1960 Jeep CJ6 Performance and Racing Products
Find Your Specific 1960 Jeep CJ6 Performance and Racing Products
Below you will find various in-demand Jeep Performance and Racing Products, components and accessories for your 1960 CJ6. Advance Auto Parts has popular CJ6 parts like Performance Ignition Products, Performance Steering Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other CJ6 model years including
1967,
1968,
1969,
1970,
1971,
1972,
1973,
1974,
1975 and more. Select a category of 1960 Jeep CJ6 Performance and Racing Products below and start saving instantly.
Popular 1960 Jeep CJ6 Performance and Racing Products Categories
Essential Performance and Racing Products for 1960 Jeep CJ6s
Omix – Thermostat Gasket; 134CI F-Head; 52-71 Jeep CJ Models (Part No.17117.02)
from
$4.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Omix – Piston Ring Set Std; AMC; 304CI; 71-75 Jeep CJ Models (Part No.17430.28)
from
$145.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Standard
- OE Style
- Direct Fit
Omix – Oil Pump; 45-71 Willys/Jeep Models (Part No.17433.02)
from
$401.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Metal
- OE Style
- Direct Fit
Omix – Driveshaft U-Joint; 1310 Spicer (Part No.16585.02)
from
$38.49
Are your U-joints making noise? Or has one broken? When they do break, they usually damage the axle shafts or driveshafts too. That’s a lot of unnecessary work and expense. U-joint replacement is a routine maintenance chore.
Product Features:
See More
Product Features:
- Front/Rear
- OE Style
- Direct Fit
Rancho – Steering Damper Bracket (Part No.RS5508)
from
$80.99
Rancho® high-performance steering stabilizers are a simple and affordable way to enhance a vehicle’s performance. Rancho® steering stabilizers are ideal for off – road driving, towing/hauling and street performance applications. Rancho® steering stabilizers are engineered for vehicles with oversized wheels and tires which reduce wheel shimmy, bump steer and vibration. They are available in single and dual configurations with bracket kits available for vehicles without OE mounts. Rancho® steering stabilizers are made with a liquid metallic finish which provides a premium long lasting finish along with a boot that protects the shock rod and oil seal. Rancho® steering stabilizers are covered by our limited lifetime warranty that guarantees your investment. Check our website to find the Rancho® steering stabilizers RS5000¿ part numbers for your vehicle.
Product Features:
See More
Product Features:
- Black powder coated for visual appeal
- CNC cut or bent
- Steel thickness
- Direct bolt to factory steering linkage
- Designed for dual steering stabilizer
Omix – Front Leaf Spring; 10 Leaf; 55-75 Jeep CJ Models (Part No.18201.04)
from
$233.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- 10 Leaf
- Left Or Right Side
- Direct Fit
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Omix – Crankshaft Pulley; 134CI; 41-71 Willys/Jeep Models (Part No.17460.01)
from
$55.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Double Groove
- OE Style
- Direct Fit
Omix – Fuel Filter Kit; 55-86 Jeep CJ Models (Part No.17718.01)
from
$12.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Inline
- OE Style
- Direct Fit
Omix – Distributor Cap; 6 Cylinder; 72-74 Jeep CJ Models (Part No.17244.07)
from
$19.79
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.
Product Features:
See More
Product Features:
- Points Style
- OE Style
- Direct Fit
Omix – Distributor Rotor; 6 Volt; 41-58 Willys/Jeep Models (Part No.17246.01)
from
$9.99
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.
Product Features:
See More
Product Features:
- 6 Volt
- OE Style
- Direct Fit
Omix – Shackle (Part No.18270.12)
from
$35.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Left Hand Thread
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Omix – Fuel Pump; 225CI; 65-66 Jeep CJ Models (Part No.17709.16)
from
$87.99
Has your Jeep left you on the side of the road? There’s not much guessing with a fuel pump. They either work or they don’t. Omix-ADA offers high quality fuel pumps to get you going again.
Product Features:
See More
Product Features:
- Mechanical
- Built To Meet Or Exceed OE Specifications
- OE Style
- Direct Fit
Omix – Valve Cover Gasket; 6 Cylinder; 65-80 Jeep CJ/SJ (Part No.17447.02)
from
$13.29
Is your Jeep’s valve cover gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Cork
- OE Style
- Direct Fit
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$31.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Omix – Distributor Points; 41-71 Willys/Jeep Models (Part No.17243.01)
from
$7.99
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.
Product Features:
See More
Product Features:
- For 134 CI
- OE Style
- Direct Fit
Omix – Piston; .040; 134CI (Part No.17427.04)
from
$88.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.
