1962 Buick Invicta Suspension Parts
Find Your Specific 1962 Buick Invicta Suspension Parts
Below you will find various in-demand Buick Suspension Parts, components and accessories for your 1962 Invicta. Advance Auto Parts has popular Invicta parts like Coil and Leaf Springs, Shocks and Struts, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other Invicta model years including
1959,
1960,
1961,
1963 and more. Select a category of 1962 Buick Invicta Suspension Parts below and start saving instantly.
Popular 1962 Buick Invicta Suspension Parts Categories
Essential Suspension Parts for 1962 Buick Invictas
KAI – Control Arm Bumper (Part No.GMK4041972582)
from
$9.99
New Goodmark Front Upper Control Arm Bumper, Use 2
Product Features:
See More
Product Features:
- Use 2
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Rare Parts – Control Arm Bumper (Part No.RP18510)
from
$179.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Reduces vibration
- Torsional rubber bushings
- UV resistant
- No Squeak
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
MOOG – Coil Spring Set (Part No.5030)
from
$141.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5759)
from
$30.49
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Metro Mould – Shock Absorber Bushing (Part No.BN 11)
from
$12.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Shock Absorber Grommet. 1 In. bottom O.D. 3/4 In. high, with 5/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Upgrade your 1962 Buick Invicta with Top-Quality Suspension Parts
When it comes to maintaining or upgrading your 1962 Buick Invicta, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Buick or enhancing its overall performance, Suspension Parts are key to keeping your Invicta functioning at its best. At Advance Auto Parts, we offer a wide selection of 8 Suspension Parts for the 1962 Buick Invicta, designed to meet your needs without breaking the bank.
From
Coil and Leaf Spring
replacements to
Shocks and Struts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 1962 Buick Invicta at great prices.
Our Suspension Parts inventory for this model
ranges from just $9.99 to $141.99, with
an average price of $37.75.
Our 8 Suspension Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1962 Buick Invicta without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1962 Buick Invicta, we stock popular OEM and aftermarket Suspension Parts from top names
like Valvoline, and more.
Valvoline Suspension Parts
start at just $36.49 and boast an impressive 5 stars average rating from customers.
With 494 customer reviews and counting, our 1962 Buick Invicta Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1962 Buick Invicta is always ready to roll. We’re committed to providing you with everything you need to keep your Invicta in top shape, all in one place.
Start shopping confidently below for your 1962 Buick Invicta!
Best-Selling Coil and Leaf Springs for 1962 Buick Invictas
Enhance the driving experience in your Buick with 2 quality Coil and Leaf Spring components, starting at $43.49.
Metro Mould – Coil Spring Insulator (Part No.BN 110)
from
$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
MOOG – Coil Spring Set (Part No.5030)
from
$141.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Most Popular 1962 Buick Invicta Shocks and Struts
Customize your Buick with 4 Shocks and Struts products
like Front Shock and Struts,
Strut Bellows, and
Shock Absorber Bushings, all
priced under $30.49.
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)
from
$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)
from
$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.
Product Features:
See More
Product Features:
- Protects the shock’s piston rod from damage
- Universal design for easy installation
- Tie-strap included for a secure fit
- Constructed from high quality urethane for maximum durability
- Multiple color choices available
Metro Mould – Shock Absorber Bushing (Part No.BN 11)
from
$12.29
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Shock Absorber Grommet. 1 In. bottom O.D. 3/4 In. high, with 5/8 In. I.D. Each.
Product Features:
See More
Product Features:
- Jet black to match the color of the original part
- Dense rubber to match the original
- Exact fit
- High quality original equipment replacement part
- Made in the USA
Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5759)
from
$30.49
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Top Picks for 1962 Buick Invicta Air Suspension and Kits
Upgrade Buick Invictas with top-quality Air Suspension and Kits parts, including 1 OEM and aftermarket selections for your 1962 model.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)
from
$36.49
Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
- High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
- Developed with anti-wear technology to help improve transmission durability
- Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V
In-Demand Control Arms for 1962 Buick Invictas
Select from 1 premium Control Arms parts for your 1962 Buick Invicta.
KAI – Control Arm Bumper (Part No.GMK4041972582)
from
$9.99
New Goodmark Front Upper Control Arm Bumper, Use 2
Product Features:
See More
Product Features:
- Use 2
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Top-Rated Suspension Parts Brands For Your 1962 Buick Invicta
Shop for the best-rated brands offering Suspension Parts and other products for your 1962 Buick Invictas. Below you’ll find some of our best rated Suspension Parts from Valvoline, and more. Suspension Parts from these brands that fit a 1962 Invicta start at just $36.49 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Valvoline 1962 Buick Invicta Suspension Parts
When it comes to maintaining or upgrading your 1962 Buick Invicta, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 1962 Buick Invicta. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$36.49
$36.49
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon
“Good product”
FAQs for 1962 Buick Invicta Suspension Parts
Which Suspension Parts are best-sellers for 1962 Buick Invictas?
Out of 8 Suspension Parts that fit 1962 Buick Invictas, the following parts are the top sellers:
- Coil Spring Insulator (10443012) – $43.49
- Control Arm Bumper (11750167) – $9.99
- Shock Absorber Bushing (10443080) – $12.29
What’s the price range for 1962 Buick Invicta Suspension Parts?
Suspension Part prices for the 1962 Buick Invicta start at $9.99 and go up to $141.99 for the most premium parts.
What’s the average price of a Suspension Part for a 1962 Buick Invicta?
The average price for Suspension Parts for the 1962 Buick Invicta is $37.75. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Suspension Parts for other Buick Invicta model years?
What are the cheapest Suspension Parts for my 1962 Buick Invicta?
The cheapest 1962 Buick Invicta Suspension Parts we carry in stock are:
- Control Arm Bumper (11750167) – $9.99
- Shock Absorber Bushing (10443080) – $12.29
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- OESpectrum Passenger Car Shock Absorber (19710786) – $30.49
What are the top-rated Suspension Parts that fit the 1962 Buick Invicta?
Out of 494 reviews by customers, our 1962 Buick Invicta Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 1962 Buick Invicta and their top-rated products:
- Shocks and Struts
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
What types of Suspension Parts do you sell for my 1962 Buick Invicta?
As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 1962 Buick Invicta:
Can I get help with 1962 Buick Invicta Suspension Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Buick Suspension Parts and more.
What is your return policy for Buick Invicta Suspension Parts?
Advance Auto Parts keeps returns simple. For new Buick Invicta Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
