1959 GMC PM250 Engine Parts
More 1959 GMC PM250 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1959 GMC PM250, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1959 GMC PM250 Engine Parts
Felpro – Engine Valve Cover Gasket Set (Part No.VS 3460 A)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Sealed Power – Engine Valve Lifter (Part No.HT-951)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Driveworks – Oil Seal (Part No.S-9845)
from
$7.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Sealed Power – Engine Connecting Rod Bearing (Part No.1555CPA 10)
from
$13.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Steel-backed bronze alloy lining with overplate
- Popular for fatigue resistance & strength
- Provides conformability required for older apps
- Our standard material is comparable to competitors performance bearing
- Note – This material offers less resistance to wear & corrosion than other materials.
- Utilizes ISO & QS certified manufacturing
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)
from
$287.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)
from
$1575.99
The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai
Product Features:
See More
Product Features:
- Complete Pair For Mechanical Flat Tappet
- 64cc Combustion Chamber Volume
- 210cc Intake/75cc Exhaust Runner Volume
- 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.562 in. Deck Thickness
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
MAHLE Original – Fuel Pump Gasket (Part No.D27094)
from
$1.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
Dorman – Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each) (Part No.555-008)
from
$0.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set (Part No.OS 6412 C)
from
$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Felpro – Fuel Pump Bowl Gasket (Part No.773)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mr. Gasket – Oil Dipstick And Tube (Part No.6235)
from
$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.
Product Features:
See More
Product Features:
- Fits Chevy Small Block 1955-79 283-400 CID
- Block Mounted
- Chrome Plated Steel
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)
from
$155.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.
Product Features:
See More
Product Features:
- Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
- Nominally Rated At 200,000 Psi Tensile Strength
- These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
- Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)
from
$18.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.
Product Features:
See More
Product Features:
- Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
- Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
- Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
- Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
- Black Oxide
Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)
from
$169.99
Product Features:
See More
- Keyway Adjustable
- Double Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- 9-Keyway Setting Points
- For Chevys Opperating in 6500-8500 RPM Range
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Mr. Gasket – Aluminum Valve Cover (Part No.6854)
from
$179.99
High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.
Product Features:
See More
Product Features:
- Fits small block Chevy engines
- Polished cast aluminum construction
- Tall design cover for added rocker clearance
- Sold as a pair
- Stops Gasket From Moving
- A Perfect Fit
- Beautifully Polished To A High Luster
ARP Auto Racing – For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers (Part No.230-7003)
from
$7.29
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
- Hi-Volume
- 3.125″
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)
from
$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Edelbrock – SuprChrg (Part No.1551)
from
$3552.99
SuprChrg
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
Popular 1959 GMC PM250 Engine Parts Categories
1959 GMC PM250 Engine Parts
You count on your 1959 GMC PM250 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 67 Engine Parts ranging in price from $0.43 to $3,552.99, you’re sure to find everything you need for your 1959 GMC PM250.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 11 different brands like National, Sealed Power, and Mr. Gasket. 1959 GMC PM250 Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 49 extensive product reviews on 1959 GMC PM250 Engine Parts. Some of the top-rated Engine Parts products we carry are Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 with 5.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1959 GMC PM250 below to get started!
Top-Rated Engine Parts Brands For Your 1959 GMC PM250
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 GMC PM250 running right for years to come. In our inventory you’ll find brands like National, Sealed Power, Mr. Gasket, and even more.
Popular Sealed Power Engine Parts
You’ll find popular Sealed Power brand products across Valve Cover and Cylinder Heads. All are waiting to get your 1959 GMC PM250 back on the road. Some of the top-rated Sealed Power products in these categories are:
Top-Rated National Engine Parts
If National are what you’re looking for, our inventory holds plenty. We stock National brand Engine Parts for your 1959 GMC PM250, and some of our most reviewed National parts include:
FAQs for 1959 GMC PM250 Engine Parts
What are the most purchased Engine Parts for the 1959 GMC PM250?
Out of 67 Engine Parts for the 1959 GMC PM250, the most popular in our inventory are:
What are the top-rated 1959 GMC PM250 Engine Parts?
Top-rated Engine Parts for your 1959 GMC PM250 based on customer reviews/ratings are:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
from
$60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
from
$151.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”
