1962 Dodge W300 Series Drivetrains
More 1962 Dodge W300 Series Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1962 Dodge W300 Series, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1962 Dodge W300 Series Drivetrains
Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)
from
$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41023)
from
$203.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – Replacement Outer Oil Slinger For Dana 60, 70, 70U & 70HD (Part No.33019)
Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)
Driveworks – Oil Seal (Part No.S-482163N)
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1350 U/Joint Size (Part No.41026)
from
$179.99
Yukon replacement yoke for Dana 60 and 70 with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- Strap style
Motive Gear – Differential Pinion Seal (Part No.5126B)
from
$9.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Powertrax – Lock Right Locker (Part No.1240-LR)
from
$456.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Motive Gear – Differential Carrier Shim Kit (Part No.1106)
Yukon Gear – Bearing Race Driver (Part No.56011)
from
$215.99
Bearing race driver for Dana 60 front, Dana 70U rear, Chrysler 8.75″ with 42 housing, and ’88 and older GM 14T. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM803110 race
- All steel construction
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Yukon Gear – Replacement Standard Open Carrier Case For Dana 70, 4.10 & Down (Part No.20045)
from
$352.99
Yukon replacement standard open carrier case for Dana 70, 4.10 & down (incl ABS).
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 70
- 4.41 and down ratio only
- Does not include spider gears
Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)
from
$79.99
Seal housing for Dana 60, Zip locker, with o-rings.
Product Features:
See More
Product Features:
- Seal housing for Dana Spicer 60
- Includes o-rings
National – Shaft Repair Sleeve (Part No.99125)
from
$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Differential (Part No.26044)
from
$1119.99
Differential
Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)
from
$7.99
Dana 70 & Dana 80 pinion gear Thrust washer.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 70 and 80
Yukon Gear – 1350 & 1410 U/Joint U-Bolts, 3/8" X 1-11/16", Kit (Part No.41190)
from
$16.99
1350 & 1410 U/joint U-bolts, 3/8″ X 1-11/16″, kit.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits 1350 and 1410 u-joint size
- Includes two u-bolts and four nuts
Richmond Gear – RngPnn (Part No.69-0052-1)
from
$360.99
RngPnn
Yukon Gear – Zip Locker Bulkhead Fitting Kit (Part No.34000)
from
$36.99
Product Features:
See More
- Bulkhead fitting kit
- Includes bulkhead fitting, outer fitting and o-ring
Felpro – Differential Cover Gasket (Part No.RDS 6014)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)
from
$17.99
U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
- 1350 and 1410 u-joint size
- Includes two straps and four bolts
Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)
from
$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 1.830″ I.D.
- 10 outer tabs
Yukon Gear – Replacement Ring Gear Bolt For Dana 60, 70, 70U & 70HD, 1/2" X 18 (Part No.33037)
from
$4.99
Replacement ring gear bolt for Dana 60, 70, 70U & 70HD, 1/2″ x 18.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 60, 70, 70U and 70HD
- 1/2″ x 18 thread
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – Replacement Crush Sleeve For Dana 60 (Part No.33089)
from
$8.99
Replacement crush sleeve for Dana 60, APROX 0.660″ long.
Product Features:
See More
Product Features:
- Crush sleeve for Dana Spicer 60
- 0.660″ tall
Yukon Gear – Minor Install Kit For Dana 60 And 61 Front Differential (Part No.12077)
from
$169.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Included are a pinion seal, axle seals, crush sleeve , complete shim kit, marking compound and brush.
Popular 1962 Dodge W300 Series Drivetrains Categories
1962 Dodge W300 Series Drivetrains
You count on your 1962 Dodge W300 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 267 Drivetrains ranging in price from $3.49 to $1,487.99, you’re sure to find everything you need for your 1962 Dodge W300 Series.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Yukon Gear, Anchor, and National. 1962 Dodge W300 Series Drivetrains start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 104 extensive product reviews on 1962 Dodge W300 Series Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 3.0 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1962 Dodge W300 Series below to get started!
Top-Rated Drivetrains Brands For Your 1962 Dodge W300 Series
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Dodge W300 Series running right for years to come. In our inventory you’ll find brands like Yukon Gear, Anchor, National, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1962 Dodge W300 Series back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Anchor Drivetrains
If Anchor are what you’re looking for, our inventory holds plenty. We stock Anchor brand Drivetrains for your 1962 Dodge W300 Series, and some of our most reviewed Anchor parts include:
FAQs for 1962 Dodge W300 Series Drivetrains
What are the most purchased Drivetrains for the 1962 Dodge W300 Series?
Out of 267 Drivetrains for the 1962 Dodge W300 Series, the most popular in our inventory are:
What are the top-rated 1962 Dodge W300 Series Drivetrains?
Top-rated Drivetrains for your 1962 Dodge W300 Series based on customer reviews/ratings are:
