1961 Dodge Custom Performance and Racing Products
Find Your Specific 1961 Dodge Custom Performance and Racing Products
Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 1961 Custom. Advance Auto Parts has popular Custom parts like Performance Engines, Performance Exhaust Products, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Custom model years including
1955,
1956,
1957,
1958,
1959,
1960,
1962,
1964,
1965 and more. Select a category of 1961 Dodge Custom Performance and Racing Products below and start saving instantly.
Popular 1961 Dodge Custom Performance and Racing Products Categories
Essential Performance and Racing Products for 1961 Dodge Customs
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7804)
from
$101.99Product Features:
- Solid Bushing Chain Resists Stretching
- For Use with Stock or Edelbrock Camshafts
- Stressproof Steel Crank Gears
- 3 Keyway Setting Points To Ensure Accurate Timing
- True Bearing Surface Rolls with the Sprockets
Mr. Gasket – Dust Cap (Part No.2485)
from
$14.29
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- Set of 2 Caps
- Easy Installation
- 2 Per Set
Energy Suspension – Sway Bar Bushing Set (Part No.5.5115R)
from
$18.29
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1009)
from
$66.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit (Part No.K21-223-4)
from
$678.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1462)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Competition Cams – Thumpr 227/241 Hydraulic Roller Cam (Part No.23-600-9)
from
$531.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1540)
from
$149.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
B & M – Automatic Shifter, Pro Stick Shift with CVR (Part No.80706)
from
$483.99
The Original Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate, a reverse lockout feature that only requires one hand to operate, and complies with NHRA/IHRA safety rules. Then add the billet aluminum shift handle with classic white shift knob, lightweight aluminum trigger and finish it off with a brushed aluminum cover with quick release pins, and you end up with one good looking bullet-proof race shifter. Optional Forward and Reverse shift pattern gate plates are available for most popular 2, 3 and 4-speed transmissions. This model Pro Stick comes out of the box ready for action for most popular 3-speed transmissions, includes a 5-foot Super Duty shift cable, brackets, levers, hardware and detailed instructions for an easy installation. Be sure to check out all the optional Magnum Grip side grip plates including the one and two button 12-volt momentary switches or any of the other accessories we offer for the Pro Stick in the Shifter Accessories section. Notes: AOD requires installation kit #40496, AODE & 4R70W requires installation kit #40504, E40D & 4R100 requires installation kit #40505, 2004R & 700R4 require gate plate #80712, 4L60E – 4L85E equipped with PRNDL switch requires cable bracket kit #70499 and gate plate #80712. Overall Dimensions – 8.25L x 2.92W x 9.25H
Product Features:
See More
Product Features:
- All One-Handed
- Reverse Lockout Meets NHRA And IHRA Requirements
- Mount Directly To Floor/Chassis/Or w/Quick Release
- Ultimate For Powerglide Applications
- Lightweight Brushed Alum. Cover
- Cover Removed Quickly and Easily
- Includes 5 Ft. Super Duty Race Cable
- Quick Change Plate Design
Energy Suspension – Control Arm Bushing Set (Part No.5.3132G)
from
$67.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$149.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
Edelbrock – Performer RPM Series fuel pump is for Big-Block Chrysler (Part No.1723)
from
$205.99
Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage po
See More
Edelbrock – CH-28 Chrysler Big Block RB Dual-Quad Intake Manifold (Part No.5440)
from
$530.99
Product Features:
See More
- Designed for 1500 to 6000 RPM Performance
- Manifold has a Balanced 180+ Firing Order
- Smooth and Consistent Part-Throttle Power
- Offers Excellent Performance Potential
- Carburetor Center-To-Center Dimensions 6.4375 in
- Match with Other Dual-Quad Items for Total Package
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
Edelbrock – Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin (Part No.8814)
from
$249.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1611)
from
$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Valve Cover Gasket Set (Part No.378)
from
$42.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Upgrade your 1961 Dodge Custom with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1961 Dodge Custom, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Custom functioning at its best. At Advance Auto Parts, we offer a wide selection of 65 Performance and Racing Products for the 1961 Dodge Custom, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1961 Dodge Custom at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $14.29 to $1,054.99, with
an average price of $296.60.
Our 65 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1961 Dodge Custom without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1961 Dodge Custom, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, Holley, B & M, and more.
