1960 Chevrolet Corvette Ignition Coils and Boots

Essential 1960 Chevrolet Corvette Ignition Coils and Boots

MSD Ignition – Coils; Pro Power; GM LS2/3/4/7/9; 05-13; 8-Pack (Part No.82878)

Coils; Pro Power; GM LS2/3/4/7/9; 05-13; 8-Pack

from

$909.99
MSD ignition’s Multiple Spark Coils (MSC) will fit in place of the stock gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance. The MSC delivers up to three times the current of the stock coils. Plus, the coils fire multiple times.

Product Features:
  • Multiple Sparks At Idle RPM
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48933)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$85.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

MSD Ignition – Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation (Part No.5526)

Direct-Fit Replacement Coil with Improved Energy Output and Easy Installation

from

$65.99
These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

Product Features:
  • Replacement Coil For GM Dual Connector Coil
  • Improved Turns Ratio
  • Lower Primary Resistance
  • Bolt-In replacement coil
  • Produce More Output Voltage
  • Smooth Idle
See More

ACDelco – Ignition Coil (Part No.D580)

Ignition Coil

from

$61.99
An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48881)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$137.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBA1147)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$77.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1368)

Ignition Coil: Meets or Exceeds OE Specifications, 1 Count

from

$51.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.26C1005)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$42.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance.

Product Features:
  • Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
  • 100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
  • Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
  • 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
  • 100% end-of-line tested to ensure confidence and product reliability, every time.
See More

NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.49035)

Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece

from

$35.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience

Product Features:
  • OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
  • OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
  • EASE OF INSTALLATION: Includes mounting hardware and necessary components required for certain applications to ensure worry-free installation
  • THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
  • EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
  • PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

MSD Ignition – Wire Set; Street Fire; Chevy 366-454; Socket (Part No.5561)

Wire Set; Street Fire; Chevy 366-454; Socket

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

NGK – NGK Wire Set (Part No.51434)

NGK Wire Set

from

$40.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Black Super Conductor; Corvette; 305; 350; HEI (Part No.31763)

Wire Set; Black Super Conductor; Corvette; 305; 350; HEI

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Bolt-on Performance
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

Carquest Premium – Spark Plug Wire Set (Part No.35-8346)

Spark Plug Wire Set

from

$83.99
CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding del

Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – NGK Wire Set (Part No.51428)

NGK Wire Set

from

$39.49
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)

Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor

from

$145.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8352)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$75.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy; Socket (Part No.31593)

Wire Set; Black Super Conductor; Small Block Chevy; Socket

from

$181.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Accel – GM F-Body Ls1/Ls6 01-97 (Part No.9052C)

GM F-Body Ls1/Ls6 01-97

from

$193.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

MSD Ignition – Wire Set; Street Fire; Corvette 305-350; HEI; 75-82 (Part No.5566)

Wire Set; Street Fire; Corvette 305-350; HEI; 75-82

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8141)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$46.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

NGK – NGK Wire Set (Part No.51130)

NGK Wire Set

from

$80.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8126)

Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit

from

$39.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Delphi – Ignition Wire Set (Part No.F10203329509DEL)

Ignition Wire Set

from

$97.75
Ignition Wire Set

NGK – NGK Wire Set (Part No.51054)

NGK Wire Set

from

$79.99
NGK ultra-low resistance mag core wire sets provide outstanding performance and durability. High-temp premium silicone outer jacket and inner EPDM/silicone insulation contain high voltage currents for excellent dielectric strength. Stainless steel winding

Product Features:
  • PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
  • BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees C, inner insulation EPDM or silicone for best dielectric strength
  • STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
  • CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
See More

ACDelco – Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core (Part No.9508N)

Specific FitSpark Plug Wire Set: Fiberglass Reinforced Latex Graphite Core

from

$63.99
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

8Mm Super Stock Spiral Uni Bu

from

$89.99
The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:
  • 500 Ohms/ft Of Resistance
  • 550 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • High RFI Suppression For Street And Strip Use
  • Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
  • 8mm High Gloss Silicone Jacket
See More

Accel – 8Mm Super Stock Copper Uni (Part No.4038)

8Mm Super Stock Copper Uni

from

$72.99
ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:
  • 7mm And 8mm High Gloss Silicone Jacket
  • 450 F Rated Silicone Jacket
  • Stainless Steel Plug Terminals
  • RFI Suppression For Street Driven Applications
  • Custom-fit Universal And Import Coverage
  • High-strength Fiberglass Braid Construction
  • Pre And Post HEI Vehicles
See More

1960 Chevrolet Corvette Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 1960 Chevrolet Corvette. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 15 different Ignition Coils and Boots in our inventory ranging from $11.99 to $181.99. That means you can find the exact parts or products you need to keep that 1960 Chevrolet Corvette running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1960 Chevrolet Corvette. Carquest, Carquest Premium, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 1960 Chevrolet Corvette, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 42 reviews in this category, some of the top rated parts include Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor with 5.0 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 1960 Chevrolet Corvette rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 1960 Chevrolet Corvette Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1960 Chevrolet Corvette demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Corvette the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 1960 Chevrolet Corvette, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil
from $39.05
(3)
Ignition Coil
Ignition Coils

Top 1960 Chevrolet Corvette Ignition Coils and Boots from Driveworks

Driveworks products are another trusted brand when it comes to Ignition Coils and Boots for your 1960 Chevrolet Corvette. Popular Driveworks parts include:
Ignition Coil
from $35.05
(17)
Ignition Coil
Ignition Coils

FAQs for 1960 Chevrolet Corvette Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 1960 Chevrolet Corvette?

Out of 15 Ignition Coils and Boots for the 1960 Chevrolet Corvette, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
from $41.49
This product is not rated
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count
Ignition Coils
Ignition Coil: Meets OE Specifications, 1 Count
from $35.49
This product is not rated
Ignition Coil: Meets OE Specifications, 1 Count
Ignition Coils
Ignition Coil
from $34.49
This product is not rated
Ignition Coil
Ignition Coils

What are the top-rated 1960 Chevrolet Corvette Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 1960 Chevrolet Corvette based on customer reviews/ratings are:
Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor
from $145.99
(1)
Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor
“Very good product and a great price!”