1958 GMC PM250 Engine Parts

Below you will find various in-demand GMC Engine Parts, components and accessories for your 1958 PM250. Advance Auto Parts has popular PM250 parts like Engine Gaskets and Seals, Engine Internals, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other PM250 model years including 1955, 1956, 1957, 1959 and more. Select a category of 1958 GMC PM250 Engine Parts below and start saving instantly.

Popular 1958 GMC PM250 Engine Parts Categories

Valve Cover Gaskets

Oil Pan Gaskets

Rear Main Seal Sets

Cylinder Head Bolt Sets

Timing Covers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Oil Pans

Cylinder Head Gaskets

Engine Camshaft Bolts

Timing Cover Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Engine Valve Stem Seals

Camshafts

Camshaft and Lifter Kits

Engine Oil Pump Cover Gaskets

Fuel Pump Gaskets

Fuel Pump Bowl Gaskets

Engine Valve Locks

Engine Valve Seats

Cylinder Heads

Engine Cylinder Head Nuts

Engine Oil Deep Sump Kits

Engine Timing Cover Bolt Sets

Essential Engine Parts for 1958 GMC PM250s

from

$68.99

Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under head radius and rolled threads for the utmost reliability. The threads are rolled after heat treating, which makes them about 1000 Percent longer fatigue life than most main bolts, which are threaded prior to heat treating. Available in the popular High Performance Series, which, at a nominal rating of 180,000 PSI, is a premium replacement for OEM fasteners, or the 200,000 PSI nominal rated Pro Series, application specific main bolts with reduced wrenching head and are designed for use in competition applications. Parallel ground, hardened washers are included with each kit.

Product Features:

Forged From Premium Grade 8740 Chrome Moly Steel
Generous Under Head Radius And Rolled Threads For The Utmost Reliability
Threads Are Rolled After Heat Treating, Which Makes Them About 1000 Percent Longer Fatigue Life Than Most Main Bolts, Which Are Threaded Prior To Heat Treating
Parallel Ground, Hardened Washers Are Included With Each Kit
Large Journal
Sold As A Kit
180,000 PSI

from

$18.99

Product Features:

Valve Seats
Performer Series
50-State Street Legal

from

$1.39

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$198.99

Product Features:

Non-Rotator Type
1.540 in. Outer Diameter
0.760 in. Inner Diameter
0.760 in. Coil Blind
Set of 16

from

$78.99

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$5.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$7.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$19.99

Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:

Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
Made From Premium Grade 8740 And Heat Treated To 190,000 Psi
Alignment Sleeve Is Roll Formed Onto The Shaft (Not Welded Or Pinned), Enabling The Sleeve To Float, Allowing For Slight Misalignment
Black Oxide

from

$12.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$32.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$1.49

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models.
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$112.99

All Pro Series bolts are cold forged to ensure molecular integrity, heat treated prior to thread rolling and machining, and are rated at 200,000 PSI tensile strength. ARP Pro Series head bolt kits are application specific, designed for use with typically competition only components. These fasteners deliver superior strength and meet the ARP zero defect zero failure quality standard. Hardened and parallel ground washers are included with each kit to ensure even load distribution and accurate torque readings. All Pro Series head bolts have a reduced wrenching hex or 12 point head and wide area flange to eliminate the need for valve train removal for cylinder head retorquing and permits the use of larger diameter valve springs. Most applications have undercut short bolts that can help eliminate head gasket failures through providing more stretch to compensate for the additional compression of gaskets.

Product Features:

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 PSI Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$169.99

Product Features:

Keyway Adjustable
Double Roller Timing Chain Type
Induction Hardened Billet Steel Material
9-Keyway Setting Points
For Chevys Opperating in 6500-8500 RPM Range

from

$298.99

ARP only uses premium grade 8740 alloy and a proprietary ARP2000 alloy that are rated for superior to “aircraft” quality alloy steels. Secondly, each stud is placed vertically into special racks and precisely heat-treated to 200,000 psi for the 8740 material and 220,000 psi for the ARP2000 material. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$1.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$287.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$46.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$77.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$0.43

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$22.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$28.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$108.99

This Mr. Gasket Oil Pan comes natural unfinished steel and includes the drain plug, washers & bolts. Original equipment style with stock depth and capacity. Oil pan gasket, dipstick and tube sold separately.

