1961 Mercury Monterey Performance Engines
More 1961 Mercury Monterey Performance Engines
Find your specific 1961 Mercury Monterey original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1961 Mercury Monterey Performance Engines
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1617)
from
$33.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Valve Cover Gasket (Part No.275)
from
$35.99
Valve Cover Gasket
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1632)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – Valve Cover Gasket Set for Ford (Part No.7569)
Edelbrock – Sure Seat Valve Springs for Ford 390-428 FE V8 1961-1976 (Part No.5806)
from
$72.99
Product Features:
See More
- Non-Rotator Type
- 1.458 in. Outer Diameter
- 1.062 in. Inner Diameter
- 1.062 in. Coil Blind
- Set of 16
Edelbrock – Sure Seat Valve Springs for S/B Ford 289/302/351W O.E. Cast iron heads (Part No.5722)
from
$76.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Sure Seat; Valve Spring (Part No.5972)
from
$47.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Mr. Gasket – Oil Pan Gasket (Part No.292)
from
$29.99
Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.
Product Features:
See More
Product Features:
- One-piece design
- Eliminates potential leaks
- Prevents over tightening
- Prevents torque loss
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1812)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1811)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1810)
from
$27.49
Fel-Pro Performance Gaskets keep engines sealed under the most grueling racing conditions, from stock car racing to drag racing to off-road
Product Features:
See More
Product Features:
- Performance oil pan gasket set
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Head Gasket (Part No.1132G)
from
$35.99
With the ever-increasing technology in performance and racing engines, supercharged, turbo charged, nitrous-oxide and extreme compression ratios, a demand was created for stronger, more durable engine gaskets. Mr. Gasket, the originator of high performance gaskets, has met the challenge and developed performance gaskets in a variety of materials for all applications to meet the sealing demands of these engines. Mr. Gasket engine gaskets are the most advanced, tested and proven in the performance market today and earned the respect of many professional and sportsman racers.
Product Features:
See More
Product Features:
- Embossed copper
- Provides excellent stability and reduces cyl distortion
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1018)
from
$49.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – MLS Head Gasket (Part No.3175G)
from
$103.99
Manufactured from nitrile coated spring steel layers. Stress formed embossment provides excellent sealing. Also provides stability and reduces cylinder bore distortion. Ideal for super charged, turbo charged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track. Packaged individually.
Product Features:
See More
Product Features:
- Ss layers with a elastomer coating
- Stress formed embossments to seal ext pressure
- Provides stability and reduces cyl distortion
- For high performance street drag and oval track
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1013)
from
$58.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 7 Piece Set (Part No.1240)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-82; w/2 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1230)
from
$38.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Gasket (Part No.206G)
from
$35.99
Mr. Gasket standard intake gasket sets are manufactured from a blend of nitrile rubber and fiber, for excellent sealing and durability. They’re precision die-cut for each specific application to ensure a great fit, and can be custom-trimmed for modified ports where needed. The sets come complete with all necessary seals and block-off plates.
Product Features:
See More
Product Features:
- Designed to ensure excellent sealing
- Provides long lasting durability
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1228)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- 1970-74; w/4 Bbl. Cylinder heads
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – Intake Manifold Gasket for 1968-1987 429-460 Big-Block Fords (Part No.7223)
from
$27.99
Product Features:
See More
- 1.98″x2.26″
- Features Embossed Silicone Bead Around The Intake Ports & Water Openings
- .060″ Thick
- Multi Piece Configuration
- End Seals Not Included
Edelbrock – Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish (Part No.2166)
from
$397.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Edelbrock – Performer 390 Intake Manifold for Ford FE, Polished Finish (Part No.21051)
from
$875.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer 351 Intake Manifold for Ford 351- 2V Cleveland Engine (Part No.2750)
from
$416.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$19.99
Choose from grade 5 hex or socket head intake bolts or grade 8 bolts with twelve point smaller-than-standard head and flange, ideal for where space is minimal. Bolts and washers are bright zinc plated for protection and appearance.
Product Features:
See More
Product Features:
- Grade 8 material
- Extra thick flat washers
- Ideal for minimal space
- 12-pt head and flange
- Zinc plated for protection
Edelbrock – Performer 400; Intake Manifold (Part No.21711)
from
$547.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer 460; Intake Manifold (Part No.21661)
from
$604.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Popular 1961 Mercury Monterey Performance Engines Categories
1961 Mercury Monterey Performance Engines
Maybe you’re in the middle of a full rebuild of that 1961 Mercury Monterey. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 11 different Performance Engines in our inventory ranging from $27.49 to $875.99. That means you can find the exact parts or products you need to keep that 1961 Mercury Monterey running smoothly.
Performance Engines are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Mercury Monterey. FEL-PRO Performance, Edelbrock, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1961 Mercury Monterey, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1961 Mercury Monterey rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1961 Mercury Monterey Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Mercury Monterey demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Monterey the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular FEL-PRO Performance Performance Engines
We carry FEL-PRO Performance parts in our stock across Performance Engine Cylinder Head Gaskets categories, plus more. For a 1961 Mercury Monterey, our most popular FEL-PRO Performance Performance Engines include:
from
$41.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
FAQs for 1961 Mercury Monterey Performance Engines
What are the most purchased Performance Engines for the 1961 Mercury Monterey?
Out of 11 Performance Engines for the 1961 Mercury Monterey, the most popular in our inventory are:
from
$27.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets
from
$39.99
This product is not rated
Lower Intake Manifold Gasket Set: 5 Piece Set
Performance Engine Intake Manifold Gaskets
from
$31.49
This product is not rated
Engine Valve Cover Gasket Set
Performance Engine Valve Cover Gasket Sets
