1961 Chrysler 300 Performance and Racing Products

Essential 1961 Chrysler 300 Performance and Racing Products

Edelbrock – Big-Block Chrysler E-Street Cylinder Heads 84cc (Part No.5093)

Big-Block Chrysler E-Street Cylinder Heads 84cc

from

$2198.99
The Edelbrock #5093 E-Street cylinder heads are designed for use with 1961-1979 Chrysler 361-440 c.i.d. Wedge engine applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads featur

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 84cc Combustion Chamber Volume
  • 210cc Intake/70cc Exhaust Runner Volume
  • 2.14 in. Intake/1.81 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1611)

Performance Valve Cover Gasket Set

from

$20.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)

High Perf. Full-Flow Lube Spin-on

from

$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

Product Features:
  • Proven protection for up to 10,000 miles
  • Engineered for use with synthetic or conventional motor oils
  • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
  • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
See More

Edelbrock – Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin (Part No.8814)

Water Pump #8814 For 1958-79 BB Chrysler 361-440, Standard Rotation, Satin

from

$237.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Powertrax – Lock Right Locker (Part No.1230-LR)

Lock Right Locker

from

$450.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Precision Timing Tape (Part No.1593)

    Precision Timing Tape

    from

    $18.99
    Precision timing tape can be used on a factory balancer to create HP through accurate timing, and makes setting valve lash simple.

    Product Features:
    • 7 1¿4″ diameter
    • 7 1┐4″ diameter
    • 383 thru 440 cu. in.
    • Increased Performance
    • Set Valve Lash At Proper Time
    See More

    Mr. Gasket – Oil Pan Bolt Kit (Part No.6088)

    Oil Pan Bolt Kit

    from

    $18.99
    Oil Pan Bolt Kit

    Mallory – Distributor Wiring Harness (Part No.29349)

    Distributor Wiring Harness

    from

    $30.49


    Product Features:
    • Service Part
    • Makes Connections Quick And Easy
    See More

    Competition Cams – High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for Chrysler 383-440 (Part No.CL21-215-4)

    High Energy 218/218 Hydraulic Flat Cam and Lifter Kit for Chrysler 383-440

    from

    $1499.99
    Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

    Product Features:
    • Good blend of efficiency and performance.
    • Perfect choice for performance street rebuilds.
    • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
    See More

    Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)

    Super Intake Manifold Bolts

    from

    $27.49
    These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.

    Product Features:
    • Assures Accurate Torque App
    • Prevents Galling Manifold
    • Grade 5 Material
    • Black Oxide Coasted
    See More

    Edelbrock – Performer-Link Adjustable True-Roller Timing Chain Set (Part No.7804)

    Performer-Link Adjustable True-Roller Timing Chain Set

    from

    $96.99


    Product Features:
    • Solid Bushing Chain Resists Stretching
    • For Use with Stock or Edelbrock Camshafts
    • Stressproof Steel Crank Gears
    • 3 Keyway Setting Points To Ensure Accurate Timing
    • True Bearing Surface Rolls with the Sprockets
    See More

    Edelbrock – Signature Series Valve Covers: Big Block Chrysler 383-440, Chrome Steel (Part No.4491)

    Signature Series Valve Covers: Big Block Chrysler 383-440, Chrome Steel

    from

    $81.99
    The Edelbrock #4491 Signature Series Valve Covers are designed for Chrysler 361-383-400-413-426-440 V8 ’58-79 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

    Product Features:
    • Big Block Chrysler 383-440
    • Short
    • Chrome Steel
    • Set Of Two
    • Rubber Grommets For Breather
    See More

    Mr. Gasket – Intake Manifold Bolts (Part No.6091)

    Intake Manifold Bolts

    from

    $32.09
    These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

    Product Features:
    • Features 12-point Smaller-than-standard Bolt Head
    • Thick Flat Washers Distribute Optimum Clamp Load
    • Ideal Use Where Space Is Minimal On Race Manifolds
    • Bolts And Washers Zinc Plated For Protection
    • Zinc Plated For Protection
    See More

    Holley – Mechanical Fuel Pump (Part No.12-440-11)

    Mechanical Fuel Pump

    from

    $206.99
    Mechanical fuel pump made from heavy duty construction for continuous high RPM operation. Fuel body casting can be rotated to accommodate various plumbing situations. Fuel pressure regulator is not required.

