Name: Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set
Brand: Accel
SKU: 5041R
Price: 94.39 USD
Rating: 4.5 (9 reviews)

from

$94.39

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these Super Stock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms Per Foot Of Resistance
550 Degree F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street/Strip Use
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

from

$54.39

This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:

Increased outer hardened layer thickness (RC 55-60)
Micro Polished Surface For Smooth Contact
Proprietary formulated ductile iron.
Melonite QPQ coated reduces friction and initial wear
Interstitial carbide improves wear resistance/running properties

from

$126.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$16.99

ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$20.05

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
Thermoplastic housing withstands heat stress for enhanced durability
External core made from oriented silicon steel ensures durability and longevity
Stainless steel spring resists corrosion
Tin-plated brass terminals improve electrical contact and protect against corrosion

from

$190.99

ACCEL Performance Replacement Distributors are the perfect choice for your daily driver or street machine. Using all new components, these distributors feature High-performance ACCEL Electronics. All new components-housings are either new castings or turned from billet stock, centerless ground shaft with oil lite bushings. High dielectric strength cap, balanced rotor. Male tower distributor cap with brass cap and rotor contacts (Ford and AMC Models feature screw-mounted wire retainer for the ultimate plug wire retention). Iron or steel distributor gear. Direct plug-in replacement with factory-type connectors for plug and play installation.

Product Features:

Direct Plug In Factory Replacement Plug And Play
CNC Machined 6061 T6 Billet Aluminum Housing
High Dielectric Strenght Thermoplastic Cap With Br
4 Topin Module With Dwell Control Triggers At 75 R
Easy Access Fully Adjustable Mechanical Advance
Adjustable Vacuum Advance
Fit non computerized vehicles
High performance 4 pin module
Steel alloy drive gear compatible with either flat tappet or hydraulic roller camshafts.
All new components

from

$415.99

Ignition Conversion Kit

from

$117.99

For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:

PerTronix 1181 Ignitor Delco 8 cyl
Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.

from

$9.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$8.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$2.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$1.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$338.99

Replacement crank trigger wheel for big block Chevy 8 In. balancer. For a long time racers have known that one of the best things to do to an engine to improve its performance is to stabilize ignition timing. The MSD flying magnetic crank trigger system does exactly that by using four magnets embedded in an aluminum wheel. This is the replacement part for the aluminum crank trigger wheel.

Product Features:

Accurate Trigger Signals
Non-Magnetic Pickup Cannot Be False Triggered
Parts CNC Machined Aluminum In Red Anodized Finish
Wide Range Of Timing Adjustment

from

$290.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$11.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Designed to meet or exceed OE specifications in form, fit and function

from

$9.99

Our best spark plug! Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, the Autolite Iridium XP spark plugs feature an iridium-enhanced 0.6mm finewire design and patented platinum sidewire technology to provide better overall durability and a more focused ignition for enhanced ignitability and performance. Features double Iridium-enhanced alloy technology center electrode for improved durability and wear resistance.

Product Features:

0.6 mm finewire design improves ignitability
Patented V-trimmed platinum sidewire technology resists wear
OE equivalent design is engineered for every engine
Designed for better overall durability with virtually no gap erosion

from

$6.49

With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite delivers exceptional quality. Designed and engineered in the USA, these spark plugs feature platinum-to-platinum firing, virtually eliminating gap erosion and reducing misfires. The OE design and full-platinum tips on both the center and side electrodes optimize engine performance for a longer life and improved fuel economy. The platinum ball welding process ensures a consistent point of contact for enhanced adhesion, while the tapered seat type further contributes to the plug’s superior durability.

Product Features:

Works to optimize engine performance for a longer life and improved fuel economy
OE design
Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
Platinum ball welding process provides a consistent point of contact for enhanced adhesion
Engineered in the USA: Backed by over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite spark plugs are designed and engineered in the USA for exceptional quality and reliability.

from

$41.99

Replacement distributor cap for Flame-Thrower distributors. High dielectric strength cap with male or female brass terminals.

Product Features:

PerTronix D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor
Replacement distributor cap for Flame-Thrower distributors.

from

$24.29

ACDelco Professional Distributor Cap is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket cap is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$158.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$32.49

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$10.99

Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:

PerTronix D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit
These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.

from

$36.99

Product Features:

PerTronix D701700 Vacuum Canister for PerTronix Flame-Thrower Billet Distributor
Replacement Part (only) for PerTronix Flame Thrower Distributors

from

$40.49

NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier

from

$158.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Custom Fit For Make And Model Listed
Wires Are Pre-Cut To Exact Specifications
Bolt-on Performance
Conductor core features DuPont Kevlar material for increased tensile strength
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$72.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$34.49

Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:

High output
Long spark duration
High dielectric strength
Corrosion resistant connections
High reliability
Long service life

from

$35.05

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

Direct-fit OE replacement ensures ease of installation
Designed to meet OE performance
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

1961 Chevrolet K10 Pickup Ignition and Tune-Up Products

More 1961 Chevrolet K10 Pickup Ignition and Tune-Up Products Categories

Essential 1961 Chevrolet K10 Pickup Ignition and Tune-Up Products

Accel – Universal Fit Super Stock 8mm Spiral; Spark Plug Wire Set (Part No.5041R)

MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)

MSD Ignition – Wire Set; Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31249)

ACDelco – Ignition Capacitor (Part No.D204)

Carquest – Contact Set (Points) (Part No.A109V)

Accel – Dist:Chev V8 Hei Vac (Part No.59107)

Carquest Premium – Ignition Conversion Kit (Part No.CBA1799)

PerTronix – High-Performance Electronic Ignition for Delco 8-Cylinder Engines (Part No.1181)

Carquest Premium – Distributor Rotor (Part No.DAA1025)

Carquest – Distributor Rotor (Part No.D152)

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

Felpro – Distributor Mounting Gasket (Part No.12665)

MSD Ignition – Trigger Wheel; Flying Magnet; Big Block Chevy (Part No.8621)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Autolite Iridium – Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition (Part No.XP64)

Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP26)

PerTronix – D650700 Cap Black 8 cylinder Flame-Thrower Billet Distributor (Part No.D650700)

ACDelco – Ignition Distributor Cap (Part No.D308R)

MSD Ignition – Wire Set; Super Conductor; Chevy 366-454; Socket (Part No.31379)

NGK – NGK Wire Set (Part No.51398)

PerTronix – D9011 Flame-Thrower HEI Distributor Counter Clockwise Vacuum Lockout Kit (Part No.D9011)

PerTronix – D701700 Vacuum Canister for Flame-Thrower Billet Distributor (Part No.D701700)

NGK – NGK Wire Set (Part No.51434)

MSD Ignition – Wire Set; Black Super Conductor; Big Block Chevy; Socket (Part No.31373)

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

Carquest – Ignition Coil (Part No.26C1078)

Driveworks – Ignition Coil (Part No.26189)

Popular 1961 Chevrolet K10 Pickup Ignition and Tune-Up Products Categories

1961 Chevrolet K10 Pickup Ignition and Tune-Up Products

Top-Rated Ignition and Tune-Up Products Brands For Your 1961 Chevrolet K10 Pickup

Popular Champion Ignition and Tune-Up Products

Top-Rated Accel Ignition and Tune-Up Products

FAQs for 1961 Chevrolet K10 Pickup Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the 1961 Chevrolet K10 Pickup?

What are the top-rated 1961 Chevrolet K10 Pickup Ignition and Tune-Up Products?