1960 Dual-Ghia L6.4 Performance and Racing Products
Find Your Specific 1960 Dual-Ghia L6.4 Performance and Racing Products
Below you will find various in-demand Dual-Ghia Performance and Racing Products, components and accessories for your 1960 L6.4. Advance Auto Parts has popular L6.4 parts like Performance Fuel Systems, Performance Engines, Performance Air Cleaners and more. You’ll also find aftermarket and OEM Performance and Racing Products for other L6.4 model years including
1961,
1962,
1963 and more. Select a category of 1960 Dual-Ghia L6.4 Performance and Racing Products below and start saving instantly.
Popular 1960 Dual-Ghia L6.4 Performance and Racing Products Categories
Essential Performance and Racing Products for 1960 Dual-Ghia L6.4s
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2947 (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XK (Part No.550-510-5XK)
from
$2049.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi Upgrade Kit – Black, 550-511-3AX (Part No.550-511-3AX)
from
$1249.99
Make your classic drive like a modern fuel injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Holley – Holley 4500 Race Carbs, 0-80902HB (Part No.0-80902HB)
from
$1749.99
Each calibration has been dyno and track tested to deliver proven performance!
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80458SA (Part No.0-80458SA)
from
$528.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Holley – Holley 4150 ALUM DP 650 ELECT CHOKE, 0-4777SAE (Part No.0-4777SAE)
from
$699.99
Holley upgraded their two most popular sizes of double pumper with electric chokes. The 650 and 750 CFM models are available in the classic zinc and shiny polished finishes.
See More
Holley – Holley 4150 ALUM DP 750 CFM ELECTRIC CHOKE, 0-4779SAE (Part No.0-4779SAE)
Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit, CL21-602-5 (Part No.CL21-602-5)
from
$465.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Nostalgia Plus 247/254 Hydraulic Flat Cam for Chrysler 383-440, 21-672-4 (Part No.21-672-4)
from
$385.99
Competition Cams Nostalgia Plus 247/254 Hydraulic Flat Cam for Chrysler 383-440, 21-672-4.
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (Part No.1414)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Competition Cams – Competition Cams Xtreme Energy 206/212 Hydraulic Flat Cam, 21-220-4 (Part No.21-220-4)
from
$309.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam, 21-600-5 (Part No.21-600-5)
from
$384.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams High Energy 218/218 Hydraulic Flat Cam, 21-215-4 (Part No.21-215-4)
from
$309.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit, CL21-600-5 (Part No.CL21-600-5)
from
$476.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam and Lifter Kit, CL21-306-4 (Part No.CL21-306-4)
from
$449.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit, K21-223-4 (Part No.K21-223-4)
from
$712.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
See More
Edelbrock – Edelbrock Big-Block Chrysler E-Street Cylinder Heads 84cc, 5093 (Part No.5093)
Edelbrock – Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949 (Part No.77949)
from
$1142.99
Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949.
See More
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
Upgrade your 1960 Dual-Ghia L6.4 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Dual-Ghia L6.4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dual-Ghia or enhancing its overall performance, Performance and Racing Products are key to keeping your L6.4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 77 Performance and Racing Products for the 1960 Dual-Ghia L6.4, designed to meet your needs without breaking the bank.
From
Performance Fuel System
replacements to
Performance Engines
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1960 Dual-Ghia L6.4 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $18.49 to $2,952.00, with
an average price of $1,000.79.
Our 77 Performance and Racing Products in stock come from 6 trusted brands, so you’re sure to find the right part for your 1960 Dual-Ghia L6.4 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Dual-Ghia L6.4, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock Holley, and more.
Edelbrock Performance and Racing Products
start at just $474.99 and boast an impressive 4.4 stars average rating from customers.
With 103 customer reviews and counting, our 1960 Dual-Ghia L6.4 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products
and more to make sure your 1960 Dual-Ghia L6.4 is always ready to roll. We’re committed to providing you with everything you need to keep your L6.4 in top shape, all in one place.
Start shopping confidently below for your 1960 Dual-Ghia L6.4!
Best-Selling Performance Fuel Systems for 1960 Dual-Ghia L6.4s
Enhance the driving experience in your Dual-Ghia with 53 quality Performance Fuel System components, starting at $69.99.
