1961 Dodge W100 Series Universal Joints

Essential 1961 Dodge W100 Series Universal Joints

Yukon Gear – 7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33246)

7290 U-Joint Strap Bolt (One Bolt Only) For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$10.99
7290 U-joint strap bolt (one bolt only) for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • U-Joint strap bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
  • 7290 u-joint size
See More

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.365)

Non-Greaseable Super Strength Universal Joint

from

$25.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
  • KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
See More

Driveworks – Universal Joint (Part No.DW-365)

Universal Joint

from

$19.29
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

1310 U/Joint With Zerk Fitting On Cross

from

$42.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More

Yukon Gear – Axle U/Joint For Dana 30, 44 & GM 8.5" Front (Part No.42018)

Axle U/Joint For Dana 30, 44 & GM 8.5" Front

from

$73.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits standard rotation Dana Spicer 44 TJ Rubicon
  • 8.50″ ring gear diameter
  • 26 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

Spicer – Universal Joint (Part No.5-260X)

Universal Joint

from

$47.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
See More

MOOG Driveline Products – Universal Joint Strap Kit (Part No.318-10)

Universal Joint Strap Kit

from

$14.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • For U-Joints 315G, 317, 319 & 457
  • Contains two 1-1/2″ bolt center clamps and four 1/4-28 x 5/8″ cap screws
See More

Yukon Gear – 7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25" (Part No.41013)

7290 U/Joint Strap Kit (4 Bolts And 2 Straps) For Chrysler 7.25", 8.25", 8.75", And 9.25"

from

$52.99
7290 U/joint strap kit (4 bolts and 2 straps) for Chrysler 7.25″, 8.25″, 8.75″, and 9.25″.

Product Features:
  • u-joint strap kit
  • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
  • 7290 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)

1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts

from

$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.

Product Features:
  • u-joint strap kit
  • Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
  • 1310 and 1330 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)

7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25

from

$42.99
7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.

Product Features:
  • u-joint strap kit
  • Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
  • 7260 u-joint size
  • Includes two straps and four bolts
See More

Yukon Gear – (4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle (Part No.32084)

(4) Full Circle Snap Rings, Fit 297X U-Joint With Aftermarket Axle

from

$19.99
(4) Full Circle snap rings, fit 297X U-joint with aftermarket axle.

Product Features:
  • Set of four full circle snap rings for Dana Spicer 30 and 44 and GM 8.5″ front
See More

Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)

Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts

from

$30.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.

Product Features:
  • u-joint u-bolt kit
  • Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
  • 1310 u-joint size
  • Includes two u-bolts and four nuts
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)

Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size

from

$147.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1310 u-joint size
  • 3.219″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41020)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$125.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 44
  • 26 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.125″ cap diameter
  • Outside snap ring design
  • U-bolt style
See More

1961 Dodge W100 Series Universal Joints

Maybe you’re in the middle of a full rebuild of that 1961 Dodge W100 Series. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 36 different Universal Joints in our inventory ranging from $3.99 to $684.99. That means you can find the exact parts or products you need to keep that 1961 Dodge W100 Series running smoothly.

Universal Joints are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Dodge W100 Series. Moog, DriveWorks, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Universal Joints for your 1961 Dodge W100 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 54 reviews in this category, some of the top rated parts include Universal Joint with 3.9 stars and Universal Joint with 2.5 stars.

So if you’re in the market for aftermarket Universal Joints to keep your 1961 Dodge W100 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Universal Joints Brands To Make Your 1961 Dodge W100 Series Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Dodge W100 Series demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your W100 Series the best it can be. Be sure to browse some of our top Universal Joints brands and parts.

Popular Driveworks Universal Joints

We carry Driveworks parts in our stock across U-Joints categories, plus more. For a 1961 Dodge W100 Series, our most popular Driveworks Universal Joints include:
Universal Joint
from $15.79
(1)
Universal Joint
U-Joints
Universal Joint
from $19.29
(3)
Universal Joint
U-Joints

FAQs for 1961 Dodge W100 Series Universal Joints

What are the most purchased Universal Joints for the 1961 Dodge W100 Series?

Out of 36 Universal Joints for the 1961 Dodge W100 Series, the most popular in our inventory are:
Greaseable Premium Universal Joint
from $28.99
(1)
Greaseable Premium Universal Joint
U-Joints
Universal Joint
from $47.99
(2)
Universal Joint
U-Joints
1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts
from $18.99
This product is not rated
1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts
U-Joint Strap Kits

What are the top-rated 1961 Dodge W100 Series Universal Joints?

Top-rated Universal Joints for your 1961 Dodge W100 Series based on customer reviews/ratings are:
Universal Joint
from $8.39
(7)
Universal Joint
“N/A”
Universal Joint
from $5.39
(2)
Universal Joint
“they fit,,,need to be stronger,,,”