1962 Chrysler Imperial Differentials

Name: Bearing Race Driver
Brand: Yukon Gear
SKU: 56017
Price: 215.99 USD

Find your specific 1962 Chrysler Imperial original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1962 Chrysler Imperial Differentials

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM89410 race
All steel construction

from

$23.49

Product Features:

Brand may vary by location

from

$57.99

Cross pin shaft for 8.25″ Chrysler.

Product Features:

Cross pin shaft for Chrysler 8.25″
Fits standard open differentials only

from

$5.99

Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75″ Chrysler STD) Dana 70 2PC.

Product Features:

Pinion gear thrust washer for Dana Spicer 60
Fits standard open and Trac Loc applications

from

$344.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Chrysler 8.75″ ’42’ case housing with 25520 carrier races
Included are carrier bearings and races, pinion bearings and races, pinion seal, marking compound and brush.

from

$279.99

Yukon yoke for Chrysler 9.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 9.25″ rear
29 spline
7290 u-joint size
2.625″ snap ring span
1.125″ cap diameter
Inside snap ring design
Strap style

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$15.79

Product Features:

PINION SHIM 8 3/4″ EARLY

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$1015.00

USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

Product Features:

Gear Power Lok Posi LSD
Fits Chrysler 8.75″
Smooth design
Positraction

from

$289.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 8.75″ ’89’ case
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$349.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Chrysler 8.75″ ’41’ case housing with 25520 carrier races
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$26.99

Product Features:

Pinion nut
Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion

from

$31.99

Product Features:

Flat drive plate
Fits Dana Spicer 44 Powr Lok

from

$67.99

Powr Lok button kit
Fits Dana Spicer 30, 44 and Chrysler 8.75″

from

$17.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$37.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$9.99

Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:

Pinion nut washer
Fits Chrysler 8.75″ with 10 spline pinion

from

$16.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$264.99

Yukon Performance 2-1/16″ deck steel spool for 8.75″ Chrysler with 30 spline axles. Spool uses 2.050″ journal bearings (LM104949/12). Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler 8.75″ with 30 spline axles
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$16.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$13.99

Product Features:

CRUSH SLEEVE CHRYS 8 3/4

from

$474.99

Product Features:

Dropout housing
Fits Chrylser 8.75″
’89’ case design
Nodular iron for added strength

from

$319.99

USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:

Fits Chrysler 8.25″
8.25″ ring gear diameter
27 spline pinion
10 ring gear bolts
3.90 ratio

from

$641.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon has an updated, proprietary, design that provides longer life and higher durability than the competition. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. We reccomend an OEM gear for van applications. This gear set is for ’09 and older applications only.

Product Features:

Fits 2010 and down Chrysler 9.25″ rear
9.25″ ring gear diameter
29 spline pinion
12 ring gear bolts
4.11 ratio

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Popular 1962 Chrysler Imperial Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Bearings

Differential Pinion Pilot Bearings

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Rebuild Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Spools

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Automatic Transmission Differential Carrier Gaskets

Differential Pinion Gear Thrust Washers

Differential Pinion Gear Washers

Differential Lock Thrust Blocks

Maybe you’re in the middle of a full rebuild of that 1962 Chrysler Imperial. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 117 different Differentials in our inventory ranging from $4.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1962 Chrysler Imperial running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1962 Chrysler Imperial. Yukon Gear, National, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1962 Chrysler Imperial, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 7 reviews in this category, some of the top rated parts include Pinion Nut with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1962 Chrysler Imperial rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1962 Chrysler Imperial Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1962 Chrysler Imperial demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Imperial the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1962 Chrysler Imperial, our most popular Felpro Differentials include:

from $6.49

(1)

Differential Carrier Gasket

Automatic Transmission Differential Carrier Gaskets

Top 1962 Chrysler Imperial Differentials from National

National products are another trusted brand when it comes to Differentials for your 1962 Chrysler Imperial. Popular National parts include:

from $38.49

(2)

Bearings

Front Differential Pinion Bearings

from $20.99

(2)

Bearings

Front Differential Pinion Bearings

from $18.99

(1)

Multi Purpose Seal

Differential Pinion Seals

FAQs for 1962 Chrysler Imperial Differentials

What are the most purchased Differentials for the 1962 Chrysler Imperial?

Out of 117 Differentials for the 1962 Chrysler Imperial, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $22.79

This product is not rated

Taper Bearing Cone

Differential Bearings

from $8.99

This product is not rated

Bearings

Differential Bearings

What are the top-rated 1962 Chrysler Imperial Differentials?

Top-rated Differentials for your 1962 Chrysler Imperial based on customer reviews/ratings are:

from $8.49

(1)

Pinion Nut

“Said it fits 62 Corvette on website, this nut is 7/8-14 thread and the one that fits is 7/8-16 thread. Wrong info on site set me back a week getting t”

1962 Chrysler Imperial Differentials

More 1962 Chrysler Imperial Differentials

Essential 1962 Chrysler Imperial Differentials

Yukon Gear – Bearing Race Driver (Part No.56017)

Driveworks – Tapered Roller Bearing (Part No.S-HM-803149)

Yukon Gear – Cross Pin Shaft For 8.25" Chrysler (Part No.33308)

Yukon Gear – Dana 60 Pinion Gear Thrust Washer, Standard Open & Tracloc (Also 8.75" Chrysler Std) Dana 70 2Pc (Part No.33287)

Yukon Gear – Bearing Install Kit For Chrysler 8.75" Four Pinion (#42) Differential (Part No.11009)

Yukon Gear – Yoke For Chrysler 9.25" With A 7290 U/Joint Size (Part No.41002)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Motive Gear – Differential Pinion Shim Kit (Part No.1108)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Motive Gear – Ring Gear Bolt (Part No.14066913)

USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#89) Differential (Part No.13007)

USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #41 Housing with 25520/90 Differential bearings (Part No.37092)

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

Yukon Gear – Powr Lok Flat Drive Plate For Dana 44 (Part No.16172)

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

National – Multi Purpose Seal (Part No.8516N)

National – Shaft Repair Sleeve (Part No.99157)

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

National – Bearings (Part No.JLM704610)

Yukon Gear – Steel Spool For Chrysler 8.75" With 30 Spline Axles (Part No.32040)

Felpro – DIFFERENTIAL GASKET (Part No.RDS 55481)

Motive Gear – Differential Crush Sleeve (Part No.3102)

USA Standard Gear – 8.75" Chrysler 89 Drop Out Case, Up To 500 Hp, Nodular Iron (Part No.59001)

USA Standard Gear – Ring & Pinion Gear Set For Chrysler 8.25" In A 3.90 Ratio (Part No.36010)

Yukon Gear – High Performance Ring & Pinion Gear Set For ’09 & Down Chrysler 9.25" In A 4.11 Ratio (Part No.24015)

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Popular 1962 Chrysler Imperial Differentials Categories