1960 Chevrolet El Camino Drivetrains

Essential Drivetrains for 1960 Chevrolet El Caminos

Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)

1350 To 1410 Conversion U/Joint

from

$78.99
Yukon 1350 to 1410 conversion u/joint.
See More

Motive Gear – Differential Ring and Pinion (Part No.GM7.5-456)

Differential Ring and Pinion

from

$216.99


Product Features:
  • GM 10BL 7.5&7.625 R/P 4.56 MG
See More

National – Multi Purpose Bearing (Part No.HB-206-FF)

Multi Purpose Bearing

from

$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.4RMK)

Differential Master Bearing Kit - Koyo

from

$137.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • MASTER KIT, GM 10 BOLT CAR ’55-64
See More

Yukon Gear – Minor Install Kit For GM 8.5" Rear Differential (Part No.12055)

Minor Install Kit For GM 8.5" Rear Differential

from

$48.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (includes Supershims)

Product Features:
  • Fits GM 8.5″ rear
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Pro-King – Differential Bearing Cone (Part No.742G255)

Differential Bearing Cone

from

$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Yukon Gear – 3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More (Part No.33347)

3/8" Ring Gear Bolt Washer For GM 12 Bolt Car & Truck, 8.2 Bop & More

from

$4.99
3/8″ ring gear bolt washer for GM 12 bolt car & truck, 8.2 BOP & more.

Product Features:
  • Ring gear bolt washer for GM 12 bolt car and truck, 1955-1964 passenger car, 1963-1979 Corvette and 8.2″ Buick, Oldsmobile and Pontiac
See More

Pro-King – Differential Pinion Gear Washer (Part No.742G216)

Differential Pinion Gear Washer

from

$2.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Driveworks – Oil Seal Kit (Part No.S-5200)

Oil Seal Kit

from

$6.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2002
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 3.50 INCH / 89 MM
  • MOUNT WIDTH: 1.50 INCH / 38 MM
  • COMPLETE MOUNT
See More

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Pinion Install Kit For GM 8.5" Differential (Part No.13069)

Pinion Install Kit For GM 8.5" Differential

from

$173.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.5″ rear
  • Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
See More

USA Standard Gear – Spartan Locker For GM 12 Bolt Car & Truck With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17032)

Spartan Locker For GM 12 Bolt Car & Truck With 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$672.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits GM 12 bolt car and truck with 30 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Yukon Gear – Billet Yoke For GM 12P And 12T With A 1350 U/Joint Size (Part No.41154)

Billet Yoke For GM 12P And 12T With A 1350 U/Joint Size

from

$359.99
Yukon billet yoke for GM 12P and 12T with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 12 bolt passenger car and truck
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Mr. Gasket – Differential Gasket (Part No.84)

Differential Gasket

from

$21.79
Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1970 Buick, Olds, Pontiac, 10 bolt 8.20 inch ring gear.

Product Features:
  • .047″ thick cellulose/nitrile composite gasket material
  • Precision die cut
  • Reusable
See More

Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)

Axle Seal, For 1559 Or 6408 Bearing

from

$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • 2.530″ O.D.
See More

Powertrax – No-Slip Traction System (Part No.9207822805)

No-Slip Traction System

from

$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    National – Shaft Repair Sleeve (Part No.99199)

    Shaft Repair Sleeve

    from

    $37.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5" (Part No.55001)

    Super Carrier Shim Kit For Ford 7.5", GM 7.5", 8.2" & 8.5"

    from

    $59.99
    Product Features:
    • Super carrier shim kit for Ford 7.5″, GM 7.5″, 7.625″, 7.6″ IFS, 7.6″ IRS, 7.75″, 8.2″, 8.2″ Buick, Oldsmobile and Pontiac and GM 8.5″ front and rear
    • Interlocking design makes installation much easier
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 11724)

    Differential Carrier Gasket

    from

    $5.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Driveworks – Oil Seal (Part No.S-2043)

    Oil Seal

    from

    $7.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Standard Open Side Gear Thrust Washer For 8.5" GM (Part No.33304)

    Standard Open Side Gear Thrust Washer For 8.5" GM

    from

    $15.99
    Standard open side gear thrust washer for 8.5″ GM.

    Product Features:
    • Side gear thrust washer
    • Fits GM 8.5″
    See More

    National – Bearings (Part No.1308-L)

    Bearings

    from

    $110.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – Ring Gear Bolt (Part No.33049)

    Ring Gear Bolt

    from

    $6.99
    Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

    Product Features:
    • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
    • 7/16″ x 20
    See More

    Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)

    Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck

    from

    $39.99
    8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.

    Product Features:
    • Pinion depth shim kit for Toyota 7.5″, 8″ and V6
    See More

    Upgrade your 1960 Chevrolet El Camino with Top-Quality Drivetrains

    When it comes to maintaining or upgrading your 1960 Chevrolet El Camino, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your El Camino functioning at its best. At Advance Auto Parts, we offer a wide selection of 82 Drivetrains for the 1960 Chevrolet El Camino, designed to meet your needs without breaking the bank. From Differential replacements to Transfer Cases upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1960 Chevrolet El Camino at great prices. Our Drivetrains inventory for this model ranges from just $4.49 to $1,566.99, with an average price of $171.77. Our 82 Drivetrains in stock come from 13 trusted brands, so you’re sure to find the right part for your 1960 Chevrolet El Camino without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Chevrolet El Camino, we stock popular OEM and aftermarket Drivetrains from top names like Valvoline National, and more. Valvoline Drivetrains start at just $14.49 and boast an impressive 5 stars average rating from customers. With 137 customer reviews and counting, our 1960 Chevrolet El Camino Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1960 Chevrolet El Camino is always ready to roll. We’re committed to providing you with everything you need to keep your El Camino in top shape, all in one place. Start shopping confidently below for your 1960 Chevrolet El Camino!

    Best-Selling Differentials for 1960 Chevrolet El Caminos

    Enhance the driving experience in your Chevrolet with 62 quality Differential components, starting at $4.99.

    Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    from

    $14.49
    Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.

    Product Features:
    • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Valvoline – DEX/MERC Automatic Transmission Fluid, 1 Gallon (Part No.773636)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    from

    $35.99
    Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

    Product Features:
    • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
    • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
    • Developed with anti-wear technology to help improve transmission durability
    • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
    See More

    Felpro – Differential Carrier Gasket (Part No.RDS 11724)

    Differential Carrier Gasket

    from

    $5.29
    Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

    Product Features:
    • Meets or exceeds all original equipment specifications
    • Application specific design to ensure a perfect fit
    • Unsurpassed quality you can trust
    • Validated for fit, form and function
    • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
    See More

    Motive Gear – Differential Bearing Kit – Timken (Part No.R8.4RT)

    Differential Bearing Kit - Timken

    from

    $160.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • KIT BRG & SEAL ’55-64 CHEVY
    See More

    National – Bearings (Part No.HM89449)

    Bearings

    from

    $25.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Multi Purpose Seal (Part No.6818)

    Multi Purpose Seal

    from

    $21.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

    3 Qt - 80W90 Conventional Gear Oil With Posi Additive

    from

    $57.99
    3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

    Product Features:
    • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
    See More

    National – Bearings (Part No.LM603049)

    Bearings

    from

    $12.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM88510)

    Bearings

    from

    $14.29
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    National – Bearings (Part No.HM89410)

    Bearings

    from

    $11.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Motive Gear – Differential Pinion Shim Kit (Part No.1104)

    Differential Pinion Shim Kit

    from

    $12.99


    Product Features:
    • KIT SHIM
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

    Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

    from

    $148.99
    Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

    Redline Synthetic "Shock Proof" Oil - 3 Quarts

    from

    $99.99
    Redline Synthetic “Shock Proof” Oil. 3 Quarts.

    Product Features:
    • Includes three quarts of Redline Shockproof oil
    See More

    Yukon Gear – Crush Sleeve (Part No.33101)

    Crush Sleeve

    from

    $13.99
    Crush Sleeve for GM 55-62 car & truck and Toyota 8″. 2.510″ long.

    Product Features:
    • Crush sleeve for 1955-1962 GM passenger car and Toyota 8″ with 4 cylinder engine
    • 2.510″ tall
    See More

    Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

    Redline Synthetic "Shock Proof" Oil - 4 Quarts

    from

    $137.99
    Redline Synthetic “Shock Proof” Oil. 4 Quarts.

    Product Features:
    • Includes four quarts of Redline Shockproof oil
    See More

    Yukon Gear – Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck (Part No.55008)

    Pinion Depth Shims For GM 7.5", 7.75", 8.2" & 12 Bolt Truck

    from

    $21.99
    Product Features:
    • Pinion depth shims for GM 7.5″, 7.625″, 7.6 IFS, 7.6 IRS, 7.75″, 8.2″, 1955-1964 passenger car and 12 bolt car and truck
    See More

    Yukon Gear – Chevy ’55-’64 Car And Truck Dropout Gasket (Part No.23017)

    Chevy '55-'64 Car And Truck Dropout Gasket

    from

    $13.99
    55P Chevy Passenger Drop Out gasket.

    Product Features:
    • Cover gasket
    • Fits 1955-1964 GM passenger car
    See More

    Motive Gear – Differential Pinion Seal (Part No.6818)

    Differential Pinion Seal

    from

    $8.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
    See More

    National – Shaft Repair Sleeve (Part No.99170)

    Shaft Repair Sleeve

    from

    $38.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Yukon Gear – Dana 44 Pinion Gear Thrust Washer (Part No.33281)

    Dana 44 Pinion Gear Thrust Washer

    from

    $4.99
    Dana 44, GM55P & 8.2″ GM pinion gear Thrust washer.

    Product Features:
    • Pinion gear thrust washer for Dana Spicer 44, GM 8.2″ and 1955-1964 GM passenger car
    See More

    Powertrax – Lock Right Locker (Part No.1940-LR)

    Lock Right Locker

    from

    $441.99
    The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    USA Standard Gear – Master Overhaul Kit for GM Chevy 55P and 55T Differential (Part No.37047)

    Master Overhaul Kit for GM Chevy 55P and 55T Differential

    from

    $243.99
    USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

    Product Features:
    • Fits 1955-1964 GM passenger car and truck
    • Uses Koyo bearings and races
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
    See More

    Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.4R)

    Differential Bearing Kit - Koyo

    from

    $119.99
    Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

    Product Features:
    • BRG & SEAL KIT ’55-’64 CHEV 8.4 DROP OUT STYLE
    See More

    Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)

    12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver

    from

    $109.99
    12P, 12T, CI VET, & 55GM 8460N REDI sleeve yoke saver.Yukon Mighty seal.

    Product Features:
    • Pinion Redi-sleeve
    • Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
    See More

    ARP Auto Racing – For Use With General Motors, 0.800" Head L, 3/8" – 24 Thread Size, Chrome Moly (Part No.230-3001)

    For Use With General Motors, 0.800"  Head L, 3/8" - 24 Thread Size, Chrome Moly

    from

    $37.99
    The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

    Product Features:
    • Forged From Premium Grade 8740 Chrome Moly Steel
    • Heat Treated
    • Nominally Rated At 200,000 Psi Tensile Strength
    • Specially Hardened, Precision Ground Washers
    • 3/8″-24 RH Thread Size
    • 0.8″ Underhead Length
    • 200,000 PSI
    See More

    Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

    Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

    from

    $26.99
    Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

    Product Features:
    • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
    • Left hand thread
    See More

    National – Bearings (Part No.LM603014)

    Bearings

    from

    $19.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Crowned raceways and rollers to ensure even load distribution for maximum life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

    Tapered Roller Bearing

    from

    $4.99
    Product Features:
    • Brand may vary by location
    See More

    Yukon Gear – Minor Install Kit For GM Chevy 55P And 55T Differential (Part No.12047)

    Minor Install Kit For GM Chevy 55P And 55T Differential

    from

    $73.99
    Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

    Product Features:
    • Fits 1955-1964 GM truck and passenger car
    • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
    See More

    Yukon Gear – Side Gear Thrust Washer For GM 8.2" & 55P (Part No.33529)

    Side Gear Thrust Washer For GM 8.2" & 55P

    from

    $10.99
    Product Features:
    • Side gear thrust washer for GM 8.2″ and 1955-1964 GM passenger car
    • Fits standard open differentials only
    See More

    Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

    Bearing Race Driver Set, 21 Piece

    from

    $1566.99
    21 Piece bearing race driver set. (Box wt: 140lbs) No return.