Product Features:

Small Block Chevy 283-350 1955-’79
Drivers Side Dipstick
OEM Style – Stock Depth & Capacity

from

$31.99

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
Bolt Kits Come With Washers
Stud Kits Come Complete With A Special Locking
Easily Installed Without The Worry Of Cross-Threading

from

$114.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.035 inch: Compressed thickness – .040 inch
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

from

$111.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.060″ Thickness – .040″
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

Upgrade your 1958 GMC PM250 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1958 GMC PM250, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Engine Parts are key to keeping your PM250 functioning at its best. At Advance Auto Parts, we offer a wide selection of 62 Engine Parts for the 1958 GMC PM250, designed to meet your needs without breaking the bank. From Engine Gaskets and Seal replacements to Engine Internals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1958 GMC PM250 at great prices. Our Engine Parts inventory for this model ranges from just $0.43 to $1,575.99, with an average price of $151.50. Our 62 Engine Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 1958 GMC PM250 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1958 GMC PM250, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Mr. Gasket, and more. FELPRO Engine Parts start at just $1.29 and boast an impressive 5 stars average rating from customers. National and Mr. Gasket also bring quality to the table, with Engine Parts available starting at $12.99, and at an average 4 stars rating. With 127 customer reviews and counting, our 1958 GMC PM250 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1958 GMC PM250 is always ready to roll. We’re committed to providing you with everything you need to keep your PM250 in top shape, all in one place. Start shopping confidently below for your 1958 GMC PM250!

Best-Selling Engine Gaskets and Seals for 1958 GMC PM250s

Enhance the driving experience in your GMC with 12 quality Engine Gaskets and Seal components, starting at $1.29.

show more show less

from

$2.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$15.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$1.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$1.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$22.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$19.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$1.39

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$24.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$2.79

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Most Popular 1958 GMC PM250 Engine Internals

Customize your GMC with 6 Engine Internals products like Crankshaft Seals and Crankshaft Bolts, all priced under $329.99.

show more show less

from

$7.29

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$31.99

As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 PSI bolts that let you exert maximum clamping force. Special features include 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:

Ultra Strong Bolt Rated At 200,000 PSI
1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
Delivers ARP Quality And Reliability
Made In USA
12-Point Head
Sold Individually
200,000 PSI
2.470″ Underhead Length

from

$68.99

Forged From Premium Grade 8740 Chrome Moly Steel
Generous Under Head Radius And Rolled Threads For The Utmost Reliability
Threads Are Rolled After Heat Treating, Which Makes Them About 1000 Percent Longer Fatigue Life Than Most Main Bolts, Which Are Threaded Prior To Heat Treating
Parallel Ground, Hardened Washers Are Included With Each Kit
Large Journal
Sold As A Kit
180,000 PSI

from

$329.99

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.

Product Features:

Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
Manufactured From 8740 Chrome Moly Steel
Heat Treated To 200,000 Pounds Per Square Inch
Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
200,000 PSI
Sold As A Kit

from

$36.99

As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:

Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
1/4 Inch Thick, Wide Area Washer And An Extra Tall 12 Point Head That Accepts A Deep Socket And Eliminates The Worry Of Stripping The Head
Delivers ARP Quality And Reliability
Made In USA
Sold Individually
7/16″-20 RH Thread Size
2.47″ Underhead Length
200,000 PSI

Top Picks for 1958 GMC PM250 Valve Cover and Cylinder Heads

Upgrade GMC PM250s with top-quality Valve Cover and Cylinder Heads parts, including 22 OEM and aftermarket selections for your 1958 model.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$60.99

Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.

Product Features:

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$990.99

Product Features:

Out-of-the-Box Bolt-On Performance
With Straight Plugs
70cc Combustion Chambers Improve Performance
Retain Stock Compression Ratio

from

$891.99

Product Features:

64cc combustion chamber with 200cc intake runner
2.02 in. intake and 1.60 in. exhaust valves
Flat Tappet Camshaft Type
Exhaust And Intake 45 Degree Seat Angle
Sold as one complete head

from

$112.99

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 PSI Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$111.99

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.brbrA typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

