1959 Chevrolet Parkwood Belts and Hoses

Essential Belts and Hoses for 1959 Chevrolet Parkwoods

Gates – Premium Molded Coolant Hose (Part No.20338)

Premium Molded Coolant Hose

from

$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26612)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$41.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7590)

Automotive XL« High Capacity V-Belt

from

$27.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7508)

Automotive XL« High Capacity V-Belt

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit (Part No.7570)

Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

from

$32.99
Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

Gates – Automotive XL« High Capacity V-Belt (Part No.7575)

Automotive XL« High Capacity V-Belt

from

$32.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26611)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$34.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Premium Molded Coolant Hose (Part No.20345)

Premium Molded Coolant Hose

from

$21.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576796ACD)

Professional Molded Coolant Hose

from

$58.73
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Gates – Premium Molded Coolant Hose (Part No.20584)

Premium Molded Coolant Hose

from

$33.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot)

from

$1.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26502)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)

Vulco-Flex½ II Flexible Coolant Hose

from

$29.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25478)

Vulco-Flex« II Flexible Coolant Hose

from

$18.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Upgrade your 1959 Chevrolet Parkwood with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1959 Chevrolet Parkwood, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your Parkwood functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Belts and Hoses for the 1959 Chevrolet Parkwood, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Oil Cooler Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1959 Chevrolet Parkwood at great prices. Our Belts and Hoses inventory for this model ranges from just $1.49 to $87.99, with an average price of $29.79. Our 16 Belts and Hoses in stock come from 3 trusted brands, so you’re sure to find the right part for your 1959 Chevrolet Parkwood without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1959 Chevrolet Parkwood is always ready to roll. We’re committed to providing you with everything you need to keep your Parkwood in top shape, all in one place. Start shopping confidently below for your 1959 Chevrolet Parkwood!

Best-Selling Engine Cooling Hoses for 1959 Chevrolet Parkwoods

Enhance the driving experience in your Chevrolet with 7 quality Engine Cooling Hose components, starting at $1.49.

Gates – Premium Molded Coolant Hose (Part No.20584)

Premium Molded Coolant Hose

from

$33.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25478)

Vulco-Flex« II Flexible Coolant Hose

from

$18.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26612)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$41.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26502)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$29.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25476)

Vulco-Flex½ II Flexible Coolant Hose

from

$29.49
Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25480)

Vulco-Flex« II Flexible Coolant Hose

from

$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:
  • Improved sealing surface for greater leak resistance
  • High flexibility for easy installation
  • Maximum vehicle coverage with minimum inventory
  • Resistant to heat, oil and ozone
  • Rated for SAE 20R5 Class D-2 performance
  • Temperature Range: up to +257 Deg. F (+125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot)

from

$1.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Most Popular 1959 Chevrolet Parkwood Oil Cooler Hoses

Customize your Chevrolet with 2 Oil Cooler Hoses products like Engine Oil Cooler Hoses, all priced under $87.99.

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Top Picks for 1959 Chevrolet Parkwood Radiator Hoses

Upgrade Chevrolet Parkwoods with top-quality Radiator Hoses parts, including 4 OEM and aftermarket selections for your 1959 model.

ACDelco – Professional Molded Coolant Hose (Part No.G2000576796ACD)

Professional Molded Coolant Hose

from

$58.73
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26611)

Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose

from

$34.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
  • EPDM tube and Neoprene cover for extended service life
  • Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
  • Resistant to heat, oil and ozone
  • Performs to SAE 20R5 Type EC Class D-2 specifications
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • Caution: Do not use for fuel or oil transfer applications.
See More

Gates – Premium Molded Coolant Hose (Part No.20345)

Premium Molded Coolant Hose

from

$21.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

In-Demand Heater Hoses for 1959 Chevrolet Parkwoods

Select from 1 premium Heater Hoses parts for your 1959 Chevrolet Parkwood.

Gates – Premium Molded Coolant Hose (Part No.20338)

Premium Molded Coolant Hose

from

$9.79
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Sold 1959 Chevrolet Parkwood Serpentine and V Belts

Explore our best-selling Chevrolet parts for the 1959 Parkwood among 2 OEM and aftermarket options starting from $27.49.

Gates – Automotive XL« High Capacity V-Belt (Part No.7590)

Automotive XL« High Capacity V-Belt

from

$27.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7575)

Automotive XL« High Capacity V-Belt

from

$32.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

FAQs for 1959 Chevrolet Parkwood Belts and Hoses

Which Belts and Hoses are best-sellers for 1959 Chevrolet Parkwoods?

Out of 16 Belts and Hoses that fit 1959 Chevrolet Parkwoods, the following parts are the top sellers:

What’s the price range for 1959 Chevrolet Parkwood Belts and Hoses?

Belts and Hose prices for the 1959 Chevrolet Parkwood start at $1.49 and go up to $87.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1959 Chevrolet Parkwood?

The average price for Belts and Hoses for the 1959 Chevrolet Parkwood is $29.79. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet Parkwood model years?

Yes, we currently carry Belts and Hoses for 2 model years of Chevrolet Parkwoods between 1960 and 1961. Belts and Hoses are bought most frequently for the following model years: 1961 and 1960.

What are the cheapest Belts and Hoses for my 1959 Chevrolet Parkwood?

The cheapest 1959 Chevrolet Parkwood Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1959 Chevrolet Parkwood?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1959 Chevrolet Parkwood:

Can I get help with 1959 Chevrolet Parkwood Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet Parkwood Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet Parkwood Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.