1958 Plymouth Suburban Performance Engines
More 1958 Plymouth Suburban Performance Engines
Find your specific 1958 Plymouth Suburban original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1958 Plymouth Suburban Performance Engines
Edelbrock – Sure Seat Valve Springs for Chrysler 318-340-360 V8 1957-89 (Part No.5877)
from
$59.99
Product Features:
See More
- Non-Rotator Type
- 1.394 in. Outer Diameter
- 1.010 in. Inner Diameter
- 1.010 in. Coil Blind
- Set of 16
Competition Cams – Engine Valve Spring Kit (Part No.911-16)
from
$759.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757
Product Features:
See More
Product Features:
- Seat pressure: 122 lbs. @ 1.900″, Open Pressure: 309 lbs. @ 1.400″
- O.D.: 1.524″, I.D.: 1.110″
- Single valve springs with damper
Competition Cams – VALVE SPRINGS, 1.509" DUAL 1 ST (Part No.924-16)
from
$788.99
Dual Valve Springs from COMP Cams are manufactured from Super Clean wire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 112 lbs. @ 1.900″, Open Pressure: 355 lbs. @ 1.200″
- O.D.: 1.509″, I.D.: 0.697″
- Dual valve springs with damper
Edelbrock – RPM Air-Gap Small Block Chrysler Black Intake Manifold (Part No.75763)
from
$612.99
Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competit
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.9 in. Front Height, 5.35 in. Center Height, 5.8 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)
from
$397.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)
from
$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)
from
$27.49
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
Product Features:
See More
Product Features:
- Assures Accurate Torque App
- Prevents Galling Manifold
- Grade 5 Material
- Black Oxide Coasted
Mr. Gasket – High Performance Thermostat (Part No.4366)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Stainless Steel, Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – Intake Manifold Bolts (Part No.6091)
from
$32.09
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
Product Features:
See More
Product Features:
- Features 12-point Smaller-than-standard Bolt Head
- Thick Flat Washers Distribute Optimum Clamp Load
- Ideal Use Where Space Is Minimal On Race Manifolds
- Bolts And Washers Zinc Plated For Protection
- Zinc Plated For Protection
Popular 1958 Plymouth Suburban Performance Engines Categories
1958 Plymouth Suburban Performance Engines
Maybe you’re in the middle of a full rebuild of that 1958 Plymouth Suburban. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 7 different Performance Engines in our inventory ranging from $26.99 to $612.99. That means you can find the exact parts or products you need to keep that 1958 Plymouth Suburban running smoothly.
Performance Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Plymouth Suburban. Edelbrock and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1958 Plymouth Suburban, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1958 Plymouth Suburban rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1958 Plymouth Suburban Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Plymouth Suburban demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your Suburban the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Mr. Gasket Performance Engines
We carry Mr. Gasket parts in our stock across Performance Intake Manifold Hardware categories, plus more. For a 1958 Plymouth Suburban, our most popular Mr. Gasket Performance Engines include:
FAQs for 1958 Plymouth Suburban Performance Engines
What are the most purchased Performance Engines for the 1958 Plymouth Suburban?
Out of 7 Performance Engines for the 1958 Plymouth Suburban, the most popular in our inventory are:
from
$26.99
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
from
$397.99
This product is not rated
Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines
Performance Intake Manifolds
from
$612.99
This product is not rated
RPM Air-Gap Small Block Chrysler Black Intake Manifold
Performance Intake Manifolds
