1959 GMC PM150 Fuel and Emissions Systems

Essential 1959 GMC PM150 Fuel and Emissions Systems

ARP Auto Racing – Chrome Moly (Part No.134-8701)

Chrome Moly

from

$22.79
Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:
  • Made From Premium Grade Aerospace Chrome Moly
  • Center Less Ground To Precise Diameter
  • Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
  • Provide With Required Reliability And Improved Performance
See More

Carquest Premium – Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10491)

Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Carquest Premium – Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10623)

Fuel Cap: 10623, Push In, Direct Fit, Provides Tight Seal, 1 Pack

from

$12.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Edelbrock – EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706 (Part No.1476)

EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706

from

$83.99


Product Features:
  • EGR Adapter
  • Clears OEM Intake
  • Includes Gaskets and Bolts
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Edelbrock – Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block (Part No.3627)

Fuel Injection Fuel Rail #3627, -6 AN Black Anodized For Chevrolet Small-Block

from

$211.99
All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:
  • Black AnodizedFinish
  • High Capacity Fuel Rails
  • For Use W/ Pro-Flo XT Manifold #7137
  • -6 AN Inlet / Outlet
  • Made In The USA
See More

Edelbrock – Victor Series fuel pump is for SBC and W Series Chevrolet (Part No.1711)

Victor Series fuel pump is for SBC and W Series Chevrolet

from

$174.99
High volume 0.5 inch NPT inlet and outlet. Large alcohol-proof diaphragm. Aircraft-type Allen bolts. Produces 10 psi. For gasoline only. Finest quality material. Beautifully detailed. Use with fuel pressure regulator PN(8190).

Product Features:
  • Hi-Vol 0.5 in. NPT Inlet/Outlet
  • Large Alcohol-Proof Diaphragm
  • Aircraft-Type Allen Bolts
  • Produces 10 psi
  • For Gasoline Only
  • Finest Quality Material
  • Beautifully Detailed
  • Use w/Fuel Pressure Regulator PN[8190]
See More

Mr. Gasket – Electric Fuel Pump (Part No.12S)

Electric Fuel Pump

from

$64.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Product Features:
  • Solid-state Worry Free Electronics
  • Internal Pressure Regulating
  • Universal Design Allows For Easy Installation
  • No DiaphraGMs Or Mechanical Parts To Wear Out
  • They Make An Excellent Fuel Transfer or Booster Pump
  • Not designed for use on aircraft of any type.
  • Hose Barbs Fit 5/16″ Fuel Hose
  • Self-priming, 2 wire design
  • Eliminates vapor lock and flooding
See More

ARP Auto Racing – For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers (Part No.430-1602)

For Use With Chevy, Hex Style Head Type, Polished, Stainless Steel, With Washers

from

$12.29
Make sure that mechanical fuel pumps stay properly aligned by using ARP durable black oxide finished chrome moly or rust proof stainless bolts(both materials are rated at 170,000 PSI and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12 point head. Washers are included.

Product Features:
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Properly Aligned
  • Conventional Hex Heads
  • Rust-Proof Stainless Bolts
  • 170,000 PSI
See More

1959 GMC PM150 Fuel and Emissions Systems

You count on your 1959 GMC PM150 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 9 Fuel and Emissions Systems ranging in price from $2.99 to $211.99, you’re sure to find everything you need for your 1959 GMC PM150.

Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 5 different brands like Felpro, Carquest Premium, and Mr. Gasket. 1959 GMC PM150 Fuel and Emissions Systems start as low as $2.99!

One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 207 extensive product reviews on 1959 GMC PM150 Fuel and Emissions Systems.

Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1959 GMC PM150 below to get started!

Top-Rated Fuel and Emissions Systems Brands For Your 1959 GMC PM150

Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 GMC PM150 running right for years to come. In our inventory you’ll find brands like Felpro, Carquest Premium, Mr. Gasket, and even more.

Popular Felpro Fuel and Emissions Systems

You’ll find popular Felpro brand products across Fuel Pumps. All are waiting to get your 1959 GMC PM150 back on the road. Some of the top-rated Felpro products in these categories are:
Fuel Pump Mounting Gasket
from $2.99
(26)
Fuel Pump Mounting Gasket
Fuel Pump Block-Off Plate Gaskets

Top-Rated Fuel and Emissions Systems


If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1959 GMC PM150, and some of our most reviewed parts include:
Electric Fuel Pump
from $64.99
(37)
Electric Fuel Pump
Fuel Pumps

FAQs for 1959 GMC PM150 Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 1959 GMC PM150?

Out of 9 Fuel and Emissions Systems for the 1959 GMC PM150, the most popular in our inventory are:
Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack
from $24.99
This product is not rated
Locking Fuel Cap: 10491, Push In, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706
from $83.99
This product is not rated
EGR Valve Adapter #1476 For Intake Manifold #3701 And #3706
EGR Valve Adapters