    Product Features:
    • Bearing race driver set
    • 21 pieces
    • All steel construction
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56034)

    The Carrier Bearing Puller

    from

    $689.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.55 Ratio (Part No.24142)

    High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.55 Ratio

    from

    $579.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. ** Note: This gear set is not compatible with a factory 3.08 carrier**

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.55 ratio
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.36 Ratio (Part No.24467)

    High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.36 Ratio

    from

    $579.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a strong gear that is easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. ** Note: This gear set is not compatible with a factory 3.08 carrier**

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.36 ratio
    See More

    Powertrax – No-Slip Traction System (Part No.9207822805)

    No-Slip Traction System

    from

    $544.99
    For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.Powertrax® = Extreme Traction Systems!
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.73 Ratio (Part No.24143)

    High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.73 Ratio

    from

    $529.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. ** Note: This gear set is not compatible with a factory 3.08 carrier**

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.73 ratio
    See More

    Yukon Gear – High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.08 Ratio (Part No.24141)

    High Performance Ring & Pinion Gear Set For GM Chevy 55P In A 3.08 Ratio

    from

    $449.99
    Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.08 ratio
    See More

    Richmond Gear – RngPnn (Part No.49-0052-1)

    RngPnn

    from

    $436.99
    RngPnn

    USA Standard Gear – Ring & Pinion Gear Set For GM Chevy 55P In A 3.08 Ratio (Part No.36189)

    Ring & Pinion Gear Set For GM Chevy 55P In A 3.08 Ratio

    from

    $419.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.08 ratio
    See More

    USA Standard Gear – Ring & Pinion Gear Set For GM Chevy 55P In A 3.73 Ratio (Part No.36191)

    Ring & Pinion Gear Set For GM Chevy 55P In A 3.73 Ratio

    from

    $419.99
    USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

    Product Features:
    • Fits 1955-1964 GM passenger car
    • 8.40″ ring gear diameter
    • 17 spline pinion
    • 10 ring gear bolts
    • 3.73 ratio
    See More

    Yukon Gear – Master Overhaul Kit For GM Chevy 55P And 55T Differential (Part No.14073)

    Master Overhaul Kit For GM Chevy 55P And 55T Differential

    from

    $369.99
    Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

    Product Features:
    • Fits 1955-1964 GM passenger car and truck
    • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
    See More

    Yukon Gear – Bearing Install Kit For ’55-’64 GM Chevy Passenger Differential (Part No.11058)

    Bearing Install Kit For '55-'64 GM Chevy Passenger Differential

    from

    $304.99
    Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

    Product Features:
    • Fits 1955-1964 GM passenger car and truck
    • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
    See More

    Yukon Gear – Pinion Install Kit For GM 55P And 55T Differential (Part No.13060)

    Pinion Install Kit For GM 55P And 55T Differential

    from

    $276.99
    Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

    Product Features:
    • Fits 1955-1964 GM truck and passenger car
    • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
    See More

    Yukon Gear – 8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi (Part No.16148)

    8.75" Chrysler & 55P Chevy Power Lok Clutches, Model 20 Also, Posi

    from

    $275.99
    8.75″ Chrysler & 55P Chevy Power Lok clutches, Model 20 also, POSI.

    Product Features:
    • Clutch kit
    • Fits Chrysler 8.75″, 1955-1964 GM passenger car and AMC Model 20 Powr Lok positraction
    See More

    Yukon Gear – Standard Open Spider Gear Kit For ’55 To ’64 GM Chevy 55P With 17 Spline Axles (Part No.16046)

    Standard Open Spider Gear Kit For '55 To '64 GM Chevy 55P With 17 Spline Axles

    from

    $269.99
    Yukon standard open spider gear kit for ’55 to ’64 GM Chevy 55P with 17 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

    Product Features:
    • Spider gear kit
    • Fits 1955-1964 GM passenger car open differential
    • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G884355)

    Performance Differential Ring and Pinion

    from

    $268.99


    Product Features:
    • GM10BL 8.2″ R & P – 355 RATIO DROP OUT STYLE
    See More

    Motive Gear – Performance Differential Ring and Pinion (Part No.G884308)

    Performance Differential Ring and Pinion

    from

    $263.99
    Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
    See More

    Yukon Gear – Bearing Race Driver (Part No.56017)

    Bearing Race Driver

    from

    $215.99
    Bearing race driver. No return.

