1962 Chevrolet Corvette Drive Shafts and Axles

Essential 1962 Chevrolet Corvette Drive Shafts and Axles

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-1310X)

Universal Joint

from

$35.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Spicer – Universal Joint (Part No.5-1350X)

Universal Joint

from

$44.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Replacement Side Yoke Seal For 80-87 Dana 44-HD Ica Vett (Part No.30275)

Replacement Side Yoke Seal For 80-87 Dana 44-HD Ica Vett

from

$22.99
Replacement side yoke seal for 80-87 Dana 44-HD ICA VETT (2.26″ OD).Yukon Mighty seal.

Product Features:
  • Stub axle seal
  • Fits 1980-1987 Corvette
  • 2.26″ O.D.
See More

Yukon Gear – Replacement Outyer Seal For Dana 30 Bronco And CI Vette Side Seal (Part No.30087)

Replacement Outyer Seal For Dana 30 Bronco And CI Vette Side Seal

from

$34.99
Replacement outer seal for Dana 30 Bronco CI Vette side seal.Yukon Mighty seal.

Product Features:
  • Outer axle seal
  • Fits Dana Spicer 30 in Ford Bronco
See More

National – Axle Shaft Seal (Part No.711065)

Axle Shaft Seal

from

$37.49
Axle Shaft Seal

SKF – Axle Shaft Seal (Part No.K4021473976SKF)

Axle Shaft Seal

from

$19.03
SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:
  • Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
  • The flanged design allows for easier and proper installation and helps avoid cocking.
  • The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
  • Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
See More

Driveworks – Oil Seal (Part No.S-3543)

Oil Seal

from

$4.99
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – 58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr (Part No.30127)

58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr

from

$74.99
58-64 Chevy Passenger axle seal, USE w/ BCARW607NR.Yukon Mighty seal.

Product Features:
  • Axle seal
  • Fits 1958-1964 GM passenger car
  • For use with RW607NR bearing
See More

Yukon Gear – C5 Vette Axle Seal (Part No.30284)

C5 Vette Axle Seal

from

$86.99
C5 VETTE axle seal.Yukon Mighty seal.

Product Features:
  • Axle seal
  • Fits C5 & C6 Corvette
See More

Yukon Gear – Ci Vette Side Yoke Stub Axle Seal 63-79 (Part No.30282)

Ci Vette Side Yoke Stub Axle Seal 63-79

from

$17.99
CI VETTE side yoke stub axle seal 63-79.Yukon Mighty seal.

Product Features:
  • Side yoke seal
  • Fits 1963-1979 Corvette
See More

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.307-L)

Bearings

from

$37.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1962 Chevrolet Corvette Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1962 Chevrolet Corvette. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 5 different Drive Shafts and Axles in our inventory ranging from $35.99 to $883.99. That means you can find the exact parts or products you need to keep that 1962 Chevrolet Corvette running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1962 Chevrolet Corvette. Spicer, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1962 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1962 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1962 Chevrolet Corvette Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1962 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1962 Chevrolet Corvette, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints

FAQs for 1962 Chevrolet Corvette Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1962 Chevrolet Corvette?

Out of 5 Drive Shafts and Axles for the 1962 Chevrolet Corvette, the most popular in our inventory are:
Bearings
from $37.99
This product is not rated
Bearings
Drive Shaft Bearings
58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr
from $74.99
This product is not rated
58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr
Axle Shaft Seals
The Carrier Bearing Puller
from $883.99
This product is not rated
The Carrier Bearing Puller
Bearing Pullers