1959 Dodge P320 Series Filters and PCVs

Essential 1959 Dodge P320 Series Filters and PCVs

Dorman – Oil Drain Plug Gasket – Nylon Fits 7/8 Inch M22 (sold by each) (Part No.097-005)

Oil Drain Plug Gasket - Nylon Fits 7/8 Inch M22 (sold by each)

from

$1.29
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Oil Drain Plug Gasket – Nylon Fits 1/2 Inch TO, 5/8 Inch M14 SO, M16 (sold by each) (Part No.097-002)

Oil Drain Plug Gasket - Nylon Fits 1/2 Inch TO, 5/8 Inch M14 SO, M16 (sold by each)

from

$7.99
These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:
  • Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
  • Restores functionality – built to restore a proper seal
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Fram – HD By-Pass Lube Cartridge (Part No.C134PL)

HD By-Pass Lube Cartridge

from

$9.29
Fram Cartridge Oil Filters are built to meet or exceed OE specifications.

Product Features:
  • Designed to deliver enhanced efficiency and capacity
See More

Carquest Premium – Cotton and Fiber By-Pass Lube Sock with Pull-Out Bail Handle (Part No.85011)

Cotton and Fiber By-Pass Lube Sock with Pull-Out Bail Handle

from

$33.49
Carquest sock-type lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Accufit – Oil Drain Plug, 5/8"-18 (Part No.ODP-00017B)

Oil Drain Plug, 5/8"-18

from

$5.29
AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:
  • Easy Install – Finger-grip wing for ease of installation
  • All plugs have 14mm hex – just one wrench works for all
  • Hi-Temp Gasket – Red hi-temp gasket for max sealing protection
See More

Dorman – Standard Engine Oil Drain Plug: 7/8-14 Thread, 1-1/8" Head (Sold by each) (Part No.090-010)

Standard Engine Oil Drain Plug: 7/8-14 Thread, 1-1/8" Head (Sold by each)

from

$16.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Oil Drain Plug Standard 5/8-18, Head Size 9/16 In. (Part No.65314)

Oil Drain Plug Standard 5/8-18, Head Size 9/16 In.

from

$7.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Standard Engine Oil Drain Plug: 5/8 " -18, Unified National Fine Thread, 9/16 " Head, 1 Pack (Part No.090-024CD)

Standard Engine Oil Drain Plug: 5/8 " -18, Unified National Fine Thread, 9/16 " Head, 1 Pack

from

$12.49
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

aFe POWER – Magnum FLOW Filter (Part No.10-10017)

Magnum FLOW Filter

from

$68.99
Magnum FLOW Filter

FRAM Drive – Engine Air Filter: Standard, Meets or Exceeds Manufacturer Specifications (Part No.FDA160)

Engine Air Filter: Standard, Meets or Exceeds Manufacturer Specifications

from

$11.29
FRAM Drive engine air filter prevents damaging road dust and dirt particles from entering your vehicle’s engine. Replacing your engine air filter every 12 months can help improve acceleration and optimizes overall engine efficiency.

Product Features:
  • Proven performance for up to 12 months
  • Installs quickly in as little as 5 minutes
  • Provides trusted protection by trapping dirt, dust, and other harmful contaminants
See More

aFe POWER – PRO DRY S Air Filter: 99.2% Filtration Efficiency, 3 Layer Synthetic, Dry Filter, Street Driving (Part No.11-10017)

PRO DRY S Air Filter: 99.2% Filtration Efficiency, 3 Layer Synthetic, Dry Filter, Street Driving

from

$68.99
Constructed with 100-percent polyurethane on top and bottom, this non-oiled OE replacement filter provides years of hassle free service. Three Layers of Progressive Synthetic (Dry) Media for Maximum Convenience. Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal insures tight, no leak seal over the life of the filter.

Product Features:
  • Outflows Stock Paper Filters For Improved Horsepower and Torque
  • 100% Polyurethane Frame On All Sides For Extra Long Filter Life
  • Washable And Reusable For Multiple Cleaning Cycles
  • Progressive Bump Seal Design For A Perfect Fit
See More

Fram – In-Line Gasoline Filter (Part No.G2)

In-Line Gasoline Filter

from

$4.49
Since 1934 FRAM has been a pioneer in the fields of automotive and non-automotive filtration. FRAM is committed to providing you and your vehicle with the very best in engine protection with premium, application-specific filtration products. FRAM’s dedication is backed by substantial, ongoing research in filtration media, filter design and manufacturing processes.

Product Features:
  • This high-volume accessory is designed to promote efficient fuel injection performance
  • Designed for use in modern fuel injection systems and with oxygenated fuels
See More

Fram – Fuel Filter: Standard, In-Line Fuel Filter (Part No.G12)

Fuel Filter: Standard, In-Line Fuel Filter

from

$4.49
Since 1934 FRAM has been a pioneer in the fields of automotive and non-automotive filtration. FRAM is committed to providing you and your vehicle with the very best in engine protection with premium, application-specific filtration products. FRAM’s dedication is backed by substantial, ongoing research in filtration media, filter design and manufacturing processes.

Product Features:
  • This high-volume accessory is designed to promote efficient fuel injection performance
  • Designed for use in modern fuel injection systems and with oxygenated fuels
See More

Carquest Premium – 3.4" HEIGHT – 2.064" METAL CANISTER FILTER (Part No.86271)

3.4" HEIGHT - 2.064" METAL CANISTER FILTER

from

$6.99
CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:
  • Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
  • Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
  • Provides maximum fuel system protection.
  • Designed to meet or exceed Original Equipment specifications
  • Protects the injectors from debris that cause damage and clogging.
  • Provides less restriction preventing the fuel pump from working too hard.
  • Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.
See More

1959 Dodge P320 Series Filters and PCVs

You count on your 1959 Dodge P320 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Filters and PCVs. With 11 Filters and PCVs ranging in price from $4.49 to $68.99, you’re sure to find everything you need for your 1959 Dodge P320 Series.

Brands matter. If you want to shop a specific Filters and PCVs brand, we stock 6 different brands like Carquest Premium, Dorman, and aFe POWER. 1959 Dodge P320 Series Filters and PCVs start as low as $4.49!

One of the best ways to find top quality OEM or aftermarket Filters and PCVs is by asking professionals. Short of that, you can shop with confidence thanks to our 1 extensive product reviews on 1959 Dodge P320 Series Filters and PCVs.

Did we mention you can order your Filters and PCVs from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Filters and PCVs inventory for your 1959 Dodge P320 Series below to get started!

Top-Rated Filters and PCVs Brands For Your 1959 Dodge P320 Series

Trusted Filters and PCVs OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1959 Dodge P320 Series running right for years to come. In our inventory you’ll find brands like Carquest Premium, Dorman, aFe POWER, and even more.

Popular Fram Filters and PCVs

You’ll find popular Fram brand products across Oil Filters. All are waiting to get your 1959 Dodge P320 Series back on the road. Some of the top-rated Fram products in these categories are:
HD By-Pass Lube Cartridge
from $9.29
(1)
HD By-Pass Lube Cartridge
Oil Filters

FAQs for 1959 Dodge P320 Series Filters and PCVs

What are the most purchased Filters and PCVs for the 1959 Dodge P320 Series?

Out of 11 Filters and PCVs for the 1959 Dodge P320 Series, the most popular in our inventory are:
3.4" HEIGHT - 2.064" METAL CANISTER FILTER
from $6.99
This product is not rated
3.4" HEIGHT – 2.064" METAL CANISTER FILTER
Fuel Filters