    Product Features:
    • Bearing race driver
    • Fits HM89410 race
    • All steel construction
    See More

    Most Popular 1960 Chevrolet El Camino Transfer Cases

    Customize your Chevrolet with 5 Transfer Cases products like Mounting Adapter Seals, Input Shaft Seals, and Mounting Adapter Bearing, all priced under $24.99.

    National – Multi Purpose Seal (Part No.5200)

    Multi Purpose Seal

    from

    $12.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.9613S)

    Multi Purpose Seal

    from

    $7.99
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    National – Multi Purpose Seal (Part No.7412S)

    Multi Purpose Seal

    from

    $14.29
    National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Low swell in hydrocarbon fluids
    • Design type: spring loaded; multi-lip
    • Provides good low temperature capability
    • Temperature range: -40°F to 225°F; -40°C to 107°C
    • Delivers quality and reliable performance for every type of repair
    See More

    Driveworks – Oil Seal Kit (Part No.S-5200)

    Oil Seal Kit

    from

    $6.79
    Value-priced seal meets all cataloged application requirements.

    Product Features:
    • Brand may vary by location
    See More

    National – Shaft Repair Sleeve (Part No.99125)

    Shaft Repair Sleeve

    from

    $24.99
    National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

    Product Features:
    • Designed to repair damaged, grooved or worn shafts
    • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
    • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
    • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
    • Easy to install with removable flange and installation tool
    • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
    See More

    Top Picks for 1960 Chevrolet El Camino Drive Shafts and Axles

    Upgrade Chevrolet El Caminos with top-quality Drive Shafts and Axles parts, including 5 OEM and aftermarket selections for your 1960 model.

    National – Multi Purpose Bearing (Part No.HB-206-FF)

    Multi Purpose Bearing

    from

    $46.49
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

    Center Support Bearing Motor Mount: Center, 1 Piece

    from

    $13.49
    Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

    Product Features:
    • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
    • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
    • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
    • For Years: 1955-2002
    • Weight approx: 2 Lbs
    • BEARING ID / BORE: 1.1811 INCH / 30 MM
    • CENTERLINE: 3.50 INCH / 89 MM
    • MOUNT WIDTH: 1.50 INCH / 38 MM
    • COMPLETE MOUNT
    See More

    National – Bearings (Part No.307-L)

    Bearings

    from

    $37.99
    National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

    Product Features:
    • Premium bearing design matches OEM specifications
    • Precision manufactured using premium-grade steel for outstanding durability and performance
    • Controlled heat treating process for lasting performance and extended bearing life
    • Industry leading coverage
    • Professional technicians know they can depend on National
    See More

    Yukon Gear – The Carrier Bearing Puller (Part No.56072)

    The Carrier Bearing Puller

    from

    $883.99
    The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

    Product Features:
    • Carrier bearing puller
    • Works with an impact gun to safely and easliy remove carrrier bearings
    See More

    Yukon Gear – 58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr (Part No.30127)

    58-64 Chevy Passenger Axle Seal, Use With Bcarw607Nr

    from

    $74.99
    58-64 Chevy Passenger axle seal, USE w/ BCARW607NR.Yukon Mighty seal.

    Product Features:
    • Axle seal
    • Fits 1958-1964 GM passenger car
    • For use with RW607NR bearing
    See More

    In-Demand Universal Joints for 1960 Chevrolet El Caminos

    Select from 10 premium Universal Joints parts for your 1960 Chevrolet El Camino, with prices ranging from $4.49 to $319.99.

    Brute Force – Universal Joint (Part No.2-0053BF)

    Universal Joint

    from

    $8.39
    Universal Joint – Brute Force
    See More

    Neapco – Universal Joint (Part No.1-0154)

    Universal Joint

    from

    $6.49
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.2-0053)

    Universal Joint

    from

    $5.39
    Universal Joint
    See More

    Neapco – Universal Joint (Part No.1-0153)

    Universal Joint

    from

    $4.49
    Universal Joint
    See More

    Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

    1310 U/Joint With Zerk Fitting On Cross

    from

    $44.99
    Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
    See More

    Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

    1310 To 1330 Adapter U/Joint

    from

    $59.99
    Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
    See More

    Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

    1310 To Mechanics 3R Adapter U/Joint

    from

    $109.99
    Yukon 1310 to Mechanics 3R adapter U/Joint.
    See More

    Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

    1310 Lifetime U/Joint

    from

    $57.99
    1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
    See More

    Yukon Gear – Yoke For GM 55P And 55T With A 1310 U/Joint Size (Part No.41089)

    Yoke For GM 55P And 55T With A 1310 U/Joint Size

    from

    $319.99
    Yukon yoke for GM 55P and 55T with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.

