1958 GMC PM253 Engine Parts
More 1958 GMC PM253 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 1958 GMC PM253, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 1958 GMC PM253 Engine Parts
ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)
from
$37.49
The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.
Product Features:
See More
Product Features:
- Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
- Bolt Kits Come With Washers
- Stud Kits Come Complete With A Special Locking
- Easily Installed Without The Worry Of Cross-Threading
National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Made of stainless steel
- Designed to prevent timing cover seal leaks
- Takes up gaps caused by worn-out harmonic balancer shafts
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$60.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Mr. Gasket – Engine Oil Pan (Part No.9425)
from
$108.99
This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.
Product Features:
See More
Product Features:
- Small Block Chevy 283-350 1955-’79
- Drivers Side Dipstick
- OEM Style – Stock Depth & Capacity
Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)
Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)
from
$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)
from
$15.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
- QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
- ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
- INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
- COVERAGE — Available for domestic and foreign nameplate vehicles
Dorman – Help – Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (Part No.02602)
from
$7.99
Our uniquely designed pilot seal expansion plugs ensure a leak-proof fit.
Product Features:
See More
Product Features:
- Many sizes available
- Conveniently available in packs of different quantities
- Constructed from high quality steel, copper, brass, or rubber
- Dorman’s Engine Expansion Plugs are constructed to strict engineering quality standards
Cloyes Gear – Engine Timing Chain (Part No.C165)
from
$28.99
A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
Product Features:
See More
Product Features:
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
- CAD designed and manufactured using premium materials
- Refer to our online catalog for detailed application-specific information
- Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.
Felpro – Fuel Pump Bowl Gasket (Part No.5019)
from
$1.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)
from
$990.99
Product Features:
See More
- Out-of-the-Box Bolt-On Performance
- With Straight Plugs
- 70cc Combustion Chambers Improve Performance
- Retain Stock Compression Ratio
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 PSI Tensile Strength
- High Performance Head Bolts Are Stronger
Cloyes Gear – Engine Timing Camshaft Gear (Part No.2514)
from
$49.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain gears offer reliability and dependability for engine rebuilds and typical replacement jobs
- Helical tooth form for quiet operation and precision machined bore for true fit
- CAD designed and manufactured using premium materials to ensure optimal performance
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 PSI
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- .800″ Adjuster Thread Length
- 3/8-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application
Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)
from
$21.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
ARP Auto Racing – For Use With Small/ Big Block Chevy, Hex Head, Black Oxide, With Nuts/ Washers (Part No.230-7003)
from
$7.29
you have probably heard many a horror story about someone losing an engine when the oil pump fell off into the pan because of a broken bolt. Well, you can put your mind at ease when using ARP premium grade oil pump bolt and stud kits. You have a choice of black oxide finished 8740 chrome moly steel or low maintenance stainless steel. Both are nominally rated at 170,000 PSI tensile strength to provide you with plenty of clamping force. Moreover, take your pick between conventional hex style or 12 point designs. This is insurance that no conscientious engine builder should be without The studs come with flat washers and nuts, while the Ford bolt kit has flat washers only. These inexpensive fasteners can literally save your engine.
Product Features:
See More
Product Features:
- Nominally Rated At 170,000 PSI Tensile Strength To Provide You With Plenty Of Clamping Force
- Premium Grade Oil Pump Stud
- The Studs Come With Flat Washers And Nuts
- Black Oxide Finished 8740
- Hi-Volume
- 3.125″
Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)
from
$32.99
Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for
Product Features:
See More
Product Features:
- Stamped Steel Material
- Comes W/ Front Crankshaft Seal Installed
- W/ Welded Reinforcement Plate
- Chrome Finish
- Ideal For Preventing Camshaft Walk When Used W/ Thrust Button
Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)
from
$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Contains all the parts needed to complete the repair unless otherwise noted
- Contains all the parts needed to complete the repair unless otherwise noted
Dorman – Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each) (Part No.555-008)
from
$0.99
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Edelbrock – SuprChrg (Part No.1551)
from
$3552.99
SuprChrg
Mr. Gasket – Aluminum Valve Cover (Part No.6854)
from
$179.99
High quality valve covers that help you solve rocker clearance issues. Great for when you just can’t seem to stop those thin steel ones from leaking oil. Good for high performance street, drag and oval track racing. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. These Mr. Gasket covers are precision die cast for light weight and a perfect fit.
