1958 GMC S300 Engine Parts

Essential 1958 GMC S300 Engine Parts

Felpro – Fuel Pump Bowl Gasket (Part No.773)

Fuel Pump Bowl Gasket

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)

Engine Crankshaft Seal Kit

from

$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16

from

$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 PSI
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • .800″ Adjuster Thread Length
  • 3/8-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application
See More

Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)

Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95

from

$151.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:
  • Complete Kit: Includes Retainers And Locks
  • Springs Made of Highest Quality Spring Wire
  • Springs Precision Wound To Close Tolerances
  • Includes Superior Quality Steel Retainers
  • Includes 7 deg. Heat-Treated Valve Stem Locks
  • Retainers and Locks Black Oxide Coated
  • Non-Rotator Style: Dyno Tested and Street Proven
  • Great Match to Edelbrock Camshaft Kit
See More

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-54A)

Stock Replacement Type Oil Pump Intermediate Shaft

from

$14.29
A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:
  • Manufactured from high quality materials for consistent durable wear
  • Precision engineered for optimum fit and function
  • Designed for long-life and worry-free performance
  • Meets or exceeds original equipment specifications
See More

Driveworks – Oil Seal (Part No.S-9845)

Oil Seal

from

$7.29
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7391 S)

Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts

from

$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
See More

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

Engine Harmonic Balancer Repair Sleeve

from

$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Made of stainless steel
  • Designed to prevent timing cover seal leaks
  • Takes up gaps caused by worn-out harmonic balancer shafts
See More

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

Victor-Link Adjustable True-Roller Timing Chain Set

from

$169.99
Product Features:
  • Keyway Adjustable
  • Double Roller Timing Chain Type
  • Induction Hardened Billet Steel Material
  • 9-Keyway Setting Points
  • For Chevys Opperating in 6500-8500 RPM Range
See More

ARP Auto Racing – For Use With Chevy Small Block, 13/16" Socket Size, 2.470" Under Head L (Part No.234-2501)

For Use With Chevy Small Block, 13/16" Socket Size, 2.470" Under Head L

from

$34.99
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:
  • Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
  • 1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
  • Delivers ARP Quality And Reliability
  • Made In USA
  • Sold Individually
  • 7/16″-20 RH Thread Size
  • 2.47″ Underhead Length
  • 200,000 PSI
See More

ARP Auto Racing – For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly (Part No.230-7001)

For Use With Chevy Small Block, Hex Head, Black Oxide, Chrome Moly

from

$6.99
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.

Product Features:
  • Nominally Rated At 170,000 Psi Tensile Strength To Provide You With Plenty Of Clamping Force
  • Premium Grade Oil Pump Stud
  • The Studs Come With Flat Washers And Nuts
  • Black Oxide Finished 8740
See More

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Valve Seat for S/B Chevy heads with 1.60" Valves

from

$18.99
Product Features:
  • Valve Seats
  • Performer Series
  • 50-State Street Legal
See More

MAHLE Original – Fuel Pump Gasket (Part No.D27094)

Fuel Pump Gasket

from

$1.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Mr. Gasket – Oil Dipstick And Tube (Part No.6235)

Oil Dipstick And Tube

from

$16.49
Mr. Gasket Oil Dipstick is similar in design to original equipment, it can be installed with simple hand tools.

Product Features:
  • Fits Chevy Small Block 1955-79 283-400 CID
  • Block Mounted
  • Chrome Plated Steel
See More

Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)

Rollin' Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8

from

$441.99
Product Features:
  • Hydraulic roller tappet style camshaft
  • Reduces friction and eliminates break-in problems
  • Reduces friction and eliminates break-in problems
  • Permit higher valve velocities for increased performance
  • Maintains good manifold vacuum and drivability
See More

Dorman – Rubber Expansion Plug 7/8 In. – Size Range 7/8 In. – 1 In. (sold by each) (Part No.570-004)

Rubber Expansion Plug 7/8 In. - Size Range 7/8 In. - 1 In. (sold by each)

from

$3.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Engine Valve Spring Retainer Keeper

from

$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:
  • Unsurpassed quality that you can trust
  • Uses leading edge materials
  • State-of-the-art manufacturing
  • Exacting tolerances
  • Meets or exceeds OEM specifications
See More

Mr. Gasket – Aluminum Valve Cover (Part No.6854)

Aluminum Valve Cover

from

$179.99
High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.