Product Features:
See More
Product Features:
- .040 Over
- Engine Work May Be Required To Install This Part
Omix – Tie Rod Adjusting Sleeve (Part No.18056.01)
from
$19.29
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Includes Sleeve And Clamps
- OE Style
- Direct Fit
Omix – Thermostat Housing; 134CI F-Head; 52-71 Jeep CJ Models (Part No.17118.01)
from
$10.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Omix – Manual Steering Pitman Arm (Part No.18006.30)
from
$42.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Omix – Camshaft (Part No.17421.07)
from
$175.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.
Product Features:
See More
Product Features:
- Made To OE Spec
- Direct Fit
- Limited 5 Year Warranty
Omix – Body Tub Mounting Kit; 41-75 Willys/Jeep (Part No.12201.01)
from
$271.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
MSD Ignition – Distributor; AMC V8 Engines (Part No.8519)
from
$525.99
There is a big following of AMC enthusiasts that are cruising a 401 equipped Javelin or trail blazing in a rock crawling Jeep with an inline 6-cylinder! MSD offers two Pro-Billet distributors to deliver accurate trigger signals and are maintenance-free! Under the brass terminal cap of each distributor is MSD’s race proven magnetic pick-up. This pick-up never requires adjustment and simply plugs right into an MSD Ignition control. Just above it and under our strong race rotor is an adjustable mechanical advance assembly. The chro-moly weights of this assembly slide on nylon bushings producing smooth movement of the timing. You can easily adjust the curve to match your engine’s requirements with the supplied springs and stop bushings. Each precision CNC-machined billet aluminum housing features a sealed ball-bearing and long sintered bushing for stability at any RPM and increased endurance. An oversized steel shaft receives a QPQ coating to reduce friction and prevent corrosion.
Product Features:
See More
Product Features:
- Designed For Street/Performance Use w/Mech or Vacuum Advance
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- QPQ coated polished steel shaft; guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Vacuum advance canister for improved economy (can be locked out)
Mallory – Unilite Electronic Ignition Distributor Series 37 (Part No.3760001)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Omix – Muffler Exhaust Round; 45-71 Willys/Jeep Models (Part No.17609.02)
from
$109.99
Are you smelling exhaust in your Jeep? Is your exhaust getting louder? If so, your muffler may be bad. Omix-ADA offers high quality replacement mufflers to solve the problem.
Product Features:
See More
Product Features:
- Continuous Roving Fiberglass Filling
- Round
- OE Style
- Direct Fit
Omix – Muffler; 72-78 Jeep CJ Models (Part No.17609.10)
from
$204.99
Are you smelling exhaust in your Jeep? Is your exhaust getting louder? If so, your muffler may be bad. Omix-ADA offers high quality replacement mufflers to solve the problem.
Product Features:
See More
Product Features:
- Continuous Roving Fiberglass Filling
- OE Style
- Direct Fit
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Upgrade your 1960 Jeep CJ6 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Jeep CJ6, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Performance and Racing Products are key to keeping your CJ6 functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Performance and Racing Products for the 1960 Jeep CJ6, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Steering Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1960 Jeep CJ6 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $4.79 to $401.99, with
an average price of $89.64.
Our 35 Performance and Racing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 1960 Jeep CJ6 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Jeep CJ6, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Mallory Omix, and more.
Mallory Performance and Racing Products
start at just $92.99 and boast an impressive 4.9 stars average rating from customers.
With 5 customer reviews and counting, our 1960 Jeep CJ6 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1960 Jeep CJ6 is always ready to roll. We’re committed to providing you with everything you need to keep your CJ6 in top shape, all in one place.
Start shopping confidently below for your 1960 Jeep CJ6!
Best-Selling Performance Ignition Products for 1960 Jeep CJ6s
Enhance the driving experience in your Jeep with 3 quality Performance Ignition Product components, starting at $7.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Omix – Distributor Points; 41-71 Willys/Jeep Models (Part No.17243.01)
from
$7.99
Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.
Product Features:
See More
Product Features:
- For 134 CI
- OE Style
- Direct Fit
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Popular 1960 Jeep CJ6 Performance Steering Products
Customize your Jeep with 5 Performance Steering Products products
like Performance Body Mounts,
Performance Steering Stabilizers, and
Performance Pitman Arms, all
priced under $271.99.
