1959 GMC 150 Intake Manifold Parts
More 1959 GMC 150 Intake Manifold Parts
Find your specific 1959 GMC 150 original or aftermarket Intake Manifold Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1959 GMC 150 Intake Manifold Parts
Edelbrock – Performer Intake Manifold Small-Block Chevy (Part No.3701)
from
$339.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes and Accepts EGR
Edelbrock – Pro-Flo XT Small Block Chevy EFI Black Intake Manifold (Part No.71373)
from
$711.99
Edelbrock part #71373 Pro-Flo XT intake manifold is designed for 1957-86 small-block Chevy V8 applications. The Pro-Flo XT intakes are engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque throughout the rp
Product Features:
See More
Product Features:
- 1500-7000 RPM Range
- Single Plane Type-Throttle Body XT Style Flange
- 9 in. Front Height, 9 in. Center Height, 8.2 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish (Part No.27033)
from
$445.99
Edelbrock part #27033 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent thr
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.74 in. Front Height, 4.27 in. Center Height, 4.8 in. Rear Height
- Black Powder Coated Finish
- Non-EGR W/ Oil Fill Tube
Weiand – Pro-Street; Supercharger Intake Manifold (Part No.6150WIN)
Edelbrock – Performer RPM AIR-Gap Small Block Chevy Dual-Quad Intake Manifold (Part No.7525)
from
$484.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on C26 Low Profile with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- 1.625 in. Taller Than Low-Profile PN[5425]
- Also Available In EnduraShine Finish PN[75254]
- Also Available As Complete Kit PN[2025/20254]
- Best When Matched with Edelbrock 500cfm Carburetor
- Use Fuel Line Kit PN[8088/8091]
- Use Progressive Throttle Linkage Kit PN[7094]
Edelbrock – C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern (Part No.5419)
from
$473.99
Product Features:
See More
- Designed for Idle to 5500 RPM
- Manifold has a Balanced 180+ Firing Order
- Contains Exhaust Gas Heat Riser
- Offers Excellent Performance Potential
- Front Oil Filler Tube Boss Included
- Carburetor Center-to-Center Dimensions = 5-1/2 in
- Also Available Polished PN[5419] But Not Fit HEI
- Use Rochester 2GC (small 1-7/16 in bore)
Edelbrock – Performer RPM Small Block Chevy Polished Intake Manifold (Part No.71011)
from
$578.99Product Features:
- Polished Version Of Edelbrock PN[7101]
- Polish is Hand-Buffed for Brilliant Shine
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed for 1500 to 6500 RPM Street-Driven Power
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Performer EPS Intake Manifold for 1955-86 Small-Block Chevy (Part No.2701)
from
$195.99Product Features:
- Maximizes Performance with Edelbrock Carburetors
- Runners Tuned to Match Square Bore Carburetor
- Maximizes Peak Torque Around 3500 RPM
- Excellent Throttle Response and Mid-Range Power
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Prod. +5 HP and +9 ft/lbs. of Torque Over PN[2101]
Edelbrock – RPM Dual-Quad manifold and carb Kit for 1957-86 Small-Block Chevy (Part No.2025)
from
$1776.99
Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polished or endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Convert From Single To Dual-Quad Intake
- Produces Incredible Top-End Horsepower
- Edelbrock Total Power Package Maximizes Gains
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", Hex Style Head Type, Polished, Ss (Part No.434-2001)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
- 1″ Long
ARP Auto Racing – For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers (Part No.434-2101)
from
$46.49
Prevent intake manifold leaks with ARP quality fasteners. They are rated at 170,000 PSI and precision machined for optimum thread engagement. Wide under head flange and companion washers provide even load distribution. Precision rolled threads prevent galling while promoting more consistent torque loading. Facilitates optimum sealing of gasket surfaces. Available in choice of black oxide finish chrome moly or corrosion resistant stainless steel, as well as hex or 12 point heads.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength
- Precision Machined Threads For Secure Engagement, And Would not Rust
- Wide Under Head Flange And Companion Washers Provide Even Load Distribution
- Precision Rolled Threads Prevent Galling While Promoting More Consistent Torque Loading
- Facilitates Optimum Sealing Of Gasket Surfaces
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9498 SH-1)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9334 SH)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Felpro – Engine Intake Manifold Gasket Set (Part No.MS 9257 SH)
from
$22.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Includes all parts needed to complete the repair
- Includes all parts needed to complete the repair
Popular 1959 GMC 150 Intake Manifold Parts Categories
1959 GMC 150 Intake Manifold Parts
Maybe you’re in the middle of a full rebuild of that 1959 GMC 150. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 19 different Intake Manifold Parts in our inventory ranging from $22.49 to $1,776.99. That means you can find the exact parts or products you need to keep that 1959 GMC 150 running smoothly.
Intake Manifold Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1959 GMC 150. Edelbrock, ARP Auto Racing, and Felpro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Intake Manifold Parts for your 1959 GMC 150, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1959 GMC 150 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Intake Manifold Parts Brands To Make Your 1959 GMC 150 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1959 GMC 150 demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 150 the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.
Popular Edelbrock Intake Manifold Parts
We carry Edelbrock parts in our stock across Intake Manifolds categories, plus more. For a 1959 GMC 150, our most popular Edelbrock Intake Manifold Parts include:
FAQs for 1959 GMC 150 Intake Manifold Parts
What are the most purchased Intake Manifold Parts for the 1959 GMC 150?
Out of 19 Intake Manifold Parts for the 1959 GMC 150, the most popular in our inventory are:
from
$281.99
This product is not rated
Performer RPM Small Block Chevy Intake Manifold
Intake Manifolds
from
$46.49
This product is not rated
For Use With Chevy 265/ 400 Cubic", 12 Point Head Type, Polished, With Washers
Intake Manifold Bolt Sets
