1959 Mercury Commuter Steering and Chassis Parts
More 1959 Mercury Commuter Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1959 Mercury Commuter, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1959 Mercury Commuter Steering and Chassis Parts
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Cardone New – Power Steering Pump (Part No.96-7058)
from
$258.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Cardone New – Power Steering Pump (Part No.96-6052)
from
$244.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Rare Parts – Ball Joint (Part No.RP10317)
from
$98.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Rare Parts – Ball Joint (Part No.RP10112)
from
$156.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Idler Arm Repair Kit (Part No.RP20343)
from
$369.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
Rare Parts – Idler Arm Repair Kit (Part No.RP20330)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
Powercraft – Pump Drive Shaft Seal Kit (Part No.8713)
from
$20.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Power Steering Repair Kit (Part No.8500)
from
$19.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
National – Multi Purpose Seal (Part No.8773S)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.6835S)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Cardone – Power Steering Power Cylinder (Part No.29-6729)
from
$181.99
CARDONE Power Cylinders are remanufactured to meet or exceed O.E. performance. All critical components are tested to ensure proper fit, function, and consistent quality.
Product Features:
See More
Product Features:
- Each Power Cylinder is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance
- Units are supplied with all new O.E. style seals and O-rings to eliminate chance of leaks
- Guaranteed fit and function
- Meets or exceeds O.E.M performance
Lares – Remanufactured Power Steering Cylinder (Part No.35)
from
$286.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Rare Parts – Tie Rod End (Part No.RP25687)
from
$126.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP25338)
from
$113.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Powercraft – Pump Seal Kit (Part No.7168)
from
$58.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8501)
from
$32.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$26.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-P038F)
from
$26.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Factory Air – Transmission Oil Cooler Replacement Hose (Part No.53015)
Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)
from
$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.
Product Features:
See More
Product Features:
- Medium-duty power steering oil cooler
- Size: 3/4″ x 2-1/2″ x 12″
- For vehicle with 3/8″ ID power steering return hose
- Removes destructive heat and helps prolong power steering system life
Rare Parts – Tie Rod Assembly (Part No.RP25672)
from
$193.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Popular 1959 Mercury Commuter Steering and Chassis Parts Categories
1959 Mercury Commuter Steering and Chassis Parts
You count on your 1959 Mercury Commuter to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 22 Steering and Chassis Parts ranging in price from $9.29 to $301.99, you’re sure to find everything you need for your 1959 Mercury Commuter.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 7 different brands like Imperial, National, and Powercraft. 1959 Mercury Commuter Steering and Chassis Parts start as low as $9.29!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 423 extensive product reviews on 1959 Mercury Commuter Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Power Cylinder Complete Rebuild Kit with 1.5 stars and Power Cylinder Piston Rod Seal Kit with 5.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1959 Mercury Commuter below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1959 Mercury Commuter
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 Mercury Commuter running right for years to come. In our inventory you’ll find brands like Imperial, National, Powercraft, and even more.
Popular National Steering and Chassis Parts
You’ll find popular National brand products across Steering Knuckles. All are waiting to get your 1959 Mercury Commuter back on the road. Some of the top-rated National products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1959 Mercury Commuter, and some of our most reviewed Imperial parts include:
FAQs for 1959 Mercury Commuter Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1959 Mercury Commuter?
Out of 22 Steering and Chassis Parts for the 1959 Mercury Commuter, the most popular in our inventory are:
What are the top-rated 1959 Mercury Commuter Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1959 Mercury Commuter based on customer reviews/ratings are:
from
$46.49
(2)
Power Cylinder Complete Rebuild Kit
“This looked to be a universal kit with many extra parts and no instructions”
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
