1960 Chevrolet El Camino Performance Intake Manifolds
Enhance and Protect Your 1960 Chevrolet El Camino with Quality Performance Intake Manifolds
Maintaining the performance of your 1960 Chevrolet El Camino starts with choosing the right parts, and high-quality Performance Intake Manifolds help ensure a reliable and efficient vehicle. At Advance Auto Parts, we offer Performance Intake Manifolds specifically for the 1960 Chevrolet El Camino, ensuring a perfect fit and lasting durability. Choosing to shop with Advance Auto Parts means you’re making a smart decision to prioritize both quality and reliability for your vehicle.
Affordable and Reliable Performance Intake Manifolds for Every Budget
Finding affordable, quality Performance Intake Manifolds is easy at Advance Auto Parts. With prices starting as low as $257.99 and an average price of $428.55, you can choose one that fits your budget while delivering the quality you expect. Our Performance Intake Manifolds are competitively priced, ranging from $257.99 to $713.99, so you get value without compromising on strength or reliability.
Explore Related Parts for a Complete Solution
To further enhance your 1960 Chevrolet El Camino, don’t miss our related parts categories, including Performance Engine Dress-Up Kits and Performance Engine Water Pumps. These additions will round out your repair or upgrade project and ensure your vehicle is ready for any adventure.
Performance Intake Manifolds for Your 1960 Chevrolet El Camino
Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)
from
$257.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Edelbrock – Performer RPM Small Block Chevy AIR-Gap Intake Manifold (Part No.7501)
from
$356.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake
- For Square Bore Carburetors Only
Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)
from
$339.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes and Accepts EGR
Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)
from
$322.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Satin Finish
- Non-EGR W/ Oil Fill Tube
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Polished Intake Manifold (Part No.75011)
from
$713.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Dual-plane high-rise intake. For square bore carburetors only. For street and high performance use. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Polished Version Of Edelbrock PN[7501]
- Polish is Hand-Buffed for Brilliant Shine
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – C357-B Three-Deuce Intake Manifold #54191 1964-1983 Small-Block Chevy, Polished (Part No.54191)
from
$608.99Product Features:
- Polished PN[54191] Hand-Buffed for Brilliant Shine
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.21011)
from
$566.99
Edelbrock part #21011 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle respons
See More
Edelbrock – RPM AIR-Gap Dual-Quad Small Block Chevy Endurashine Intake Manifold (Part No.75254)
from
$536.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Finish-Bright Silver Chrome That Will Not Discolor
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Edelbrock – C-357-B Triple-Deuce Intake Manifold for 1955-86 262-400 c.i.d. SB Chevys (Part No.5418)
from
$514.99
Edelbrock part #5418 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excelle
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type 6-Pack Style Flange
- 3.77 in. Front Height, 4.35 in. Center Height, 4.88 in. Rear Height
- Satin Finish
- Non-EGR
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)
from
$504.99Product Features:
- Polished Version Of Edelbrock PN[2701]
- Polish is Hand-Buffed for Brilliant Shine
- Maximizes Performance with Edelbrock Carburetors
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)
from
$473.99
Product Features:
See More
- Designed for Idle to 5500 RPM
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)
from
$445.99
Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Black Powder Coated Finish
- Non-EGR W/ Oil Fill Tube
Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3706)
from
$381.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes and Accepts EGR
Weiand – Stealth; Intake Manifold (Part No.8150P)
from
$371.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish (Part No.27013)
from
$360.99
Edelbrock part #27013 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Weiand – Action +Plus; Intake Manifold (Part No.8120P)
from
$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Holley – Strip Dominator; Intake Manifold (Part No.300-25)
from
$343.99
Strip Dominator intake manifold square bore carburetor mounting flange. Single plane with isolated plenum. Isolated water cross-over.
Product Features:
See More
Product Features:
- Single Plane With Isolated Plenum
- Square Bore Carburetor Mounting Flange
- Isolated Water Cross-Over
- Power Band 4500-7600 rpm
- Height Front 5.11 in. Rear 5.97 in.
- Port Size 2.05 in. Height 1.22 in. Width
- No Exhaust Heat Crossover Provision
- Ideal For Drag Cars w/Auto Trans.
Weiand – X-CELerator; Intake Manifold (Part No.7547-1)
from
$259.99Product Features:
- 2000-6500 RPM Power Band
- Single Plane/Open Plenum Design
- No Provision For Divorced Or Hot Air Choke
- Square Flange Carburetor Mounting
FAQs for 1960 Chevrolet El Camino Performance Intake Manifolds
Which Performance Intake Manifolds are the top sellers for the 1960 Chevrolet El Camino?
Out of 18 Performance Intake Manifolds that fit 1960 Chevrolet El Caminos, the following parts are the top sellers:
from
$257.99
(3)
Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish
Performance Intake Manifolds
from
$356.99
This product is not rated
Performer RPM Small Block Chevy AIR-Gap Intake Manifold
Performance Intake Manifolds
from
$339.99
This product is not rated
Performer Small-Block Chevy Intake Manifold for Street Performance
Performance Intake Manifolds
How can I make sure that a part will be compatible with my 1960 Chevrolet El Camino?
Our Chevrolet El Camino aftermarket and OEM parts are designed specifically for the 1960 model. You can always find your specific fitment and compatibility for your 1960 Chevrolet on an individual product page.
What is the price range for 1960 Chevrolet El Camino Performance Intake Manifolds?
The range of prices of Performance Intake Manifolds for the 1960 Chevrolet El Camino goes from $257.99 up to $713.99 for the most premium parts.
What is the average price of 1960 Chevrolet El Camino Performance Intake Manifolds?
1960 Chevrolet El Camino Performance Intake Manifolds average $428.55 for our selection of OEM and aftermarket parts.
Does Advance Auto Parts sell Performance Intake Manifolds for other Chevrolet El Camino model years?
Can I get help with 1960 Chevrolet El Camino Performance Intake Manifolds orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance Intake Manifolds and more.
What is your return policy for Chevrolet El Camino Performance Intake Manifolds?
Advance Auto Parts keeps returns simple. For new Chevrolet El Camino Performance Intake Manifolds and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
Performance Intake Manifolds For Other Chevrolet El Camino Model Years
Looking for parts for a different model year of the Chevrolet El Camino? Below, you’ll find links to Performance Intake Manifolds for a range of model years, from 1959 models all the way up to 1987. At Advance Auto Parts, we carry high-quality OEM and aftermarket auto parts for popular years like 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, and more, ensuring you have access to the best options for your specific needs. Choosing a Performance Intake Manifolds from Advance Auto Parts means investing in top-tier parts that will keep your Chevrolet El Camino running at its best, no matter the year.