Edelbrock – Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1411)
from
$519.99
“The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow, vacuum secondaries, and single fuel inlet makes it amazingly universal. Add to that an electric choke and this carb is super easy to use on almost anything. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Edelbrock – Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1407)
from
$474.99
“The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-80770 (Part No.0-80770)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street/Strip Carbs, 0-9776 (Part No.0-9776)
from
$659.99
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 adjustable float carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they’re available in your choice of universal or direct fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
See More
Holley – Holley Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80670 (Part No.0-80670)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carbs, 0-80508S (Part No.0-80508S)
from
$539.99
One of the most widely used Holley carbs of all times -the 0-80508S! Its dual feed fuel inlets assure you get all the fuel you need and its 750 CFM of airflow makes it the perfect performance upgrade carb. Its vacuum secondaries and electric choke make it super easy to use on a wide range of vehicles. Don’t trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60’s.
See More
Mr. Gasket – Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (Part No.42S)
from
$69.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part No:12S for V8 gasoline applications, part No:12D for diesel applications or part No:12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!.
See More
Holley – Holley Street Carbs, 0-1850S (Part No.0-1850S)
from
$491.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Edelbrock – Edelbrock Performer 1413 Carburetor: 800 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1413)
from
$590.99
“The Edelbrock 1413 Performer Series 800 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1413 Performer Series 800 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “”hold a tune””, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Dyno tests proved that the EPS 800 carb outperformed a Holley #3310 carb out-of-the-box by 26 ft-lbs. of torque and 22 hp on a small-block Chevy engine equipped with an Edelbrock Performer RPM power package.”
See More
Holley – Holley Prem Street Carbs (Avengers), 0-81670 (Part No.0-81670)
from
$687.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
See More
Holley – Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny, 0-80458SA (Part No.0-80458SA)
from
$528.99
The Street HP uses the best features from Holley’s race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-5XR (Part No.550-511-5XR)
from
$2249.99
The 1 EFI conversion system just got better! Introducing Sniper 2 EFI – a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. We took everything that we learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more.
See More
Sniper Motorsports – Sniper Motorsports Sniper Efi Super Sniper Stealth 1250 – Black, 550-877 (Part No.550-877)
from
$2249.99
If you’re looking to make some big power, the Super Sniper Stealth is made for you! Holley’s Sniper EFI Super Sniper Stealth 1250 is the best way to convert your carbureted engine to fuel injection with just 4 simple connections required. Super Sniper can support up to 1250HP boosted with 8 100 LB/HR Injectors. With a Stealth 1250 system, you get that carburetor styling but the functionality of a Sniper! This 4-barrel system features a single pattern bolt on design built to fit 4150 flange manifolds. The Super Sniper Stealth ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Additionally, this Sniper kit also includes transmission kick down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications!.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XR (Part No.550-510-5XR)
from
$2249.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XR (Part No.550-511-3XR)
from
$2099.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-3XR (Part No.550-510-3XR)
from
$2099.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-5XK (Part No.550-510-5XK)
from
$2049.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-BXR (Part No.550-511-BXR)
from
$1999.99
Make your classic drive like a modern fuel-injected vehicle, including easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley’s comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine and the system will begin self-tuning with no laptop or tuning experience required.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Shiny, 550-510-BXR (Part No.550-510-BXR)
from
$1999.99
If you’re looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI.
See More
Holley – Holley Professional Race Carburetor: 1250 CFM, No Choke, 4 Barrel, 4500 Bore, Dual Inlet, Hard Core Gray, 0-80908HB (Part No.0-80908HB)
from
$1999.99
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!
See More
Sniper Motorsports – Sniper Motorsports Sniper Stealth 4150 Master Kit – Shiny, 550-870K (Part No.550-870K)
from
$1899.99
Holley’s Sniper Stealth 4150 Master Kit gives you carburetor styling but functions just like the Sniper! A 4150 stealth is a great way to upgrade your ride to fuel injection in a cost-efficient way with just 4 simple connections required. Take your build to the next level and take advantage of improved engine performance, better MPG’s and easier starting. This kit supports up to 650hp naturally aspirated and 600hp boosted with Four 100 Lb./Hr injectors!.
See More
Sniper Motorsports – Sniper Motorsports Sniper 2 Efi – Black, 550-511-3XK (Part No.550-511-3XK)
from
$1899.99
New for Sniper 2 is the optional Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12-volt source is all that’s required from your vehicle to power the PDM and your Sniper EFI.
