1960 Dodge D200 Series Differentials

Find your specific 1960 Dodge D200 Series original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1960 Dodge D200 Series Differentials

from

$209.99

Product Features:

Fits Chrysler 9.25″ rear with open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$16.49

TAPERED ROLLER BEARI

from

$52.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Dana Spicer 60
Works with Spartan Locker or standard open spider gears

from

$13.99

Product Features:

PINION SHIM – DANA 70 ALL

from

$369.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Dana Spicer 60 rear
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , oil baffles and slingers , marking compound and brush.

from

$414.99

Yukon Performance steel spool for Dana 60 with 35 spline axles. fits 4.10 and down. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:

Fits Chrysler Dana Spicer 60 with 35 spline axles
4.10 and down ratio only
Provides 100% traction to both wheels at all times
Not recommended for street driven vehicles

from

$15.99

Crush Sleeve for Chrysler 8″ & 9.25″ rear. Approx 0.630″ long.

Product Features:

Crush sleeve for Chrysler 8.0″ IFS and 9.25″ rear, also Ford 9″ with aftermarket Daytona pinion support
0.630″ tall

from

$313.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$312.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Chrysler 8.75″ ’89’ case housing with LM104912 carrier races
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$79.99

Seal housing for Dana 60, Zip locker, with o-rings.

Product Features:

Seal housing for Dana Spicer 60
Includes o-rings

from

$7.99

Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:

Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8″ x 14 thread
1 5/16″ socket

from

$104.99

Product Features:

Carrier shims for Dana Spicer 60 and 70U

from

$939.99

Differential

from

$6.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$4.99

Product Features:

Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
Fits standard open differentials only

from

$6.99

Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:

Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS

from

$18.99

Product Features:

Bulkhead quit connect fitting

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$684.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$289.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Chrysler 8.75″ ’89’ case
Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$599.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits standard rotation Dana Spicer 60
9.75″ ring gear diameter
29 spline pinion
12 ring gear bolts
7.17 ratio

from

$15.99

Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:

Side adjuster lock bolt
Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$832.99

Yukon replacement positraction internals for Dana 60 and 70 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Clutch kit
Fit Dana Spicer 60 Powr Lok positraction with 35 spline axles
Smooth design
Includes two side gears, four pinion gears, cross pin shafts and side gear thrust washers.

from

$6.99

Product Features:

Oil baffle for Dana Spicer 60 and Dana Spicer 70U

from

$59.99

RngPnnInstlKt

from

$8.99

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44 and Dana Spicer 60
For Trac Loc positraction applications only

Popular 1960 Dodge D200 Series Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Automatic Transmission Differential Carrier Gaskets

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Maybe you’re in the middle of a full rebuild of that 1960 Dodge D200 Series. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 153 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1960 Dodge D200 Series running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1960 Dodge D200 Series. Yukon Gear, National, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1960 Dodge D200 Series, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 52 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Bearings with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1960 Dodge D200 Series rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1960 Dodge D200 Series Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1960 Dodge D200 Series demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your D200 Series the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Driveworks Differentials

We carry Driveworks parts in our stock across Differential Bearings categories, plus more. For a 1960 Dodge D200 Series, our most popular Driveworks Differentials include:

from $8.49

(7)

Tapered Roller Bearing

Differential Bearings

FAQs for 1960 Dodge D200 Series Differentials

What are the most purchased Differentials for the 1960 Dodge D200 Series?

Out of 153 Differentials for the 1960 Dodge D200 Series, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $8.99

This product is not rated

Bearings

Differential Bearings

from $5.99

This product is not rated

Dana 60, Dana 70 & Dana 80 Cover Bolt

Differential Cover Bolts

What are the top-rated 1960 Dodge D200 Series Differentials?

Top-rated Differentials for your 1960 Dodge D200 Series based on customer reviews/ratings are:

from $38.49

(2)

Bearings

“nice finish and function. Should perform well.”

from $20.99

(2)

Bearings

“this is not a front wheel bearing”

from $6.49

(1)

Differential Carrier Gasket

“It just what i needed for my 74 cuda rear end house which is 8 3/4”

1960 Dodge D200 Series Differentials

More 1960 Dodge D200 Series Differentials

Essential 1960 Dodge D200 Series Differentials

USA Standard Gear – Open Spider Gear Set For Chrysler 9.25", 31 Spline (Part No.39004)

FAG US – TAPERED ROLLER BEARI (Part No.KT5)

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 60 (Part No.17019)

Motive Gear – Differential Pinion Shim Kit (Part No.1111)

Yukon Gear – Bearing Install Kit For Dana 60 Rear Differential (Part No.11031)

Yukon Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.10 & Down (Part No.32042)

Yukon Gear – Crush Sleeve (Part No.33094)

Dorman – Differential Pinion Yoke Assembly (Part No.697-545)

USA Standard Gear – Master Overhaul Kit For Chrysler 8.75" #89 Housing With LM104912/49 Carrier Bearings (Part No.37091)

Yukon Gear – Seal Housing For Dana 60, Zip Locker, With O-Rings (Part No.34039)

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)

Yukon Gear – Differential (Part No.26040)

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Yukon Gear – Cross Pin Bolt (Part No.33067)

Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Powertrax – Grip LOK Traction System (Part No.LK436035)

Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#89) Differential (Part No.13007)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 60 In A 7.17 Ratio (Part No.24308)

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Replacement Positraction Internals For Dana 60 And 70 With 35 Spline Axles (Part No.16008)

Yukon Gear – Replacement Baffle For Dana 60 & Dana 70-U (Part No.33001)

Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)

Yukon Gear – Chrysler 9.25" And Dana 44 / 60 Tracloc Clutch Guide Replacement (Part No.33249)

Popular 1960 Dodge D200 Series Differentials Categories