Rancho – Steering Damper Bracket (Part No.RS5508)
from
$80.99
Rancho® high-performance steering stabilizers are a simple and affordable way to enhance a vehicle’s performance. Rancho® steering stabilizers are ideal for off – road driving, towing/hauling and street performance applications. Rancho® steering stabilizers are engineered for vehicles with oversized wheels and tires which reduce wheel shimmy, bump steer and vibration. They are available in single and dual configurations with bracket kits available for vehicles without OE mounts. Rancho® steering stabilizers are made with a liquid metallic finish which provides a premium long lasting finish along with a boot that protects the shock rod and oil seal. Rancho® steering stabilizers are covered by our limited lifetime warranty that guarantees your investment. Check our website to find the Rancho® steering stabilizers RS5000¿ part numbers for your vehicle.
Product Features:
See More
Product Features:
- Black powder coated for visual appeal
- CNC cut or bent
- Steel thickness
- Direct bolt to factory steering linkage
- Designed for dual steering stabilizer
Omix – Body Tub Mounting Kit; 41-75 Willys/Jeep (Part No.12201.01)
from
$271.99
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More
Omix – Manual Steering Pitman Arm (Part No.18006.30)
from
$42.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Omix – Tie Rod End Tube (Part No.18046.03)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Omix – Tie Rod End Tube; Long; RH (Part No.18046.04)
from
$26.49
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.
Product Features:
See More
Product Features:
- Steel
- OE Style
- Direct Fit
Top Picks for 1960 Jeep CJ6 Performance Fuel Systems
Upgrade Jeep CJ6s with top-quality Performance Fuel Systems parts, including 3 OEM and aftermarket selections for your 1960 model.
Omix – Fuel Pump; 134CI; 41-71 Willys/Jeep Models (Part No.17709.02)
from
$181.99
Fuel Pump 134 CI,W/O Vacuum Wipers, Single Action W/O Glass Fuel Bowl,41-45 MB,41-45 GPW,45-49 CJ2A,48-53 CJ3A,53-67 CJ3B,50-52 M38,52-71 M38A1,55-66 CJ5,55-66 CJ6,46-64 Truck,46-64 Station Wagon,48-51 Jeepster.
Product Features:
See More
Product Features:
- Single Action
- Without Glass Bowl
- OE Style
- Direct Fit
Omix – Fuel Filter Kit; 55-86 Jeep CJ Models (Part No.17718.01)
from
$12.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Inline
- OE Style
- Direct Fit
Omix – Fuel Filter Kit; 72-90 Jeep CJ/Wrangler YJ (Part No.17718.02)
from
$8.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Fuel Filter Kit Inline Dual Outlet, Includes: Filter, Clamp and Hoses.
Product Features:
See More
Product Features:
- Inline
- OE Style
- Direct Fit
In-Demand Performance Engines for 1960 Jeep CJ6s
Select from 13 premium Performance Engines parts for your 1960 Jeep CJ6, with prices ranging from $4.79 to $401.99.
Omix – Thermostat 180 Degree; 41-71 Willys/Jeep Models (Part No.17106.02)
from
$8.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Better Flow Control
Omix – Thermostat Housing; 134CI F-Head; 52-71 Jeep CJ Models (Part No.17118.01)
from
$10.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Omix – Thermostat Gasket; 134CI F-Head; 52-71 Jeep CJ Models (Part No.17117.02)
from
$4.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Highly Durable
- Long Lasting
Omix – Oil Pump; 45-71 Willys/Jeep Models (Part No.17433.02)
from
$401.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Metal
- OE Style
- Direct Fit
Omix – Camshaft; 134CI F-Head; 52-71 Jeep CJ Models (Part No.17421.03)
from
$235.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Made To OE Spec
- Direct Fit
Omix – Piston; .020; 134CI (Part No.17427.02)
from
$97.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.
Product Features:
See More
Product Features:
- .020 Over
- Engine Work May Be Required To Install This Part
Omix – Piston; .060; 134CI (Part No.17427.05)
from
$88.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.
Product Features:
See More
Product Features:
- .060 Over
- Engine Work May Be Required To Install This Part
Omix – Piston; .040; 134CI (Part No.17427.04)
from
$88.99
Are you rebuilding an engine and need a fresh set of pistons? Omix-ADA offers high-quality replacement pistons from Standard to .080 thousandths over size. Wrist pins included. They will give you years of service and get you back on the road. Sold individually.
