1960 Chevrolet C10 Pickup Performance Engines

Essential 1960 Chevrolet C10 Pickup Performance Engines

FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2918)

Engine Crankshaft Seal Kit

from

$42.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)

PERFORMANCE REAR MAIN SEAL SET

from

$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)

VALVE SPRINGS, 1.509" DUAL 1 ST

from

$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

Product Features:
  • Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
  • O.D.: 1.509″, I.D.: 0.697″
  • Dual valve springs with damper
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5822)

Ultra Seal: Intake Gasket

from

$34.99
Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Creates Tight Leak proof Seal
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5827)

Ultra Seal: Intake Gasket

from

$38.59
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • Complete with manifold end seals and distributor gasket
  • For OE replacement, high performance street, drag race and oval track use
See More

Mr. Gasket – Intake Manifold Bolts (Part No.6091)

Intake Manifold Bolts

from

$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:
  • Features 12-point Smaller-than-standard Bolt Head
  • Thick Flat Washers Distribute Optimum Clamp Load
  • Ideal Use Where Space Is Minimal On Race Manifolds
  • Bolts And Washers Zinc Plated For Protection
  • Zinc Plated For Protection
See More

Mr. Gasket – Intake Bolt Kit (Part No.5004)

Intake Bolt Kit

from

$61.99
Finish your custom engine job with these show quality grade 5 chromed bolts, includes AN washers which have no exposed shoulder for a professional appearance. Includes (12) 3/8-16 x 1-1/4 inch bolts and (12) 3/8 inch AN washers.

Product Features:
  • Chrome plated
  • Grade 5
  • AN washers with no exposed shoulder for a professional appearance
  • Ideal For Street Rods/Machines
See More

Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block (Part No.12-206-2)

High Energy/Marine 212/212 Hydraulic Flat Cam for Chevrolet Small Block

from

$284.99
HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.

Product Features:
  • HYDRAULIC – High Energy: Vans, pickups, 4WD and towing, in 350c.i., good idle, strong mid-range torque. OR High Energy Marine: Single or dual engine with inboard/outboard drive for ski and economy.
  • 260/260 Advertised Duration, 212/212 Duration @ .050″, .440″/.440″ Lift, 110 Lobe Separation
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA (Part No.12-205-2)

CAMSHAFT, SBC 252 HIGH ENERGY HYDRAULIC 1 EA

from

$518.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1804)

PERFORMANCE OIL PAN GASKET SET

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Water Pump Big-Block Chevy Short/Standard in Polished Finish (Part No.8860)

Water Pump Big-Block Chevy Short/Standard in Polished Finish

from

$474.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Edelbrock – Water Pump Big-Block Chevy Standard/Long in Polished Finish (Part No.8861)

Water Pump Big-Block Chevy Standard/Long in Polished Finish

from

$475.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.

Product Features:
  • Maximum Cooling for Street and Racing Engines
  • Internal Passages Are Balanced for Maximum Flow
  • Impeller is Larger than Others For Max Pressure
  • Impeller Vanes Dramatically Increase Flow Rates
  • Equal Distribution to Both Sides of Block
  • Only Flows in One-Direction for Optimum Efficiency
See More

Competition Cams – CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT (Part No.CL12-206-2)

CAM & LIFTER KIT, SBC 260H HIGH ENERGY HYD 1 KT

from

$323.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Competition Cams – Magnum 253/253 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454 (Part No.CL11-214-4)

Magnum 253/253 Hydraulic Flat Cam and Lifter Kit for Chevrolet Big Block 396-454

from

$376.99
An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts. Ideal for use with higher compression ratio engines that

Product Features:
  • Best with aftermarket torque converters and 9.5:1 compression.
  • Great high RPM power.
  • Easy on valve train parts.
  • Can be used with mild ratio rocker arms and traditional performance valve springs.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Engine Valve Cover Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Street Tunnel Ram Small Block Chevy Intake Manifold (Part No.7110)

Street Tunnel Ram Small Block Chevy Intake Manifold

from

$631.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:
  • For 3500 to 7500 RPM
  • Use Where Low-End Torque is Not a Prime Factor
  • Great For Engines w/Slightly Modified Heads
  • Top Has Vacuum Outlet for Power Brakes
  • Will Accept Forward and Sideways Mounted Carbs
  • Carburetor Center-to-Center Dimensions 8.875 in
  • HEI Ignition Will Not Clear Manifold
  • For Street Mach.; Street Rods; Pro-Street; Marine
See More

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish (Part No.27011)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

from

$504.99


Product Features:
  • Polished Version Of Edelbrock PN[2701]
  • Polish is Hand-Buffed for Brilliant Shine
  • Maximizes Performance with Edelbrock Carburetors
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
See More

Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)

