1960 Dodge D300 Series Drivetrains
More 1960 Dodge D300 Series Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1960 Dodge D300 Series, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1960 Dodge D300 Series Drivetrains
Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)
National – Bearings (Part No.25590)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Yukon Gear – Replacement Positraction Internals For Dana 60 And 61 (Full-Floating) With 30 Spline Axles (Part No.16086)
from
$892.99
Yukon replacement positraction internals for Dana 60 and 61 (full-floating) with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 30 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Yukon Gear – Differential (Part No.26037)
from
$941.99
Differential
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)
National – Bearings (Part No.28580)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Pinion Install Kit For Dana 70-HD & Super-70 Differential (Part No.13034)
from
$306.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70HD
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – 8.75" Chrysler Gasket (Part No.23001)
USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)
from
$427.99
Product Features:
See More
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.56 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Billet Replacement Yoke For Dana 60 And 70 With 29 Spline Pinion And A 1350 U/Joint Size (Part No.41138)
from
$396.99
Yukon billet replacement yoke for Dana 60 and 70 with 29 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)
from
$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 60, 70 and 80
- 3/8″
Yukon Gear – Replacement Baffle For Dana 70 & 70HD (Part No.33003)
Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)
from
$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Redi-Sleeve yoke saver
- Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
Yukon Gear – Spindle Nut Retainer, 2.030" I.D., 8 Bent Over TABS (Part No.33480)
from
$8.99
Spindle nut retainer, 2.030″ I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 2.030″ I.D.
- 8 bent over tabs
Yukon Gear – Full-Floating, Blank 35 Spline Diameter, Non-Drilled Axle Shaft For Dana 60 (Part No.21005)
from
$279.99
Full-floating, 35 spline diameter, non-drilled blank axle shaft for Dana 60. 40″ inches long. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.
See More
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$56.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – 7260 U/Joint Strap, Small Chrysler With Bolts, 7.25, 8.25, 8.75, 9.25 (Part No.41192)
from
$42.99
7260 U/joint strap, Small Chrysler w/ bolts, 7.25, 8.25, 8.75, 9.25.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Chrysler 7.25″, 8.25″ 8.75″ and 9.25″ rear
- 7260 u-joint size
- Includes two straps and four bolts
Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)
from
$7.99
Dana 60 & Dana 70 Power Lok case bolt.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 60 and 70
- 7/16 x 14 thread
- 3.5″ long
- 9/16″ hex head
Yukon Gear – Pinion Nut (Part No.33142)
from
$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.
Product Features:
See More
Product Features:
- Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
- 7/8″ x 14 thread
Yukon Gear – Replacement Trac Loc Carrier Case, Dana 60, 4.10 & Down (Part No.20043)
from
$481.99
Product Features:
See More
- Trac Loc positraction carrier case
- Does not include spider gears
- Fits Dana Spicer 60
- 4.10 and down ratio only
- ABS and non-ABS compatible
Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)
from
$8.99
Product Features:
See More
- Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
- For Trac Loc positraction applications only
Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)
from
$4.99
Product Features:
See More
- Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
- Fits standard open differentials only
Felpro – DIFFERENTIAL GASKET (Part No.RDS 6095-1)
from
$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
Popular 1960 Dodge D300 Series Drivetrains Categories
1960 Dodge D300 Series Drivetrains
You count on your 1960 Dodge D300 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 251 Drivetrains ranging in price from $3.49 to $1,487.99, you’re sure to find everything you need for your 1960 Dodge D300 Series.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like National, Yukon Gear, and Anchor. 1960 Dodge D300 Series Drivetrains start as low as $3.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 651 extensive product reviews on 1960 Dodge D300 Series Drivetrains. Some of the top-rated Drivetrains products we carry are DIFFERENTIAL GASKET with 3.0 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1960 Dodge D300 Series below to get started!
Top-Rated Drivetrains Brands For Your 1960 Dodge D300 Series
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1960 Dodge D300 Series running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, Anchor, and even more.
Popular Dorman Drivetrains
You’ll find popular Dorman brand products across Spindles. All are waiting to get your 1960 Dodge D300 Series back on the road. Some of the top-rated Dorman products in these categories are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
Top-Rated National Drivetrains
If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1960 Dodge D300 Series, and some of our most reviewed National parts include:
FAQs for 1960 Dodge D300 Series Drivetrains
What are the most purchased Drivetrains for the 1960 Dodge D300 Series?
Out of 251 Drivetrains for the 1960 Dodge D300 Series, the most popular in our inventory are:
What are the top-rated 1960 Dodge D300 Series Drivetrains?
Top-rated Drivetrains for your 1960 Dodge D300 Series based on customer reviews/ratings are:
