1960 Chevrolet Brookwood Performance and Racing Products

Essential Performance and Racing Products for 1960 Chevrolet Brookwoods

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Edelbrock – Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum (Part No.4145)

Classic Series Valve Covers: Small Block Chevy 262-400 1959-86, Aluminum

from

$371.99
The Edelbrock #4145 Classic Series Valve Covers are designed for Chevy 262-400 V8 1959-86 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.

Product Features:
  • Small Block Chevy 262-400 1959-86
  • Tall
  • Polished Aluminum
  • Set Of Two
See More

Mr. Gasket – Oil Filter Adapter (Part No.1272)

Oil Filter Adapter

from

$42.99
This oil filter adapter kit replaces the factory GM (General Motors) oil filter adapter and is manufactured from high grade aluminum. Required for Chevrolet crate engines that does not include an oil filter adapter. Replaces oil filter adapter’s damaged when removing engines to be overhauled. Oil filtered adapter includes filter bypass valve. Uses the following Chevrolet oil filters – AC Delco PF-25 or PF35, Fram PH5 (tall) or PH30, and WIX 51069. Includes mounting bolts.

Product Features:
  • Replaces GM Oil Filter Adapter #3952301 and 19299222
  • Fits Chevrolet 307-400 V8 1968-86 and 396-454
  • Attaches Spin-on Oil Filter To Engines Block
  • Embossed base provides a leak-free sealing surface. Kit does not come with a gasket
  • Kit includes Oil Filter adapter and (2) 5/16″-18 x 1.00″ long bolts
  • Uses the following Filters: Fram PH5(Tall) OR PH30, Wix 51069, AC Delco PF-25 or PF-35.
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1025)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$72.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Mr. Gasket – Timing Cover Gasket Set (Part No.94)

Timing Cover Gasket Set

from

$21.79
Mr. Gasket Performance Gaskets are a low density material that conforms well to irregular flange surfaces and has very good crush resistance at high flange pressures. Intended for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit.brbrThis Mr. Gasket Performance Timing Cover Gasket Kit includes the timing cover gasket and water pump gasket for your Gen IV or Gen V Chevy 396,402,427,454 Big Block.

Product Features:
  • Includes Timing Cover Gasket and Water Pump Gaskets
  • Won’t shrink or stick and provide an airtight leak proof seal
  • Engineered specifically for big block Chevys and ideal for high performance and race applications
  • Ensures optimum torque retention ideal crush resistance and excellent sheer strength using minimal clamp force yet still releases easily
See More

Edelbrock – Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal (Part No.6998)

Front Timing Cover Gasket Set #6998 For Big-Block Chevy, With Front Seal

from

$31.99
Edelbrock part #6998 Front Timing Cover Gasket set for Big-Block Chevy. Includes front cover gasket and front seal.

Product Features:
  • Includes replacement timing cover and water pump gaskets and the crank oil seal for big block Chevrolet engines
  • Features a tough, scuff-resistant silicone rubber coating
  • Helps in sealing without the engine warming up
  • Reduces fluid migration through the gasket
  • Resists fatigue
See More

Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.11-600-4)

Thumpr 227/241 Hydraulic Flat Cam

from

$542.99
HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.

Product Features:
  • HYDRAULIC – Thumpr: High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
  • 279/296 Advertised Duration, 227/241 Duration @ .050″, .498″/.483″ Lift, 107 Lobe Separation
  • Valve spring upgrade required
See More

Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA (Part No.11-202-3)

CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA

from

$235.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering

Product Features:
  • Good blend of efficiency and performance.
  • Perfect choice for performance street rebuilds.
  • Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
See More

Mr. Gasket – Aluminum Exhaust Gaskets for Intense Heat Resistance (Part No.7402G)

Aluminum Exhaust Gaskets for Intense Heat Resistance

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Mr. Gasket – Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (Part No.7401G)

Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal

from

$42.99
Upgrade to Mr. Gasket Aluminum Layered Header Gaskets and eliminate blown exhaust gaskets forever. They conform to warped and damaged surfaces to create an airtight, leak-proof seal and will not shrink or deteriorate EVER.

Product Features:
  • Withstands Intense Exhaust Heat
  • Reusable header, exhaust manifold and collector flange gaskets
  • Resists Deteriorating
  • Manufactured from “dead soft” aluminum layers – .125″ thick
  • Easy Removal For Disassembly
  • Conforms easily to surface irregularities (warped flanges)
  • Compresses down to 0.060″ to create a tight leak-proof seal
  • Will not shrink, deteriorate, or blow out- eliminating gasket leaks
  • For high performance street, drag race and oval track use
See More

Mr. Gasket – Rear Main Seal Gasket (Part No.1960)

Rear Main Seal Gasket

from

$23.99
This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:
  • Repairs That Leaky Rear Main Sail
  • Silicone Rubber to Withstand Extreme Engine Oil Temperatures
  • Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
  • Injection Molded for Precise Fit
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

PERFORMANCE REAR MAIN SEAL SET

from

$36.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
  • Not intended for use in emission controlled vehicles.
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Edelbrock – Street Tunnel Ram Big Block Chevy 2-O Intake Manifold (Part No.7115)

Street Tunnel Ram Big Block Chevy 2-O Intake Manifold

from

$798.99
For 3500 to 7500 PRM. Use where low-end torque is not a prime factor. Great for engines with slightly modified heads. HEI ignition will not clear manifold. Street machines, street rods, pro-street and marine.

Product Features:
  • For 3500 to 7500 RPM
  • Use Where Low-End Torque is Not a Prime Factor
  • Great For Engines w/Slightly Modified Heads
  • Top Has Vacuum Outlet for Power Brakes
  • Will Accept Forward and Sideways Mounted Carbs
  • Carburetor Center-to-Center Dimensions 9.38 in
  • HEI Ignition Will Not Clear Manifold
  • Street Machines; Street Rods; Pro-Street; Marine
See More

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Performer Small-Block Chevy Intake Manifold for Street Performance

from

$339.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

Mr. Gasket – Fuel Pump Mounting Plate (Part No.1514)

Fuel Pump Mounting Plate

from

$16.99
Ideal for mounting a stock original equipment pump. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
See More

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

Fuel Pump Block-Off Plate

from

$12.99
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8 (Part No.5795)

Complete Sure Seat Valve Spring Kit for Chevy 396-402-427-454 V8

from

$225.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Non-Rotator Style: Dyno Tested and Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

from

$141.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • .190 Wire Size
  • Single Coil Spring Type
  • Set of 16
See More

Mr. Gasket – Oil Pan Gasket (Part No.196)

Oil Pan Gasket

from

$30.19
Mr. Gasket Performance Oil Pan Gaskets are manufactured from a high-density cork /rubber blend gasket material to provide excellent sealing and durability. Comes complete with molded rubber front/rear oil pan seals. For original equipment replacement and high performance street use.brbrFits Chevrolet 265,283,302,307,327,350,400 Gen I Small Block.

Product Features:
  • Manufactured from high-density cork /rubber blend gasket material
  • Provides excellent sealing and durability
  • Complete with molded rubber front/rear oil pan end seals where applicable
  • For OE replacement and high performance street use
See More

Mr. Gasket – Oil Pan Gasket (Part No.197)

Oil Pan Gasket

from

$30.99
Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.

Product Features:
  • One-piece design
  • Eliminates potential leaks
  • Prevents over tightening
  • Prevents torque loss
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$85.09
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

Competition Cams – MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST (Part No.1412-16)

MAGNUM ROLLER ROCKERS, SMALL BLOCK CHEVY 1.52 1 ST

from

$213.99
These Magnum Roller Rocker Arms for Chevy V8 265-400 and V6 200-262 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.52 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed

Product Features:
  • Roller tip reduces friction while stiff design and superior ratio accuracy yield more effective valve lift
  • For applications with less than 350 lbs. of open spring pressure
  • Constructed from 8620 chromemoly steel, a superior material that will not flex and ensures maximum lift
  • Ultimate street roller rocker arm designed for serious performance enthusiasts
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Engine Valve Cover Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1605)

Engine Valve Cover Gasket Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Upgrade your 1960 Chevrolet Brookwood with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1960 Chevrolet Brookwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Brookwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Performance and Racing Products for the 1960 Chevrolet Brookwood, designed to meet your needs without breaking the bank. From Performance Engine replacements to Performance Fuel Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1960 Chevrolet Brookwood at great prices. Our Performance and Racing Products inventory for this model ranges from just $12.99 to $529.99, with an average price of $155.27. Our 36 Performance and Racing Products in stock come from 9 trusted brands, so you’re sure to find the right part for your 1960 Chevrolet Brookwood without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1960 Chevrolet Brookwood, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Edelbrock, FEL-PRO Performance, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 5 stars average rating from customers. Edelbrock and FEL-PRO Performance also bring quality to the table, with Performance and Racing Products available starting at $20.29, and at an average 4 stars rating. With 101 customer reviews and counting, our 1960 Chevrolet Brookwood Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1960 Chevrolet Brookwood is always ready to roll. We’re committed to providing you with everything you need to keep your Brookwood in top shape, all in one place. Start shopping confidently below for your 1960 Chevrolet Brookwood!

Best-Selling Performance Engines for 1960 Chevrolet Brookwoods

Enhance the driving experience in your Chevrolet with 26 quality Performance Engine components, starting at $20.29.

Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

from

$195.99


Product Features:
  • Maximizes Performance with Edelbrock Carburetors
  • Runners Tuned to Match Square Bore Carburetor
  • Maximizes Peak Torque Around 3500 RPM
  • Excellent Throttle Response and Mid-Range Power
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
See More

FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
  • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
  • Raises combustion sealing force to roughly three times that of standard head gaskets.
  • Steel wire rings for the greatest combustion seal strength.
  • Not intended for use in emission controlled vehicles.
See More

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)

Engine Valve Cover Gasket Set

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Non-Rotator Style: Dyno Tested and Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)

PERFORMANCE VALVE COVER GASKET SET

from

$23.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Die cut silicone rubber gaskets conform to out-of-flat covers
  • Great for on-again/off-again situations
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Valve Cover Gasket Set for Chevrolet

from

$35.99
Product Features:
  • Valve Cover Gasket
See More

Edelbrock – Sure Seat Valve Springs for Ford 429/460 V8 1969-1987 (Part No.5767)

Sure Seat Valve Springs for Ford 429/460 V8 1969-1987

from

$111.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks black oxide coated. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)

Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

from

$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
  • SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

from

$65.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • For Use With Cast Iron Heads
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Use with Original Equipment Heads Only
See More

FEL-PRO Performance – Engine Timing Cover Gasket (Part No.2335)

Engine Timing Cover Gasket

from

$20.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Steel core gasket construction
  • Exclusive design permits significantly faster gasket installation while eliminating potential sealing leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer Small-Block Chevy Intake Manifold for Street Performance (Part No.3701)

Performer Small-Block Chevy Intake Manifold for Street Performance

from

$339.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

Edelbrock – Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy (Part No.2703)

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

from

$322.99
Edelbrock part #2703 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thro

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Satin Finish
  • Non-EGR W/ Oil Fill Tube
See More

Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)

CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA

from

$529.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)

CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA

from

$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1075)

Ultra Seal: Competition Screw-In Rocker Arm Studs

from

$94.99
Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:
  • Black Oxide Coated Grade 8 Steel
  • Kit Contains 16 Studs
  • Easy To Install
  • Heat Treated Steel
  • Prevents Stud Flexing
  • Black Plated Finish
See More

FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set (Part No.1802)

Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 5 Piece Set

from

$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold (Part No.75013)

Performer RPM AIR-Gap Small Block Chevy Black Intake Manifold

from

$525.99
Edelbrock part #75013 RPM Air-Gap RPM intake manifold is designed for 1955-86 262-400 c.i.d. Chevrolet V8’s. The award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that’s used on our Victor Series competition intakes.

Product Features:
  • 1500-6500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 4.2 in. Front Height, 4.72 in. Center Height, 5.25 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)

CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA

from

$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i

Product Features:
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
  • Best with aftermarket converters and more rear gear.
  • Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
See More

Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)

C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern

from

$473.99
Product Features:
  • Designed for Idle to 5500 RPM
  • Manifold has a Balanced 180+ Firing Order
  • Contains Exhaust Gas Heat Riser
  • Offers Excellent Performance Potential
  • Front Oil Filler Tube Boss Included
  • Carburetor Center-to-Center Dimensions = 5-1/2 in
  • Also Available Polished PN[5419] But Not Fit HEI
  • Use Rochester 2GC (small 1-7/16 in bore)
See More

Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

from

$445.99
Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR W/ Oil Fill Tube
See More

Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3706)

Performer Intake Manifold Small-Block Chevy

from

$381.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 Deg Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Accepts Late-Model Choke; Waterneck; and HEI
  • Accepts A/C And Alternator
  • Accepts Exhaust Heated Chokes and Accepts EGR
See More

Weiand – Stealth; Intake Manifold (Part No.8150P)

Stealth; Intake Manifold

from

$371.99


Product Features:
  • High Rise/Dual Plane Design For Maximum Torque
  • Fully CNC Machined For A Perfect Fit
  • Square Bore Carburetor Flange
  • Exhaust Crossover For Improved Street Drivability
  • Permanent Mold Casting Process
  • Lighter/Smoother/Better Looking
  • More Consistent Castings
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$147.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Dyno Tested And Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

from

$141.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • .190 Wire Size
  • Single Coil Spring Type
  • Set of 16
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2912)

PERFORMANCE REAR MAIN SEAL SET

from

$36.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
  • Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
  • Not intended for use in emission controlled vehicles.
  • Not intended for use in emission controlled vehicles.
See More

Most Popular 1960 Chevrolet Brookwood Performance Fuel Systems

Customize your Chevrolet with 2 Performance Fuel Systems products like Performance Fuel Pumps, all priced under $12.99.

Mr. Gasket – Fuel Pump Block-Off Plate (Part No.1515)

Fuel Pump Block-Off Plate

from

$12.99
This is what you need when changing your manual fuel pump to electric. It blocks the hole that remains when you remove the mechanical fuel pump from the engine to keep the oil inside. This plate is precision machined and is chrome plated.

Product Features:
  • Chrome Plated Steel
  • Comes With Gasket
See More

Spectre – Sbc Blk Off Plate W/Bolts (Part No.42463)

Sbc Blk Off Plate W/Bolts

from

$12.99
Spectre’s triple chrome plated Fuel Pump Block Off Plate was designed for small block Chevrolet engines. Engineered for optimum fit and function, this kit includes a block off plate gasket and chrome mounting bolts with washers.

Product Features:
  • Necessary if switching to electric fuel pump
  • Includes block off plate gasket
  • Includes chrome mounting bolts with washers
  • Triple chrome plated
See More

Top Picks for 1960 Chevrolet Brookwood Performance Ignition Products

Upgrade Chevrolet Brookwoods with top-quality Performance Ignition Products parts, including 2 OEM and aftermarket selections for your 1960 model.

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

In-Demand Performance Exhaust Products for 1960 Chevrolet Brookwoods

Select from 3 premium Performance Exhaust Products parts for your 1960 Chevrolet Brookwood, with prices ranging from $25.99 to $85.39.

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Flowtech – Real-Seal; Header Gasket (Part No.99150AFLT)

Real-Seal; Header Gasket

from

$85.39


Product Features:
  • Water/Weather Resistant
  • Re-Useable
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching
  • Made In USA
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Most Sold 1960 Chevrolet Brookwood Performance Oil Filters

Explore our best-selling Chevrolet parts for the 1960 Brookwood among 1 OEM and aftermarket options starting from $17.99.

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Top-Rated Performance and Racing Products Brands For Your 1960 Chevrolet Brookwood

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1960 Chevrolet Brookwoods. Below you’ll find some of our best rated Performance and Racing Products from K&N, Edelbrock, and FEL-PRO Performance, and more. Performance and Racing Products from these brands that fit a 1960 Brookwood start at just $17.99 and are rated as high as 5 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1960 Chevrolet Brookwood Performance and Racing Products

When it comes to maintaining or upgrading your 1960 Chevrolet Brookwood, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1960 Chevrolet Brookwood. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 35 customer reviews and an average rating of 5 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Popular Edelbrock 1960 Chevrolet Brookwood Performance and Racing Products

Edelbrock auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1960 Chevrolet Brookwood owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1960 Brookwood, Advance Auto Parts carries a full inventory of 13 Edelbrock Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Edelbrock Performance and Racing Products range from $35.99 to $525.99, plus, with more than 10 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

Performer Small-Block Chevy Intake Manifold for Street Performance
from
$339.99
This product is not rated

Performer Small-Block Chevy Intake Manifold for Street Performance

“”

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
from
$65.99
This product is not rated

Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads

“”

FAQs for 1960 Chevrolet Brookwood Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1960 Chevrolet Brookwoods?

Out of 36 Performance and Racing Products that fit 1960 Chevrolet Brookwoods, the following parts are the top sellers:

What’s the price range for 1960 Chevrolet Brookwood Performance and Racing Products?

Performance and Racing Product prices for the 1960 Chevrolet Brookwood start at $12.99 and go up to $529.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1960 Chevrolet Brookwood?

The average price for Performance and Racing Products for the 1960 Chevrolet Brookwood is $155.27. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Brookwood model years?

Yes, we currently carry Performance and Racing Products for 7 model years of Chevrolet Brookwoods between 1958 and 1972. Performance and Racing Products are bought most frequently for the following model years: 1972, 1971, 1970, 1969, 1961, 1959, and 1958.

What are the cheapest Performance and Racing Products for my 1960 Chevrolet Brookwood?

The cheapest 1960 Chevrolet Brookwood Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1960 Chevrolet Brookwood?

Out of 101 reviews by customers, our 1960 Chevrolet Brookwood Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1960 Chevrolet Brookwood and their top-rated products:

Can I get help with 1960 Chevrolet Brookwood Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Brookwood Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Brookwood Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.