Product Features:
See More
Product Features:
- Fits small block Chevy engines
- Polished cast aluminum construction
- Tall design cover for added rocker clearance
- Sold as a pair
- Stops Gasket From Moving
- A Perfect Fit
- Beautifully Polished To A High Luster
ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)
from
$316.99
ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.
Product Features:
See More
Product Features:
- 1/2″ 12-Point, 3/16″ Allen Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Small Block Chevy
- Sold As A Kit
Cloyes Gear – Engine Timing Set (Part No.C-3043)
from
$95.99
Timing Set includes all components for a quick and efficient replacement
Product Features:
See More
Product Features:
- Utilizes the latest in design and technology to offer complete chain sets
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Utilizes the latest in design and technology to offer complete chain sets
- Refer to our online catalog for detailed application-specific information
- Set Includes: Cam Sprocket, Crankshaft Sprocket, Timing Chain
Felpro – Cylinder Head Gasket: Fiber-Faced Composite, Without Head Bolts (Part No.7391 S)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
Felpro – Engine Valve Cover Gasket Set (Part No.VS 3460 A)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S295)
from
$29.99
Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
Product Features:
See More
Product Features:
- Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
- Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
- CAD designed and manufactured using premium materials
- Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
- Refer to our online catalog for detailed application-specific information
Felpro – Engine Oil Pump Gasket (Part No.12172)
from
$1.39
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Popular 1958 GMC PM253 Engine Parts Categories
1958 GMC PM253 Engine Parts
You count on your 1958 GMC PM253 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 76 Engine Parts ranging in price from $0.43 to $3,552.99, you’re sure to find everything you need for your 1958 GMC PM253.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 10 different brands like National, Dorman, and Mr. Gasket. 1958 GMC PM253 Engine Parts start as low as $0.43!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 52 extensive product reviews on 1958 GMC PM253 Engine Parts. Some of the top-rated Engine Parts products we carry are Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet with 3.8 stars and Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each) with 5.0 stars.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 1958 GMC PM253 below to get started!
Top-Rated Engine Parts Brands For Your 1958 GMC PM253
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 GMC PM253 running right for years to come. In our inventory you’ll find brands like National, Dorman, Mr. Gasket, and even more.
Popular Sealed Power Engine Parts
You’ll find popular Sealed Power brand products across Valve Cover and Cylinder Heads. All are waiting to get your 1958 GMC PM253 back on the road. Some of the top-rated Sealed Power products in these categories are:
Top-Rated National Engine Parts
If National are what you’re looking for, our inventory holds plenty. We stock National brand Engine Parts for your 1958 GMC PM253, and some of our most reviewed National parts include:
FAQs for 1958 GMC PM253 Engine Parts
What are the most purchased Engine Parts for the 1958 GMC PM253?
Out of 76 Engine Parts for the 1958 GMC PM253, the most popular in our inventory are:
from
$7.99
(2)
Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In.
Timing Cover Plugs
What are the top-rated 1958 GMC PM253 Engine Parts?
Top-rated Engine Parts for your 1958 GMC PM253 based on customer reviews/ratings are:
from
$287.99
(4)
Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet
“I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and ”
from
$3.99
(2)
Rubber Expansion Plug 1-3/8 In. – Size Range 1-3/8 In. – 1-1/2 In. (sold by each)
“These worked great for making a skidoo secondary clutch tool.”
from
$60.99
(2)
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
“Used with the smallest Comp Thumpr Cam, good to 5500 RPM, Cost is great, No valve float. I would use again with a samll to medium cam and 416 heads.”