    Product Features:
    • High Output Fuel Flow
    • Flows 110 gph Free Flow
    • Shutoff Pressure Pre-Set From 6.5 To 8 PSI
    • Fuel Pressure Regulator Is Not Required
    • Heavy Duty Construction For Continuous High rpm Operation
    • Fuel Body Casting Can Be Rotated For Plumbing Situations
    • Inlet And Outlet Tapped For 1/4 in. NPT
    • Inlet/Outlet Tapped For 3/8 in. NPT
    See More

    MSD Ignition – Distributor; Chrysler 383-400; Ready-to-Run (Part No.8386)

    Distributor; Chrysler 383-400; Ready-to-Run

    from

    $654.99
    MSD’s Ready-to-Run Pro-Billet distributors for Chrysler engines are the perfect upgrade from breaker points or weak electronic ignitions. These distributors feature a maintenance-free magnetic pick-up that accurately triggers the built-in powerful ignition module. This module produces a high-output spark which improves combustion in the cylinder, resulting in quick starts, a smooth idle and great performance. Just beneath the race rotor is a mechanical advance assembly so a timing curve can easily be tailored to match your application. The QPQ coated shaft is guided by a sealed ball bearing assembly for stability and endurance while a vacuum advance canister helps increase economy on those long cruises. The Ready-to-Run distributors are also a breeze to install. Simply drop it in the engine and connect three wires and you’re Ready-to-Run to your favorite cruise! The front engine mount models are designed in a special small diameter housing to clear aftermarket heads and valve covers.

    Product Features:
    • Simple and clean three wire installation
    • CARB E.O. Approved
    • Supplied w/HEI Style Distributor Cap And Rotor
    • Accepts Cap-A-Dapts
    • Mech. advance assem. can be locked out for crank trigger systems
    • QPQ coated polished steel shaft; guided by sealed ball bearings
    • Maintenance-free magnetic pickup and precision reluctor
    • Creates stable trigger signals throughout the rpm range
    See More

    Accel – Module:Eliminator Replacement (Part No.2005)

    Module:Eliminator Replacement

    from

    $91.99
    Put an end to high maintenance point ignition systems by utilizing a specialized electronic circuitry and an infrared signal. Stabilizes ignition timing from 1 to 10,000 RPM. Improves performance and fuel efficiency, easy to install with hand tools, reduces maintenance. It is built with the latest thermal clad based surface mount construction for maximum dependability and long life.

    Product Features:
    • Most Accurate Ignition Timing System
    • Improves Performance And Fuel Economy
    • Easy To Install With Simple Hand Tools
    • Reduced Maintenance
    • Eliminates Changing Points
    See More

    FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1808)

    PERFORMANCE OIL PAN GASKET SET

    from

    $17.29
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
    • With steel core to provide ultimate excellent blowout resistance.
    • Not intended for use in emission controlled vehicles.
    See More

    FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2947)

    Engine Crankshaft Seal Kit

    from

    $48.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
    • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
    • Not intended for use in emission controlled vehicles.
    See More

    Edelbrock – Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9913)

    Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR)

    from

    $427.99
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 750 cfm Maximum Flow Rating
    See More

    MSD Ignition – Coil; 5.7/6.1L HEMI; 05-14; Single (Part No.8255)

    Coil; 5.7/6.1L HEMI; 05-14; Single

    from

    $103.99
    Fire up your late model hemi with a set of MSD’s blaster coils. The coils are a direct bolt-in and are spec’d with superior materials and winding ratios to improve the output of the coil while retaining the factory fit.

    Product Features:
    • Improved High RPM Operation
    • Patented Winding Design and Materials
    • Direct Bolt-In to Factory Connectors
    • Secondary Current (mA): 56 mA
    See More

    Spectre – Water Neck; Chrysler (Part No.4739)

    Water Neck; Chrysler

    from

    $23.79
    Spectre’s Chrysler water neck fits 1964 and later Chrysler V8 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck includes bolts.

    Product Features:
    • Fits 1964 and later Chrysler V8 engines
    • Includes bolts
    • Chrome plated
    • Easy to install
    • O-ring/gasket not included
    See More

    Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7167)

    Copper Seal; Exhaust Gasket Set

    from

    $60.29
    Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.