Product Features:
See More
Product Features:
- .040 Over
- Engine Work May Be Required To Install This Part
Omix – Piston Ring Set; .060; 134CI; 41-71 Willys Models (Part No.17430.05)
from
$82.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .060 Over
- Engine Work May Be Required To Install This Part
Omix – Piston Ring Set; .080; 134CI; 41-71 Willys/Jeep Models (Part No.17430.06)
from
$74.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .080 Over
- Engine Work May Be Required To Install This Part
Omix – Piston Ring Set; .020; 134CI; 41-71 Willys/Jeep Models (Part No.17430.02)
from
$73.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .020 Over
- Engine Work May Be Required To Install This Part
Omix – Piston Ring Set (Part No.17430.04)
from
$54.99
Are you rebuilding an engine and need a fresh set of piston rings? Omix-ADA offers high-quality replacement piston ring sets from Standard to .080 thousandths over size. They will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- .040 Over
- Engine Work May Be Required To Install This Part
- Limited 5 Year Warranty
Omix – Engine Tappet Cover Gasket; 134CI; 46-53 Willys CJ Models (Part No.17450.07)
from
$10.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Cork
- OE Style
- Direct Fit
Most Sold 1960 Jeep CJ6 Performance Exhaust Products
Explore our best-selling Jeep parts for the 1960 CJ6 among 1 OEM and aftermarket options starting from $109.99.
Omix – Muffler Exhaust Round; 45-71 Willys/Jeep Models (Part No.17609.02)
from
$109.99
Are you smelling exhaust in your Jeep? Is your exhaust getting louder? If so, your muffler may be bad. Omix-ADA offers high quality replacement mufflers to solve the problem.
Product Features:
See More
Product Features:
- Continuous Roving Fiberglass Filling
- Round
- OE Style
- Direct Fit
Top-Rated Performance and Racing Products Brands For Your 1960 Jeep CJ6
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1960 Jeep CJ6s. Below you’ll find some of our best rated Performance and Racing Products from Mallory and Omix, and more. Performance and Racing Products from these brands that fit a 1960 CJ6 start at just $8.29 and are rated as high as 4.9 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Mallory 1960 Jeep CJ6 Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Jeep CJ6, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Mallory ticks all of those boxes. We offer a wide selection of Mallory Performance and Racing Products, specifically designed for the 1960 Jeep CJ6. With over 1 Mallory brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $92.99. Plus, with over 3 customer reviews and an average rating of 4.9 stars, you can trust that our Mallory Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$92.99
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Popular Omix 1960 Jeep CJ6 Performance and Racing Products
Omix auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1960 Jeep CJ6 owner should feel confident when installing genuine Omix parts in their vehicle. To ensure the best fit and performance for your 1960 CJ6, Advance Auto Parts carries a full inventory of 1 Omix Performance and Racing Products. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Omix Performance and Racing Products range up to $8.29, plus, with more than 2 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$8.29
(2)
Thermostat 180 Degree; 41-71 Willys/Jeep Models
“Product is great. Installing next weekend to my jeep”
FAQs for 1960 Jeep CJ6 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1960 Jeep CJ6s?
Out of 35 Performance and Racing Products that fit 1960 Jeep CJ6s, the following parts are the top sellers:
- Thermocap Radiator Cap (10648773) – $54.99
- Driveshaft U-Joint; 1310 Spicer (10176991) – $38.49
- Steering Damper Bracket (15530238) – $80.99
What’s the price range for 1960 Jeep CJ6 Performance and Racing Products?
Performance and Racing Product prices for the 1960 Jeep CJ6 start at $4.79 and go up to $401.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1960 Jeep CJ6?
The average price for Performance and Racing Products for the 1960 Jeep CJ6 is $89.64. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Jeep CJ6 model years?
What are the cheapest Performance and Racing Products for my 1960 Jeep CJ6?
The cheapest 1960 Jeep CJ6 Performance and Racing Products we carry in stock are:
- Thermostat Gasket; 134CI F-Head; 52-71 Jeep CJ Models (10185210) – $4.79
- Distributor Points; 41-71 Willys/Jeep Models (10180586) – $7.99
- Thermostat 180 Degree; 41-71 Willys/Jeep Models (10186688) – $8.29
- Fuel Filter Kit; 72-90 Jeep CJ/Wrangler YJ (10179191) – $8.99
- Distributor Rotor; 6 Volt; 41-58 Willys/Jeep Models (10181205) – $9.99
What are the top-rated Performance and Racing Products that fit the 1960 Jeep CJ6?
Out of 5 reviews by customers, our 1960 Jeep CJ6 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1960 Jeep CJ6 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
What types of Performance and Racing Products do you sell for my 1960 Jeep CJ6?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1960 Jeep CJ6:
Can I get help with 1960 Jeep CJ6 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Performance and Racing Products and more.
What is your return policy for Jeep CJ6 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Jeep CJ6 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