Edelbrock Performance and Racing Products
start at just $394.99 and boast an impressive 4.4 stars average rating from customers.
Holley and B & M also bring quality to the table, with Performance and Racing Products available starting at $371.99, and at an average 4.2 stars rating.
With 236 customer reviews and counting, our 1961 Dodge Custom Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1961 Dodge Custom is always ready to roll. We’re committed to providing you with everything you need to keep your Custom in top shape, all in one place.
Start shopping confidently below for your 1961 Dodge Custom!
Best-Selling Performance Engines for 1961 Dodge Customs
Enhance the driving experience in your Dodge with 39 quality Performance Engine components, starting at $18.29.
Mr. Gasket – Intake Manifold Bolts (Part No.955G)
from
$18.29
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.
Product Features:
See More
Product Features:
- Grade 5 socket head bolts are zinc plated for protection and appearance
- Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
- Washers Included
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – High Performance Thermostat (Part No.4367)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 8 Piece Set (Part No.1215)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Mr. Gasket – Intake Manifold Bolt Set – Chevrolet Small Block – Socket Head 3/8"-16 X 1" Bolts & Washers (Part No.956G)
from
$20.79
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8 inch-16 x 1 inch bolts & washers
Product Features:
See More
Product Features:
- Zinc plated to resist corrosion and provide a clean professional appearance
- Made from Grade 5 steel for strength and durability
- Flat washers provide uniform clamp load and prevent galling on aluminum intake manifolds
- Allen (socket) Head
- Zinc Plated For Protection
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 4 Piece Set (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Gasket (Part No.301)
from
$42.99
Mr. Gasket Performance Series intake gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Performance Material – Cellulose/Nitrile Composition
- .060″ Thick
- Can Be Trimmed To Meet Your Specifications
Competition Cams – ENGINE ROCKER ARM (Part No.1621-16)
from
$1054.99
ENGINE ROCKER ARM
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam K-Kit (Part No.K21-600-5)
from
$837.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chrysler 383-440 (Part No.CL21-232-4)
from
$716.99
Xtreme Energy 244/252 Solid Flat Cam and Lifter Kit for Chrysler 383-440
Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit (Part No.K21-223-4)
from
$678.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam and Lifter Kit Chrysler 383-440 (Part No.CL21-227-4)
from
$598.99
Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam and Lifter Kit Chrysler 383-440
Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.21-215-4)
from
$478.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – Magnum 224/224 Hydraulic Flat Cam and Lifter Kit (Part No.CL21-306-4)
from
$449.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
Product Features:
See More
Product Features:
- Best with aftermarket torque converters and 9.5:1 compression.
- Great high RPM power.
- Easy on valve train parts.
- Can be used with mild ratio rocker arms and traditional performance valve springs.
Competition Cams – Xtreme Energy 244/252 Solid Flat Cam for Chrysler 383-440 (Part No.21-232-4)
from
$439.99
Xtreme Energy 244/252 Solid Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy 230/236 Solid Flat Cam for Chrysler 383-440 (Part No.21-230-4)
from
$426.99
Xtreme Energy 230/236 Solid Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy 230/236 Solid Flat Cam for Chrysler 383-440 (Part No.23-230-4)
from
$419.99
Xtreme Energy 230/236 Solid Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy 244/252 Solid Flat Cam for Chrysler 383-440 (Part No.23-232-4)
from
$401.99
Xtreme Energy 244/252 Solid Flat Cam for Chrysler 383-440
Competition Cams – Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 383-440 (Part No.21-670-4)
from
$385.99
Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam for Chrysler 383-440 (Part No.21-227-4)
from
$385.99
Xtreme Energy HI-LIFT 231/237 Hydraulic Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam for Chrysler 383-440 (Part No.21-228-4)
from
$385.99
Xtreme Energy HI-LIFT 241/247 Hydraulic Flat Cam for Chrysler 383-440
Competition Cams – Xtreme Energy 206/212 Hydraulic Flat Cam (Part No.21-220-4)
from
$297.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Most Popular 1961 Dodge Custom Performance Exhaust Products
Customize your Dodge with 1 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets, all
priced under $42.99.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1414)
from
$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top Picks for 1961 Dodge Custom Performance Air Filters
Upgrade Dodge Customs with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 1961 model.