See More
Holley – Holley 4500 Race Carbs, 0-80902HB (Part No.0-80902HB)
from
$1749.99
Each calibration has been dyno and track tested to deliver proven performance!
See More
Most Popular 1960 Dual-Ghia L6.4 Performance Engines
Customize your Dual-Ghia with 21 Performance Engines products
like Performance Engine Intake Manifold Gaskets,
Performance Engine Oil Pan Gaskets, and
Performance Camshaft and Lifter Kits, all
priced under $2,952.00.
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (Part No.1808)
from
$18.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (Part No.1214)
from
$46.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (Part No.1216)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
FEL-PRO Performance – FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2947 (Part No.2947)
from
$48.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
See More
Edelbrock – Edelbrock Big-Block Chrysler E-Street Cylinder Heads 84cc, 5093 (Part No.5093)
Edelbrock – Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949 (Part No.77949)
from
$1142.99
Edelbrock Victor RB/ B Big-Block Chrysler Max Wedge Cylinder Head W/ Valves, 77949.
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam K-Kit for Chrysler 383-440, K21-600-5 (Part No.K21-600-5)
from
$781.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Xtreme Energy 224/230 Hydraulic Flat Cam K-Kit, K21-223-4 (Part No.K21-223-4)
from
$712.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit, CL21-600-5 (Part No.CL21-600-5)
from
$476.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam and Lifter Kit, CL21-602-5 (Part No.CL21-602-5)
from
$465.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam and Lifter Kit, CL21-306-4 (Part No.CL21-306-4)
from
$449.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Big Mutha’ Thumpr 243/257 Hydraulic Flat Cam, 21-602-5 (Part No.21-602-5)
from
$385.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 383-440, 21-670-4 (Part No.21-670-4)
from
$385.99
Competition Cams Nostalgia Plus 233/240 Hydraulic Flat Cam for Chrysler 383-440, 21-670-4.
See More
Competition Cams – Competition Cams Nostalgia Plus 247/254 Hydraulic Flat Cam for Chrysler 383-440, 21-672-4 (Part No.21-672-4)
from
$385.99
Competition Cams Nostalgia Plus 247/254 Hydraulic Flat Cam for Chrysler 383-440, 21-672-4.
See More
Competition Cams – Competition Cams Thumpr 227/241 Hydraulic Flat Cam, 21-600-5 (Part No.21-600-5)
from
$384.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
See More
Competition Cams – Competition Cams Xtreme Energy 230/236 Hydraulic Flat Cam, 21-224-4 (Part No.21-224-4)
from
$309.99
HYDRAULIC – Xtreme Energy: High performance street. Very strong mid-range, headers, 2200+ stall.
See More
Competition Cams – Competition Cams Magnum 224/224 Hydraulic Flat Cam, 21-306-4 (Part No.21-306-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams Magnum 253/253 Hydraulic Flat Cam, 21-243-4 (Part No.21-243-4)
from
$309.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.
See More
Competition Cams – Competition Cams High Energy 218/218 Hydraulic Flat Cam, 21-215-4 (Part No.21-215-4)
from
$309.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
See More
Competition Cams – Competition Cams Xtreme Energy 250/256 Hydraulic Flat Cam, 21-226-4 (Part No.21-226-4)
from
$309.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
See More
Competition Cams – Competition Cams Xtreme Energy 206/212 Hydraulic Flat Cam, 21-220-4 (Part No.21-220-4)
from
$309.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
See More
Top Picks for 1960 Dual-Ghia L6.4 Performance Air Cleaners
Upgrade Dual-Ghia L6.4s with top-quality Performance Air Cleaners parts, including 2 OEM and aftermarket selections for your 1960 model.
Holley – Holley 4150 ALUM DP 750 CFM ELECTRIC CHOKE, 0-4779SAE (Part No.0-4779SAE)
Holley – Holley 4150 ALUM DP 650 ELECT CHOKE, 0-4777SAE (Part No.0-4777SAE)
from
$699.99
Holley upgraded their two most popular sizes of double pumper with electric chokes. The 650 and 750 CFM models are available in the classic zinc and shiny polished finishes.
