1958 Porsche 356A Steering and Chassis Parts

Essential Steering and Chassis Parts for 1958 Porsche 356As

Febi – King Pin Repair Kit (Part No.L207114739FEB)

King Pin Repair Kit

from

$110.22
The Febi King Pin Repair Kit is OE Quality and is manufactured using only the highest quality materials. Installation Note: On some applications take note, as the upper and lower bushings are different lengths. After installation, the bushings must be honed to fit the pins.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Kit comes with the required bushings and pins
  • Meets or exceeds the OE specifications.
See More

Febi – Link Pin Repair Kit (Part No.M304514740FEB)

Link Pin Repair Kit

from

$207.02
Link Pin Repair Kit

Meyle – Meyle Tie Rod End (Part No.M301017013MEY)

Meyle Tie Rod End

from

$29.77
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019235LEM)

ZF/Lemfoerder Tie Rod End

from

$21.55
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019234LEM)

ZF/Lemfoerder Tie Rod End

from

$21.40
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

National – Bearings (Part No.30206)

Bearings

from

$22.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Sachs – Stabilus STAB-O-SHOC Steering Damper (Part No.M400031113SAC)

Stabilus STAB-O-SHOC Steering Damper

from

$57.81
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:
  • Damping forces up to 3000 N in tension and compression direction
  • Damping forces can be set independently of each other in both directions at the factory
  • Non-pressurized, no extension force
  • Positive, direct instant damping
See More

Upgrade your 1958 Porsche 356A with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1958 Porsche 356A, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Porsche or enhancing its overall performance, Steering and Chassis Parts are key to keeping your 356A functioning at its best. At Advance Auto Parts, we offer a wide selection of 7 Steering and Chassis Parts for the 1958 Porsche 356A, designed to meet your needs without breaking the bank. From Tie Rod replacements to King Pins upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1958 Porsche 356A at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $21.40 to $207.02, with an average price of $67.18. Our 7 Steering and Chassis Parts in stock come from 5 trusted brands, so you’re sure to find the right part for your 1958 Porsche 356A without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1958 Porsche 356A is always ready to roll. We’re committed to providing you with everything you need to keep your 356A in top shape, all in one place. Start shopping confidently below for your 1958 Porsche 356A!

Best-Selling Tie Rods for 1958 Porsche 356As

Enhance the driving experience in your Porsche with 3 quality Tie Rod components, starting at $21.40.

Meyle – Meyle Tie Rod End (Part No.M301017013MEY)

Meyle Tie Rod End

from

$29.77
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.

Product Features:
  • Original Equipment quality
  • Coated surface to prevent corrosion and rust
  • Fatigue tested for structural integrity
  • Precision made components for an ideal fit and function
  • Adjustable for proper alignment
  • Premium Polychloroprene rubber boots
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019235LEM)

ZF/Lemfoerder Tie Rod End

from

$21.55
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019234LEM)

ZF/Lemfoerder Tie Rod End

from

$21.40
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Most Popular 1958 Porsche 356A King Pins

Customize your Porsche with 2 King Pins products like King Pin Bolts, all priced under $207.02.

Febi – King Pin Repair Kit (Part No.L207114739FEB)

King Pin Repair Kit

from

$110.22
The Febi King Pin Repair Kit is OE Quality and is manufactured using only the highest quality materials. Installation Note: On some applications take note, as the upper and lower bushings are different lengths. After installation, the bushings must be honed to fit the pins.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Kit comes with the required bushings and pins
  • Meets or exceeds the OE specifications.
See More

Febi – Link Pin Repair Kit (Part No.M304514740FEB)

Link Pin Repair Kit

from

$207.02
Link Pin Repair Kit

Top Picks for 1958 Porsche 356A Steering Dampers

Upgrade Porsche 356As with top-quality Steering Dampers parts, including 1 OEM and aftermarket selections for your 1958 model.

Sachs – Stabilus STAB-O-SHOC Steering Damper (Part No.M400031113SAC)

Stabilus STAB-O-SHOC Steering Damper

from

$57.81
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.

Product Features:
  • Damping forces up to 3000 N in tension and compression direction
  • Damping forces can be set independently of each other in both directions at the factory
  • Non-pressurized, no extension force
  • Positive, direct instant damping
See More

In-Demand Steering Shafts for 1958 Porsche 356As

Select from 1 premium Steering Shafts parts for your 1958 Porsche 356A.

National – Bearings (Part No.30206)

Bearings

from

$22.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

FAQs for 1958 Porsche 356A Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1958 Porsche 356As?

Out of 7 Steering and Chassis Parts that fit 1958 Porsche 356As, the following parts are the top sellers:

What’s the price range for 1958 Porsche 356A Steering and Chassis Parts?

Steering and Chassis Part prices for the 1958 Porsche 356A start at $21.40 and go up to $207.02 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1958 Porsche 356A?

The average price for Steering and Chassis Parts for the 1958 Porsche 356A is $67.18. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Porsche 356A model years?

Yes, we currently carry Steering and Chassis Parts for 4 model years of Porsche 356As between 1955 and 1959. Steering and Chassis Parts are bought most frequently for the following model years: 1959, 1957, 1956, and 1955.

What are the cheapest Steering and Chassis Parts for my 1958 Porsche 356A?

The cheapest 1958 Porsche 356A Steering and Chassis Parts we carry in stock are:

What types of Steering and Chassis Parts do you sell for my 1958 Porsche 356A?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1958 Porsche 356A:

Can I get help with 1958 Porsche 356A Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Porsche Steering and Chassis Parts and more.

What is your return policy for Porsche 356A Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Porsche 356A Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.