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1540)
from
$149.99
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
In-Demand Performance Fuel Systems for 1961 Dodge Customs
Select from 8 premium Performance Fuel Systems parts for your 1961 Dodge Custom, with prices ranging from $205.99 to $819.99.
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$509.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)
from
$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Manual Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Prem Street Carbs (Avengers) (Part No.0-80770)
from
$716.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Edelbrock – Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9905)
from
$437.99
The Edelbrock 9905 Remanufactured Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9905 Remanufactured Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
See More
Holley – Off Road Carbs (Part No.0-90670)
from
$819.99
The off-road truck avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off road environment. The 470 CFM off-road truck avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. Viton(R) is a registered trademark of DuPont Performance Elastomers.
Product Features:
See More
Product Features:
- Gold Dichromate Finish For Extreme Off Road Environments
- Single Feed Fuel Inlet For Ease Of Installation
- Optimized Off-Road Calibration That Works Out-Of-The-Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- One Piece Off-Road Vent Tube Eliminates Fuel Spillover
- Metering Block For Flood Free Op. 40 deg. Climb/30 deg. Side Hill
- Limited Lifetime Warranty Defects In Material/Workmanship
Edelbrock – Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No.9907)
from
$407.99
Product Features:
See More
- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
Edelbrock – Performer RPM Series fuel pump is for Big-Block Chrysler (Part No.1723)
from
$205.99
Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high-performance’s street Fuel Pumps feature a high quality three stage po
See More
Most Sold 1961 Dodge Custom Performance Ignition Products
Explore our best-selling Dodge parts for the 1961 Custom among 5 OEM and aftermarket options starting from $34.49.
Mallory – Unilite Ignition Module (Part No.605)
from
$95.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
MSD Ignition – Blaster 2 Coil: High Performance Ignition Upgrade (Part No.8202)
from
$55.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$204.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.503M)
from
$179.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Top-Rated Performance and Racing Products Brands For Your 1961 Dodge Custom
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1961 Dodge Customs. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, Holley, and B & M, and more. Performance and Racing Products from these brands that fit a 1961 Custom start at just $371.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1961 Dodge Custom Performance and Racing Products
When it comes to maintaining or upgrading your 1961 Dodge Custom, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1961 Dodge Custom. With over 2 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $394.99, with an average price of just $416.49. Plus, with over 11 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$437.99
(1)
Performer Remanufactured Carburetor, 600 CFM With Manual Choke, Satin Finish (Non-EGR)
“works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not ”
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
Popular Holley 1961 Dodge Custom Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1961 Dodge Custom owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1961 Custom, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Holley Performance and Racing Products range from $509.99 to $716.99, plus, with more than 53 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$699.99
(6)
Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny
“great carb”
from
$509.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”
FAQs for 1961 Dodge Custom Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1961 Dodge Customs?
Out of 65 Performance and Racing Products that fit 1961 Dodge Customs, the following parts are the top sellers:
- Intake Manifold Bolts (6120970) – $18.29
- Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020654) – $394.99
- High Performance Thermostat (22903643) – $31.99
What’s the price range for 1961 Dodge Custom Performance and Racing Products?
Performance and Racing Product prices for the 1961 Dodge Custom start at $14.29 and go up to $1,054.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1961 Dodge Custom?
The average price for Performance and Racing Products for the 1961 Dodge Custom is $296.60. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Dodge Custom model years?
What are the cheapest Performance and Racing Products for my 1961 Dodge Custom?
The cheapest 1961 Dodge Custom Performance and Racing Products we carry in stock are:
- Dust Cap (22901302) – $14.29
- Intake Manifold Bolts (6120970) – $18.29
- Sway Bar Bushing Set (22906457) – $18.29
- Sway Bar Bushing Set (22906452) – $18.29
- Sway Bar Bushing Set (22906453) – $18.29
What are the top-rated Performance and Racing Products that fit the 1961 Dodge Custom?
Out of 236 reviews by customers, our 1961 Dodge Custom Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1961 Dodge Custom and their top-rated products:
- Performance Air Filters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400432) – $149.99
- Performance Shifters
- Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (17400432) – $149.99
What types of Performance and Racing Products do you sell for my 1961 Dodge Custom?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 1961 Dodge Custom:
Can I get help with 1961 Dodge Custom Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.
What is your return policy for Dodge Custom Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Dodge Custom Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