Product Features:
  • Fits small block Chevy engines
  • Polished cast aluminum construction
  • Tall design cover for added rocker clearance
  • Sold as a pair
  • Stops Gasket From Moving
  • A Perfect Fit
  • Beautifully Polished To A High Luster
See More

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile

from

$119.99
All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:
  • Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
  • Nominally Rated At 200,000 PSI Tensile Strength
  • These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
  • Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs
See More

Mr. Gasket – Engine Oil Pan (Part No.9425)

Engine Oil Pan

from

$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.

Product Features:
  • Small Block Chevy 283-350 1955-’79
  • Drivers Side Dipstick
  • OEM Style – Stock Depth & Capacity
See More

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

For Use With Chevy Small Block With Standard 2 Piece Cork Gasket

from

$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:
  • Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
  • Bolt Kits Come With Washers
  • Stud Kits Come Complete With A Special Locking
  • Easily Installed Without The Worry Of Cross-Threading
See More

Felpro – OIL PAN GASKET SET (Part No.OS 30191 C-3)

OIL PAN GASKET SET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome

from

$32.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:
  • Stamped Steel Material
  • Comes W/ Front Crankshaft Seal Installed
  • W/ Welded Reinforcement Plate
  • Chrome Finish
  • Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
See More

Edelbrock – Valve Cover Gasket Set for Chevrolet (Part No.7549)

Valve Cover Gasket Set for Chevrolet

from

$35.99
Product Features:
  • Valve Cover Gasket
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Engine Valve Stem Oil Seal Set

from

$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)

E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam

from

$891.99
Product Features:
  • 64cc combustion chamber with 200cc intake runner
  • 2.02 in. intake and 1.60 in. exhaust valves
  • Flat Tappet Camshaft Type
  • Exhaust And Intake 45 Degree Seat Angle
  • Sold as one complete head
See More

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet

from

$287.99
Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)

TIMING COVER GASKET SET

from

$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

1958 GMC S300 Engine Parts

You count on your 1958 GMC S300 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 60 Engine Parts ranging in price from $0.43 to $3,552.99, you’re sure to find everything you need for your 1958 GMC S300.

Brands matter. If you want to shop a specific Engine Parts brand, we stock 11 different brands like National, Mr. Gasket, and Felpro. 1958 GMC S300 Engine Parts start as low as $0.43!

One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 48 extensive product reviews on 1958 GMC S300 Engine Parts. Some of the top-rated Engine Parts products we carry are Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 with 5.0 stars.

Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1958 GMC S300 below to get started!

Top-Rated Engine Parts Brands For Your 1958 GMC S300

Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 GMC S300 running right for years to come. In our inventory you’ll find brands like National, Mr. Gasket, Felpro, and even more.

Popular Sealed Power Engine Parts

You’ll find popular Sealed Power brand products across Valve Cover and Cylinder Heads. All are waiting to get your 1958 GMC S300 back on the road. Some of the top-rated Sealed Power products in these categories are:
Engine Valve Spring Retainer Keeper
from $0.43
(2)
Engine Valve Spring Retainer Keeper
Engine Valve Locks

Top-Rated National Engine Parts


If National are what you’re looking for, our inventory holds plenty. We stock National brand Engine Parts for your 1958 GMC S300, and some of our most reviewed National parts include:
Multi Purpose Seal
from $12.99
(15)
Multi Purpose Seal
Crankshaft Seals
Engine Harmonic Balancer Repair Sleeve
from $18.99
(5)
Engine Harmonic Balancer Repair Sleeve
Timing Cover Seals

FAQs for 1958 GMC S300 Engine Parts

What are the most purchased Engine Parts for the 1958 GMC S300?

Out of 60 Engine Parts for the 1958 GMC S300, the most popular in our inventory are:
Oil Dipstick And Tube
from $16.49
(11)
Oil Dipstick And Tube
Engine Oil Dipsticks
Oil Seal
from $7.29
(2)
Oil Seal
Crankshaft Seals
Engine Valve Stem Oil Seal Set
from $15.49
(1)
Engine Valve Stem Oil Seal Set
Engine Valve Stem Seals

What are the top-rated 1958 GMC S300 Engine Parts?

Top-rated Engine Parts for your 1958 GMC S300 based on customer reviews/ratings are:
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
from $287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
from $60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
from $151.99
(1)
Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95
“Excellent product.”