See More
In-Demand Performance Exhaust Products for 1960 Dual-Ghia L6.4s
Select from 1 premium Performance Exhaust Products parts for your 1960 Dual-Ghia L6.4.
FEL-PRO Performance – FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (Part No.1414)
from
$42.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
Top-Rated Performance and Racing Products Brands For Your 1960 Dual-Ghia L6.4
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1960 Dual-Ghia L6.4s. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock and Holley, and more. Performance and Racing Products from these brands that fit a 1960 L6.4 start at just $474.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1960 Dual-Ghia L6.4 Performance and Racing Products
When it comes to maintaining or upgrading your 1960 Dual-Ghia L6.4, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1960 Dual-Ghia L6.4. With over 2 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $474.99, with an average price of just $497.49. Plus, with over 10 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$519.99
(3)
Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“i put this carb on my dump truck and i couldn’t be more pleased. my truck runs great and has better mpg and increased power”
from
$474.99
(7)
Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
Popular Holley 1960 Dual-Ghia L6.4 Performance and Racing Products
Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1960 Dual-Ghia L6.4 owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1960 L6.4, Advance Auto Parts carries a full inventory of 3 Holley Performance and Racing Products. Plus you will be keeping your Dual-Ghia in peak condition while saving money because prices on these Holley Performance and Racing Products range from $499.99 to $699.99, plus, with more than 49 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$659.99
(2)
Holley Street/Strip Carbs, 0-9776
“REPLACED EXHISTING HOLLEY CARB,LIKE THE PRODUCT LOOKS GOOD ON ENGINE, POLISHED ,EXCELLENT CARBS USED ON OTHER PROJECTS”
from
$699.99
(2)
Holley Prem Street Carbs (Avengers), 0-80770
“This was the carb that my engine builder suggested.”
from
$499.99
(45)
Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S
“Very satisfied”
FAQs for 1960 Dual-Ghia L6.4 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1960 Dual-Ghia L6.4s?
Out of 77 Performance and Racing Products that fit 1960 Dual-Ghia L6.4s, the following parts are the top sellers:
- Mr. Gasket High Performance Electric Fuel Pump – Universal Carbureted Engines, 42S (5400317) – $69.99
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (19781040) – $18.49
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (19781963) – $46.99
What’s the price range for 1960 Dual-Ghia L6.4 Performance and Racing Products?
Performance and Racing Product prices for the 1960 Dual-Ghia L6.4 start at $18.49 and go up to $2,952.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1960 Dual-Ghia L6.4?
The average price for Performance and Racing Products for the 1960 Dual-Ghia L6.4 is $1,000.79. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Dual-Ghia L6.4 model years?
What are the cheapest Performance and Racing Products for my 1960 Dual-Ghia L6.4?
The cheapest 1960 Dual-Ghia L6.4 Performance and Racing Products we carry in stock are:
- FEL-PRO Performance PERFORMANCE OIL PAN GASKET SET, 1808 (19781040) – $18.49
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1216 (19781397) – $29.99
- FEL-PRO Performance Perforated steel core w/anti-stick coating Exhaust Manifold Gasket Set, 1414 (5990947) – $42.99
- FEL-PRO Performance PERFORMANCE INTAKE MANIFOLD GASKET SET, 1214 (19781963) – $46.99
- FEL-PRO Performance PERFORMANCE REAR MAIN SEAL SET, 2947 (20680060) – $48.99
What are the top-rated Performance and Racing Products that fit the 1960 Dual-Ghia L6.4?
Out of 103 reviews by customers, our 1960 Dual-Ghia L6.4 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1960 Dual-Ghia L6.4 and their top-rated products:
- Performance Fuel Systems
- Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (17140004) – $519.99
- Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020557) – $474.99
- Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (6340008) – $499.99
- Performance Engines
- Edelbrock Performer 1411 Carburetor: 750 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (17140004) – $519.99
- Edelbrock Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (5020557) – $474.99
- Holley Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny, 0-80457S (6340008) – $499.99
What types of Performance and Racing Products do you sell for my 1960 Dual-Ghia L6.4?
As of 8/2/26, these are some of the most in-demand types of Performance and Racing Products for a 1960 Dual-Ghia L6.4:
Can I get help with 1960 Dual-Ghia L6.4 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dual-Ghia Performance and Racing Products and more.
What is your return policy for Dual-Ghia L6.4 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Dual-Ghia L6.4 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
