1960 Volvo 445 Belts and Hoses
Find Your Specific 1960 Volvo 445 Belts and Hoses
Below you will find various in-demand Volvo Belts and Hoses, components and accessories for your 1960 445. Advance Auto Parts has popular 445 parts like Serpentine and V Belts, Heater Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other 445 model years including
1956,
1957,
1958,
1959,
1961 and more. Select a category of 1960 Volvo 445 Belts and Hoses below and start saving instantly.
Popular 1960 Volvo 445 Belts and Hoses Categories
Essential Belts and Hoses for 1960 Volvo 445s
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Gates – Premium Molded Coolant Hose (Part No.20782)
from
$21.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28413)
from
$5.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures over prolonged periods, which extends the service life.
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Dayco – Straight Heater Hose; EPDM Rubber, 1 Inch Diameter (sold by foot) (Part No.80319)
from
$4.99
This premium Dayco Insulone Heater Hose delivers heated coolant to the heater core with minimal heat loss. The synthetic EPDM rubber compounds and spiral reinforcement gives this hose excellent burst strength, heat resistance, and compatibility with all common coolants and coolant additives. A special compound used in the insulating layer provides an added measure of protection against heat loss. Built with a black cover, this hose is similar to SAE 20R3, Class D-2 with a temperature range of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Synthetic EPDM rubber compounds and spiral reinforcement provides excellent burst strength and heat resistance
- Compatible with all common coolants and coolant additives
- Insulating layer provides an added measure of protection against heat loss
- Performs well in temperature ranges of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Item is sold and priced by the foot. See store for details.
Dayco – V-Belt, Top Cog, Dayco (Part No.22335)
from
$12.49
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.
Product Features:
See More
Product Features:
- áDesigned for efficient power transmission to vehicle accessories in today’s trucks and buses
- áProvides greater durability and flexibility ┐ 35% stronger than all previous versions
- áFeatures specially treated cords for added strength, stability and reliability
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
Driveworks – Automotive V-Belt, Driveworks (Part No.33013)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (Part No.15330)
from
$14.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Upgrade your 1960 Volvo 445 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 1960 Volvo 445, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volvo or enhancing its overall performance, Belts and Hoses are key to keeping your 445 functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Belts and Hoses for the 1960 Volvo 445, designed to meet your needs without breaking the bank.
From
Serpentine and V Belt
replacements to
Heater Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1960 Volvo 445 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $5.29 to $59.99, with
an average price of $27.60.
Our 7 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 1960 Volvo 445 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Volvo 445, we stock popular OEM and aftermarket Belts and Hoses from top names
like Driveworks Imperial, and more.
Driveworks Belts and Hoses
start at just $5.29 and boast an impressive 4.2 stars average rating from customers.
With 190 customer reviews and counting, our 1960 Volvo 445 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Fluids and Chemicals, Alternators and Starters
and more to make sure your 1960 Volvo 445 is always ready to roll. We’re committed to providing you with everything you need to keep your 445 in top shape, all in one place.
Start shopping confidently below for your 1960 Volvo 445!
Best-Selling Serpentine and V Belts for 1960 Volvo 445s
Enhance the driving experience in your Volvo with 2 quality Serpentine and V Belt components, starting at $5.29.
Driveworks – Automotive V-Belt, Driveworks (Part No.33013)
from
$5.29
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.
Product Features:
See More
Product Features:
- This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
- Polyester cords provide extreme tension-holding capability for longer belt life
- The raw edge belt design delivers the maximum gripping power
- The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
Dayco – Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (Part No.15330)
from
$14.29
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
Most Popular 1960 Volvo 445 Heater Hoses
Customize your Volvo with 1 Heater Hoses products
like Heater Hoses, all
priced under $5.29.
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28413)
from
$5.29
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures over prolonged periods, which extends the service life.
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Top Picks for 1960 Volvo 445 Engine Cooling Hoses
Upgrade Volvo 445s with top-quality Engine Cooling Hoses parts, including 1 OEM and aftermarket selections for your 1960 model.