    Product Features:
    • Will Not Shrink/Deteriorate
    • Creates A Tight Leak Proof Seal
    • Helps Lower Under hood Temps
    • Seals Irregular Surfaces
    • Seals Slightly Damaged Surface
    • Ideal For Tow Vehicles
    • Ideal For Motor Homes
    See More

    Richmond Gear – RngPnn (Part No.69-0375-1)

    RngPnn

    from

    $342.99
    RngPnn

    Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Mr. Gasket – High Performance Thermostat (Part No.4366)

    High Performance Thermostat

    from

    $26.99
    Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

    Product Features:
    • Opens at 160 Degrees
    • Designed to Resist Large Variations of Coolant Pressure at High RPM
    • Opens at Correct Temperature Consistently Regardless of Engine RPM
    • For High Performance Street, Drag Race, and Oval Track
    • Stainless Steel, Copper & Brass Construction – Resists Corrosion
    • High Flow
    See More

    Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

    VALVE SPRINGS, 1.509" DUAL 1 ST

    from

    $788.99
    Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

    Product Features:
    • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
    • O.D.: 1.509″, I.D.: 0.697″
    • Dual valve springs with damper
    See More

    Accel – Ignition/Electrical (Part No.8321)

    Ignition/Electrical

    from

    $717.99


    Product Features:
    • Heavy Duty Cap and Rotor Kit
    • With Brass Inserts
    See More

    Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

    VALVE SEALS, TEFLON 3/8" 1 ST

    from

    $31.99
    COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

    Product Features:
    • Work with .530″ guides and 3/8″ valve stem diameter
    • Valve stem oil seals keep unwanted oil from entering the combustion chamber
    • Several different types of valve seals are offered
    See More

    1961 Chrysler 300 Performance and Racing Products

    You count on your 1961 Chrysler 300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 48 Performance and Racing Products ranging in price from $16.99 to $2,198.99, you’re sure to find everything you need for your 1961 Chrysler 300.

    Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 13 different brands like Accel, Edelbrock, and FEL-PRO Performance. 1961 Chrysler 300 Performance and Racing Products start as low as $16.99!

    One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 151 extensive product reviews on 1961 Chrysler 300 Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Intake Manifold Bolts with 4.6 stars and Unilite Ignition Module with 5.0 stars.

    Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1961 Chrysler 300 below to get started!

    Top-Rated Performance and Racing Products Brands For Your 1961 Chrysler 300

    Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1961 Chrysler 300 running right for years to come. In our inventory you’ll find brands like Accel, Edelbrock, FEL-PRO Performance, and even more.

    Popular Competition Cams Performance and Racing Products

    You’ll find popular Competition Cams brand products across Performance Engines. All are waiting to get your 1961 Chrysler 300 back on the road. Some of the top-rated Competition Cams products in these categories are:
    VALVE SEALS, TEFLON 3/8" 1 ST
    from $31.99
    (1)
    VALVE SEALS, TEFLON 3/8" 1 ST
    Performance Engine Valve Stem Seal Sets
    Engine Valve Spring Kit
    from $759.99
    (1)
    Engine Valve Spring Kit
    Performance Engine Valve Springs

    Top-Rated Edelbrock Performance and Racing Products


    If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1961 Chrysler 300, and some of our most reviewed Edelbrock parts include:

    FAQs for 1961 Chrysler 300 Performance and Racing Products

    What are the most purchased Performance and Racing Products for the 1961 Chrysler 300?

    Out of 48 Performance and Racing Products for the 1961 Chrysler 300, the most popular in our inventory are:
    High Perf. Full-Flow Lube Spin-on
    from $16.99
    (4)
    High Perf. Full-Flow Lube Spin-on
    Performance Oil Filters
    PERFORMANCE OIL PAN GASKET SET
    from $17.29
    (3)
    PERFORMANCE OIL PAN GASKET SET
    Performance Engine Oil Pan Gaskets

    What are the top-rated 1961 Chrysler 300 Performance and Racing Products?

    Top-rated Performance and Racing Products for your 1961 Chrysler 300 based on customer reviews/ratings are:
    Intake Manifold Bolts
    from $32.09
    (5)
    Intake Manifold Bolts
    “Excellent product.”
    Unilite Ignition Module
    from $85.29
    (3)
    Unilite Ignition Module
    “I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
    Water Neck; Chrysler
    from $23.79
    (3)
    Water Neck; Chrysler
    “Very nice affordable replacement”