    Product Features:
    • Fits 1955-1964 GM passenger car and truck
    • 17 spline
    • 1310 u-joint size
    • Outside snap ring design
    • 3.219″ snap ring span
    • 1.062″ cap diameter
    • Strap style
    See More

    Neapco – Universal Joint (Part No.2-0052)

    Universal Joint

    from

    $15.59
    Universal Joint
    See More

    Top-Rated Drivetrains Brands For Your 1960 Chevrolet El Camino

    Shop for the best-rated brands offering Drivetrains and other products for your 1960 Chevrolet El Caminos. Below you’ll find some of our best rated Drivetrains from Valvoline and National, and more. Drivetrains from these brands that fit a 1960 El Camino start at just $7.99 and are rated as high as 5 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

    Popular Valvoline 1960 Chevrolet El Camino Drivetrains

    When it comes to maintaining or upgrading your 1960 Chevrolet El Camino, using quality Drivetrains is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Drivetrains, specifically designed for the 1960 Chevrolet El Camino. With over 2 Valvoline brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.49, with an average price of just $25.24. Plus, with over 19 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    DEXRON - VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
    from
    $14.49

    (2)

    DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

    “I’ve used this in my 2005 2500HD since I bought the truck with 20k on it now at 280k changed every other year maybe 40k I’d put on in two years,
    I pu”

    DEX/MERC Automatic Transmission Fluid, 1 Gallon
    from
    $35.99

    (17)

    DEX/MERC Automatic Transmission Fluid, 1 Gallon

    “Equivalent to oem”

    Popular National 1960 Chevrolet El Camino Drivetrains

    National auto parts is one of the highest quality Drivetrain brands in the market. Any 1960 Chevrolet El Camino owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1960 El Camino, Advance Auto Parts carries a full inventory of 13 National Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these National Drivetrains range from $7.99 to $46.49, plus, with more than 19 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

    Bearings
    from
    $14.29
    This product is not rated

    Bearings

    “”

    Bearings
    from
    $11.49
    This product is not rated

    Bearings

    “”

    Bearings
    from
    $12.99
    This product is not rated

    Bearings

    “”

    FAQs for 1960 Chevrolet El Camino Drivetrains

    Which Drivetrains are best-sellers for 1960 Chevrolet El Caminos?

    Out of 82 Drivetrains that fit 1960 Chevrolet El Caminos, the following parts are the top sellers:

    What’s the price range for 1960 Chevrolet El Camino Drivetrains?

    Drivetrain prices for the 1960 Chevrolet El Camino start at $4.49 and go up to $1,566.99 for the most premium parts.

    What’s the average price of a Drivetrain for a 1960 Chevrolet El Camino?

    The average price for Drivetrains for the 1960 Chevrolet El Camino is $171.77. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Drivetrains for other Chevrolet El Camino model years?

    Yes, we currently carry Drivetrains for 25 model years of Chevrolet El Caminos between 1959 and 1987. Drivetrains are bought most frequently for the following model years: 1987, 1986, 1985, 1984, 1983, 1982, 1981, 1980, and 1979.

    What are the cheapest Drivetrains for my 1960 Chevrolet El Camino?

    The cheapest 1960 Chevrolet El Camino Drivetrains we carry in stock are:

    What are the top-rated Drivetrains that fit the 1960 Chevrolet El Camino?

    Out of 137 reviews by customers, our 1960 Chevrolet El Camino Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1960 Chevrolet El Camino and their top-rated products:

    What types of Drivetrains do you sell for my 1960 Chevrolet El Camino?

    Can I get help with 1960 Chevrolet El Camino Drivetrain orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.

    What is your return policy for Chevrolet El Camino Drivetrains?

    Advance Auto Parts keeps returns simple. For new Chevrolet El Camino Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.