Gates – Premium Molded Coolant Hose (Part No.20782)
from
$21.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Materials specifically designed to resist collapse under vacuum
- Designed to resist electrochemical degradation, the main cause of casing failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transport applications.
In-Demand Transmission Cooler Hoses for 1960 Volvo 445s
Select from 1 premium Transmission Cooler Hoses parts for your 1960 Volvo 445.
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Most Sold 1960 Volvo 445 Oil Cooler Hoses
Explore our best-selling Volvo parts for the 1960 445 among 2 OEM and aftermarket options starting from $48.99.
Imperial – Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Size: 1/2 in. x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
- Medium duty applications
Imperial – Metal Line Kit for Engine Oil Cooler (Part No.240293)
from
$59.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Used on Chevrolet V8 applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
- Comes with all parts needed for the job
Top-Rated Belts and Hoses Brands For Your 1960 Volvo 445
Shop for the best-rated brands offering Belts and Hoses and other products for your 1960 Volvo 445s. Below you’ll find some of our best rated Belts and Hoses from Driveworks and Imperial, and more. Belts and Hoses from these brands that fit a 1960 445 start at just $5.29 and are rated as high as 4.2 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Driveworks 1960 Volvo 445 Belts and Hoses
When it comes to maintaining or upgrading your 1960 Volvo 445, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Belts and Hoses, specifically designed for the 1960 Volvo 445. With over 1 Driveworks brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.29. Plus, with over 2 customer reviews and an average rating of 4.2 stars, you can trust that our Driveworks Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Imperial 1960 Volvo 445 Belts and Hoses
Imperial auto parts is one of the highest quality Belts and Hose brands in the market. Any 1960 Volvo 445 owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1960 445, Advance Auto Parts carries a full inventory of 1 Imperial Belts and Hoses. Plus you will be keeping your Volvo in peak condition while saving money because prices on these Imperial Belts and Hoses range up to $32.49, plus, with more than 94 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$32.49
(94)
Transmission Oil Cooler Hose
“Great product make sure to get plate mount style other one is pain to mount”
FAQs for 1960 Volvo 445 Belts and Hoses
Which Belts and Hoses are best-sellers for 1960 Volvo 445s?
Out of 7 Belts and Hoses that fit 1960 Volvo 445s, the following parts are the top sellers:
- Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (3300019) – $14.29
- Engine Oil Cooler Hose (19230057) – $48.99
- Metal Line Kit for Engine Oil Cooler (19230068) – $59.99
What’s the price range for 1960 Volvo 445 Belts and Hoses?
Belts and Hose prices for the 1960 Volvo 445 start at $5.29 and go up to $59.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 1960 Volvo 445?
The average price for Belts and Hoses for the 1960 Volvo 445 is $27.60. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Volvo 445 model years?
What are the cheapest Belts and Hoses for my 1960 Volvo 445?
The cheapest 1960 Volvo 445 Belts and Hoses we carry in stock are:
- Safety Stripe Standard Straight Heater Hose (Sold by foot) (10504728) – $5.29
- Automotive V-Belt, Driveworks (5060117) – $5.29
- Bottom Cog V-Belt; 33 Inch Long, Exact Fit Premium Quality (3300019) – $14.29
- Premium Molded Coolant Hose (10511743) – $21.99
- Transmission Oil Cooler Hose (5670022) – $32.49
What are the top-rated Belts and Hoses that fit the 1960 Volvo 445?
Out of 190 reviews by customers, our 1960 Volvo 445 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 1960 Volvo 445 and their top-rated products:
- Serpentine and V Belts
- Automotive V-Belt, Driveworks (5060117) – $5.29
What types of Belts and Hoses do you sell for my 1960 Volvo 445?
As of 3/1/26, these are some of the most in-demand types of Belts and Hoses for a 1960 Volvo 445:
Can I get help with 1960 Volvo 445 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volvo Belts and Hoses and more.
What is your return policy for Volvo 445 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Volvo 445 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
