1958 GMC S370 Engine Parts
More 1958 GMC S370 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1958 GMC S370, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1958 GMC S370 Engine Parts
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Mr. Gasket – Mls Head Gasket (Part No.3130G)
from
$111.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.
Product Features:
See More
Product Features:
- Gasket bore – 4.060″ Thickness – .040″
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
National – Shaft Repair Sleeve (Part No.99176)
from
$46.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)
from
$287.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)
from
$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)
from
$32.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for
Product Features:
See More
Product Features:
- Stamped Steel Material
- Comes W/ Front Crankshaft Seal Installed
- W/ Welded Reinforcement Plate
- Chrome Finish
- Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)
from
$369.99
There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.
Product Features:
See More
Product Features:
- Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
- Manufactured From 8740 Chrome Moly Steel
- Heat Treated To 200,000 Pounds Per Square Inch
- Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
- 200,000 PSI
- Sold As A Kit
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-54A)
from
$14.29
A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking
Product Features:
See More
Product Features:
- Manufactured from high quality materials for consistent durable wear
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
- Meets or exceeds original equipment specifications
ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)
from
$6.99
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
Mr. Gasket – Aluminum Valve Cover (Part No.6854)
from
$179.99
High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.
Product Features:
See More
Product Features:
- Fits small block Chevy engines
- Polished cast aluminum construction
- Tall design cover for added rocker clearance
- Sold as a pair
- Stops Gasket From Moving
- A Perfect Fit
- Beautifully Polished To A High Luster
Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (sold by each) (Part No.555-007)
from
$1.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each) (Part No.555-008)
from
$0.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Oil Seal (Part No.S-9845)
from
$7.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Fuel Pump Bowl Gasket (Part No.5019)
from
$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)
from
$169.99
Product Features:
See More
- Keyway Adjustable
- Double Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- 9-Keyway Setting Points
- For Chevys Opperating in 6500-8500 RPM Range
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)
from
$990.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 70cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
Felpro – Oil Pan Gasket Set: Cork-Rubber, 6 Piece Set (Part No.OS 6412 C)
from
$14.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)
Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Mr. Gasket – Oil Dipstick And Tube (Part No.6235)
from
$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.
Product Features:
See More
Product Features:
- Fits Chevy Small Block 1955-79 283-400 CID
- Block Mounted
- Chrome Plated Steel
Popular 1958 GMC S370 Engine Parts Categories
1958 GMC S370 Engine Parts
You count on your 1958 GMC S370 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 60 Engine Parts ranging in price from $0.43 to $3,552.99, you’re sure to find everything you need for your 1958 GMC S370.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 11 different brands like National, Mr. Gasket, and Felpro. 1958 GMC S370 Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 48 extensive product reviews on 1958 GMC S370 Engine Parts. Some of the top-rated Engine Parts products we carry are Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 with 5.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1958 GMC S370 below to get started!
Top-Rated Engine Parts Brands For Your 1958 GMC S370
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 GMC S370 running right for years to come. In our inventory you’ll find brands like National, Mr. Gasket, Felpro, and even more.
Popular Sealed Power Engine Parts
You’ll find popular Sealed Power brand products across Valve Cover and Cylinder Heads. All are waiting to get your 1958 GMC S370 back on the road. Some of the top-rated Sealed Power products in these categories are:
Top-Rated National Engine Parts
If National are what you’re looking for, our inventory holds plenty. We stock National brand Engine Parts for your 1958 GMC S370, and some of our most reviewed National parts include:
FAQs for 1958 GMC S370 Engine Parts
What are the most purchased Engine Parts for the 1958 GMC S370?
Out of 60 Engine Parts for the 1958 GMC S370, the most popular in our inventory are:
What are the top-rated 1958 GMC S370 Engine Parts?
Top-rated Engine Parts for your 1958 GMC S370 based on customer reviews/ratings are:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
from
$60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
from
$151.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”
