1961 Chevrolet P10 Series Performance and Racing Products
More 1961 Chevrolet P10 Series Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1961 Chevrolet P10 Series, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1961 Chevrolet P10 Series Performance and Racing Products
Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Edelbrock – Performer RPM Series fuel pump for SBC and W Series Chevy (Part No.1721)
from
$168.99Product Features:
- Unique Valve Design
- Improves Flow Quantity/Quality
- Supports Engines Up To 550 HP
- Hi-Vol 0.375 in. NPT Inlet/Outlet
- Produces 6 psi
- Gasoline Or Mixed Fuels Only
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Weiand – Team G Intake Manifold (Part No.7532)
from
$389.99
Team G Intake Manifold
Weiand – Team G; Intake Manifold (Part No.7531)
from
$999.99Product Features:
- Designed For Today’s Larger Cubic Inch Big Block
- Perfect For Hard Core Drag Racers
- Permanent Mold Casting Process
- For Lighter And More Consistent Castings
- Dyno Proven To Make 17hp More Than Competitors
Mr. Gasket – Alternator Bracket (Part No.9850)
from
$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.
Product Features:
See More
Product Features:
- Chrome Plated Steel
- F-Style
- Heavy Gauge Steel Construction
- Fits Small Block Chevy 265-400 CID
- Must Be Used With Part 9852
Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)
from
$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.
Product Features:
See More
Product Features:
- 2 in. adjustable range
- Includes necessary hardware
- Chrome plated
- Individually packaged
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Chrome Plated Engine Oil Pan (Part No.9781)
from
$89.99
This Mr. Gasket Oil Pan comes in chrome plated steel. Complete with drain plug, washer & bolts. Stock depth and capacity. Gasket & chrome-plated dipsticks with tubes sold separately.
Product Features:
See More
Product Features:
- Chrome plated steel
- Complete with drain plug, washer and bolts
- Stock depth and capacity
Competition Cams – Xtreme Energy 250/256 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block (Part No.CL12-254-3)
from
$321.99
SMALL BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy: Pro Street/bracket, needs good intake, headers, gear and 3300+ stall.
Product Features:
See More
Product Features:
- Cam and lifter kit for Small Block Chevy engines
- CL-Kit includes cam, lifters, assembly lube, instructions and decals
- HYDRAULIC – Xtreme Energy: Pro Street/bracket, needs good intake, headers, gear and 3300+ stall.
- 294/306 Advertised Duration, 250/256 Duration @ .050″, .519″/.523″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT (Part No.CL12-206-2)
from
$323.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2900)
from
$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)
from
$36.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1640)
from
$22.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Intake Manifold Bolts (Part No.6091)
from
$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
Product Features:
See More
Product Features:
- Features 12-point Smaller-than-standard Bolt Head
- Thick Flat Washers Distribute Optimum Clamp Load
- Ideal Use Where Space Is Minimal On Race Manifolds
- Bolts And Washers Zinc Plated For Protection
- Zinc Plated For Protection
FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)
from
$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Steel core gasket construction
- Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
- Not intended for use in emission controlled vehicles.
Competition Cams – CAMSHAFT, SBC 249 XTREME ENERGY COMPUTER CONTROLLED HYDRAULIC 1 EA (Part No.12-249-4)
from
$276.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts, the Xtreme Energy grind family offers gains in torque and horsepower while still delivering adequate vacuum for power brakes and other vacuum dependent accessories. Xtreme Energy camshafts work great in carbureted applications, but offer the best performance with aftermarket intake manifolds, lower gear ratios, headers and free flowing exhaust.
Product Features:
See More
Product Features:
- HYDRAULIC – Xtreme Energy Computer Controlled: Great in throttle body, crossfire or carbureted engine and 305 TPI.
- 249/260 Advertised Duration, 206/212 Duration @ .050″, .434″/.444″ Lift, 112 Lobe Separation
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block (Part No.12-206-2)
from
$284.99
HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
Product Features:
See More
Product Features:
- HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
- 260/260 Advertised Duration, 212/212 Duration @ .050″, .440″/.440″ Lift, 110 Lobe Separation
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – CAMSHAFT, SBC 268 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-210-2)
from
$537.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Competition Cams – THUMPR CAMSHAFT, SBC 1 EA (Part No.12-600-4)
from
$587.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1819)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)
from
$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Popular 1961 Chevrolet P10 Series Performance and Racing Products Categories
1961 Chevrolet P10 Series Performance and Racing Products
You count on your 1961 Chevrolet P10 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 33 Performance and Racing Products ranging in price from $14.99 to $999.99, you’re sure to find everything you need for your 1961 Chevrolet P10 Series.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 6 different brands like FEL-PRO Performance, Mr. Gasket, and Edelbrock. 1961 Chevrolet P10 Series Performance and Racing Products start as low as $14.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 31 extensive product reviews on 1961 Chevrolet P10 Series Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Intake Manifold Bolts with 4.6 stars and Performer RPM Series fuel pump for SBC and W Series Chevy with 3.4 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1961 Chevrolet P10 Series below to get started!
Top-Rated Performance and Racing Products Brands For Your 1961 Chevrolet P10 Series
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1961 Chevrolet P10 Series running right for years to come. In our inventory you’ll find brands like FEL-PRO Performance, Mr. Gasket, Edelbrock, and even more.
Popular Mallory Performance and Racing Products
You’ll find popular Mallory brand products across Performance Ignition Products. All are waiting to get your 1961 Chevrolet P10 Series back on the road. Some of the top-rated Mallory products in these categories are:
Top-Rated FEL-PRO Performance Performance and Racing Products
If FEL-PRO Performance are what you’re looking for, our inventory holds plenty. We stock FEL-PRO Performance brand Performance and Racing Products for your 1961 Chevrolet P10 Series, and some of our most reviewed FEL-PRO Performance parts include:
from
$52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
FAQs for 1961 Chevrolet P10 Series Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1961 Chevrolet P10 Series?
Out of 33 Performance and Racing Products for the 1961 Chevrolet P10 Series, the most popular in our inventory are:
from
$39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
What are the top-rated 1961 Chevrolet P10 Series Performance and Racing Products?
Top-rated Performance and Racing Products for your 1961 Chevrolet P10 Series based on customer reviews/ratings are:
from
$168.99
(5)
Performer RPM Series fuel pump for SBC and W Series Chevy
“Items received quickly, looks like thier 20 years old”
