part No.2289-1HKR)
from
$1450.99
ExhstHdr
Flowtech – Flowtech LS Swap Exhaust Manifolds – Silver Ceramic Finish (Part No.31730-1FLT)
from
$497.99
Product Features:
See More
- Intended for GM LS engine swap applications where durability and leak-free sealing is desired at a budget-oriented price
- Nickel plated steel mating flanges included (mating flange fasteners are not included)
- 2.25 inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
- 2 bolt exit flange configuration matches the E-rod exhaust manifolds for a factory like fitment. This allows the use of factory gaskets and fasteners if desired, for an OE quality seal and fitment to emissions devices
- Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
- Tight tuck design provides universal fit for most popular chassis and a clean traditional muscle car appearance
- Available in plain as-cast finish or with black or silver ceramic coatings for reduced engine compartment temps and improved corrosion resistance
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-3HKR)
from
$449.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$49.49
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Felpro – Intake and Exhaust Manifolds Combination Gasket (Part No.MS 9786)
from
$18.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 9499 SH)
from
$16.79
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Remflex – Set Of 2, 1-1/8" X 1.75"D-Shaped Center Port Size/ 1-3/8" X 13/16" Oval End Port (Part No.12-001)
from
$45.99
Remflex unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees – day after day, week after week, year after year. Now, they are bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Product Features:
See More
Product Features:
- 100 Percent Flexible Graphite Construction
- Designed To Withstand Clamping Force And Incredible Heat
- Eliminate Exhaust Leaks
- No Re-Torquing Necessary, Remflex Exhaust Gaskets Rebound 30 Percent, Creating An Optimum Seal That Eliminates The Need To Re-Torque
Flowtech – Exhaust Manifold/Header Hardware (Part No.99150FLT)
from
$95.99
Exhaust Manifold/Header Hardware
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90013)
from
$10.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Taylor Gaskets – Seal-4-Good Header Flange Gasket (Part No.66041)
from
$48.99
Seal-4-Good Header Flange Gasket
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5920)
from
$54.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Upgrade your 1962 Pontiac Tempest with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1962 Pontiac Tempest, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Exhaust Parts are key to keeping your Tempest functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Exhaust Parts for the 1962 Pontiac Tempest, designed to meet your needs without breaking the bank.
From
Exhaust Gasket
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1962 Pontiac Tempest at great prices.
Our Exhaust Parts inventory for this model
ranges from just $10.49 to $562.99, with
an average price of $357.25.
Our 7 Exhaust Parts in stock come from 3 trusted brands, so you’re sure to find the right part for your 1962 Pontiac Tempest without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1962 Pontiac Tempest is always ready to roll. We’re committed to providing you with everything you need to keep your Tempest in top shape, all in one place.
Start shopping confidently below for your 1962 Pontiac Tempest!
Best-Selling Exhaust Gaskets for 1962 Pontiac Tempests
Enhance the driving experience in your Pontiac with 1 quality Exhaust Gasket components, starting at $10.49.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 90013)
from
$10.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Most Popular 1962 Pontiac Tempest Exhaust Manifold and Headers
Customize your Pontiac with 6 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold and Header Hardware, all
priced under $562.99.
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$49.49
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-1HKR)
from
$562.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525-3HKR)
from
$449.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8527-3HKR)
from
$449.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for raised D-port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8525HKR)
from
$371.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for rectangular port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
Hooker Headers – Hooker Small Block Chevrolet Exhaust Manifolds (Part No.8527HKR)
from
$339.99
Product Features:
See More
- A smoother, cleaner appearance compared to original exhaust manifolds, while maintaining a factory style look and feel
- Made from high silicon-molybdenum ductile iron for high temperature strength plus resistance to oxidation and cracking
- Designed with a larger 1 5/8″ cross-sectional area and 2 ╜” outlets for better air flow and increased performance
- Designed for raised D-port heads
- Accommodates standard straight and Vortec straight plug head designs for better application coverage
- Includes weld-on flanges for easier downpipe pipe installation (custom downpipe required)
- Available in natural cast iron or ceramic coated finishes (silver, black and titanium)
- Includes mounting hardware and gaskets for inlet and outlet flanges
FAQs for 1962 Pontiac Tempest Exhaust Parts
Which Exhaust Parts are best-sellers for 1962 Pontiac Tempests?
Out of 7 Exhaust Parts that fit 1962 Pontiac Tempests, the following parts are the top sellers:
- Exhsthdrbolt (11776745) – $49.49
- Hooker Small Block Chevrolet Exhaust Manifolds (50310190) – $371.99
- Hooker Small Block Chevrolet Exhaust Manifolds (50310031) – $449.99
What’s the price range for 1962 Pontiac Tempest Exhaust Parts?
Exhaust Part prices for the 1962 Pontiac Tempest start at $10.49 and go up to $562.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1962 Pontiac Tempest?
The average price for Exhaust Parts for the 1962 Pontiac Tempest is $357.25. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Pontiac Tempest model years?
What are the cheapest Exhaust Parts for my 1962 Pontiac Tempest?
The cheapest 1962 Pontiac Tempest Exhaust Parts we carry in stock are:
- Exhaust Manifold Gasket Set (19780748) – $10.49
- Exhsthdrbolt (11776745) – $49.49
- Hooker Small Block Chevrolet Exhaust Manifolds (50310048) – $339.99
- Hooker Small Block Chevrolet Exhaust Manifolds (50310190) – $371.99
- Hooker Small Block Chevrolet Exhaust Manifolds (50310202) – $449.99
What types of Exhaust Parts do you sell for my 1962 Pontiac Tempest?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1962 Pontiac Tempest:
Can I get help with 1962 Pontiac Tempest Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Exhaust Parts and more.
What is your return policy for Pontiac Tempest Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Pontiac Tempest Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