Lts Throttle Cable Brkt Chev

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

Edelbrock – Cylinder Head Gasket Set for Chevrolet (Part No.7310)

Cylinder Head Gasket Set for Chevrolet

from

$58.99
Product Features:
  • 4.125 in. Cylinder Bore Diameter
  • 0.039 in. Thickness
  • 8.7cc Volume
  • Charcoal Color
  • Two Piece Configuration
See More

Mr. Gasket – Mls Head Gasket (Part No.3132G)

Mls Head Gasket

from

$102.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.165 inch: Compressed thickness – .040 inch
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Mr. Gasket – Mls Head Gasket (Part No.3151G)

Mls Head Gasket

from

$114.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:
  • Gasket bore – 4.540 inch: Compressed thickness – .040 inch
  • Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
  • Optimized sealing embossments seals extreme cylinder pressure
  • Provides excellent stability and reduces cylinder bore distortion.
  • Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
  • Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
  • For high-performance street, drag race and oval track use
See More

Edelbrock – Front Timing Cover Gasket Set #6997 For Small-Block Chevy, With Front Seal (Part No.6997)

Front Timing Cover Gasket Set #6997 For Small-Block Chevy, With Front Seal

from

$17.99
Product Features:
  • For Small-Block Chevy
  • One Piece Configuration
  • Includes Front Cover Gasket & Front Seal
  • Includes Necessary Gaskets & Crankshaft Oil Seal
  • For Replacement Or Installation
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.94)

Timing Cover Gasket Set

from

$21.79
Mr. Gasket Performance Gaskets are a low density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. Intended for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit.brbrThis Mr. Gasket Performance Timing Cover Gasket Kit includes the timing cover gasket and water pump gasket for your Gen IV or Gen V Chevy 396,402,427,454 Big Block.

Product Features:
  • Includes Timing Cover Gasket and Water Pump Gaskets
  • Won’t shrink or stick and provide an airtight leak proof seal
  • Engineered specifically for big block Chevys and ideal for high performance and race applications
  • Ensures optimum torque retention ideal crush resistance and excellent sheer strength using minimal clamp force yet still releases easily
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.90)

Timing Cover Gasket Set

from

$21.99
Mr. Gasket Performance Timing Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:
  • Manufactured from high-density cork/rubber blend gasket material
  • Provides excellent sealing and durability
  • For OE replacement, high performance street, drag race and oval track use
See More

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More

1960 Chevrolet C10 Pickup Performance Engines

Maybe you’re in the middle of a full rebuild of that 1960 Chevrolet C10 Pickup. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 35 different Performance Engines in our inventory ranging from $14.99 to $999.99. That means you can find the exact parts or products you need to keep that 1960 Chevrolet C10 Pickup running smoothly.

Performance Engines are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 1960 Chevrolet C10 Pickup. Edelbrock, FEL-PRO Performance, and Competition Cams are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Engines for your 1960 Chevrolet C10 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 21 reviews in this category, some of the top rated parts include Intake Manifold Bolts with 4.6 stars and Engine Valve Cover Gasket Set with 5.0 stars.

So if you’re in the market for aftermarket Performance Engines to keep your 1960 Chevrolet C10 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Engines Brands To Make Your 1960 Chevrolet C10 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1960 Chevrolet C10 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your C10 Pickup the best it can be. Be sure to browse some of our top Performance Engines brands and parts.

Popular Edelbrock Performance Engines

We carry Edelbrock parts in our stock across Performance Intake Manifolds categories, plus more. For a 1960 Chevrolet C10 Pickup, our most popular Edelbrock Performance Engines include:
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
from $195.99
(7)
Performer EPS Intake Manifold for 1955-86 Small-Block Chevy
Performance Intake Manifolds

FAQs for 1960 Chevrolet C10 Pickup Performance Engines

What are the most purchased Performance Engines for the 1960 Chevrolet C10 Pickup?

Out of 35 Performance Engines for the 1960 Chevrolet C10 Pickup, the most popular in our inventory are:
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
from $39.49
(1)
Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
from $52.99
(1)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
Performance Engine Cylinder Head Gaskets
Engine Crankshaft Seal Kit
from $21.49
(2)
Engine Crankshaft Seal Kit
Performance Engine Main Bearing Gasket Sets

What are the top-rated 1960 Chevrolet C10 Pickup Performance Engines?

Top-rated Performance Engines for your 1960 Chevrolet C10 Pickup based on customer reviews/ratings are:
Intake Manifold Bolts
from $32.09
(5)
Intake Manifold Bolts
“Excellent product.”
Engine Valve Cover Gasket Set
from $23.49
(1)
Engine Valve Cover Gasket Set
“Perfect fit”
PERFORMANCE VALVE COVER GASKET SET
from $23.49
(1)
PERFORMANCE VALVE COVER GASKET SET
“Great Quality Product”