Gasket bore – 4.060″ Thickness – .040″
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

from

$78.99

Made Of 8740 Chrome Moly Forgings
Heat Treated To 180,000 PSI
Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
Lengths Are Exact Designed To Provide Positive Seating Every Time
Set of 16
.800″ Adjuster Thread Length
3/8-24 Shank Diameter and Thread
3/8″ Typical Small Block Application

from

$106.99

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 PSI Tensile Strength
High Performance Head Bolts Are Stronger

from

$164.99

Pro Series Bolts Are Cold Forged To Ensure Molecular Integrity, Heat Treated Prior To Thread Rolling And Machining
Nominally Rated At 200,000 Psi Tensile Strength
These Fasteners Deliver Superior Strength And Meet The ARP Zero Defect Zero Failure Quality Standard
Bolts Have A Reduced Wrenching Hex Or 12 Point Head And Wide Area Flange To Eliminate The Need For Valve Train Removal For Cylinder Head Retorquing And Permits The Use Of Larger Diameter Valve Springs

from

$1575.99

The Edelbrock #5087 E-210 Cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased ai

Product Features:

Complete Pair For Mechanical Flat Tappet
64cc Combustion Chamber Volume
210cc Intake/75cc Exhaust Runner Volume
2.08 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1268.99

The Edelbrock #5073 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
70cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1229.99

The Edelbrock #5089 E-Street cylinder heads are designed for use with 1955-1986 Small-Block Chevy applications. The Edelbrock E-Street cylinder heads offer American made quality and affordable performance. E-Street cylinder heads feature as-cast ports and

Product Features:

Complete Pair For Hydraulic Flat Tappet
64cc Combustion Chamber Volume
2.02cc Intake/60cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$1024.99

The Edelbrock #60735 Performer RPM cylinder head is designed for 1955-86 Small-Block Chevy applications. The Edelbrock #60735 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performa

Product Features:

Complete Single For Mechanical Flat Tappet
70cc Combustion Chamber Volume
195cc Intake/65cc Exhaust Runner Volume
2.02 in. Intake/1.6 in. Exhaust Valve Diameter
0.562 in. Deck Thickness

from

$298.99

1/2″ 12-Point, 3/16″ Allen Socket Size(s)
8740 Chromoly
Black Oxide
Small Block Chevy
Sold As A Kit

from

$252.99

High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
Rated At 180,000 Psi Tensile Strength
High Performance Head Bolts Are Stronger

from

$198.99

Product Features:

Non-Rotator Type
1.540 in. Outer Diameter
0.760 in. Inner Diameter
0.760 in. Coil Blind
Set of 16

from

$152.99

For Use With Cast Iron Heads
Springs Made of Highest Quality Spring Wire
Springs Precision Wound To Close Tolerances
Use with Original Equipment Heads Only

from

$151.99

The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:

Non-Rotator Type
1.460 in. Outer Diameter
1.060 in. Inner Diameter
1.060 in. Coil Blind
Set of 16

from

$147.99

The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:

Non-Rotator Type
1.460 in. Outer Diameter
Made In The USA
Single Coil Spring Type
Set of 16

from

$114.99

Gasket bore – 4.035 inch: Compressed thickness – .040 inch
Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
Optimized sealing embossments seals extreme cylinder pressure
Provides excellent stability and reduces cylinder bore distortion.
Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
For high-performance street, drag race and oval track use

from

$77.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
Contains all the parts needed to complete the repair unless otherwise noted
Contains all the parts needed to complete the repair unless otherwise noted

from

$18.99

Product Features:

Valve Seats
Performer Series
50-State Street Legal

In-Demand Engine Timing Parts for 1958 GMC PM250s

Select from 8 premium Engine Timing Parts parts for your 1958 GMC PM250, with prices ranging from $12.99 to $169.99.

show more show less

from

$18.99

Made of stainless steel
Designed to prevent timing cover seal leaks
Takes up gaps caused by worn-out harmonic balancer shafts

from

$41.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$12.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$28.99

Includes timing cover seal and harmonic balancer sleeve
Solves the oil leaking around timing cover seal
Made of stainless steel
Takes up gaps caused by worn-out harmonic balancer shafts

from

$32.99

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$16.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly

from

$15.99

ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant.

Product Features:

Made From Black Oxide Finished 8740 Chrome Moly
Nominally Rated At 170,000 Psi Tensile Strength
Super Tough Bolts
Compact 12 Point Fasteners

from

$169.99

Product Features:

Keyway Adjustable
Double Roller Timing Chain Type
Induction Hardened Billet Steel Material
9-Keyway Setting Points
For Chevys Opperating in 6500-8500 RPM Range

Most Sold 1958 GMC PM250 Camshafts

Explore our best-selling GMC parts for the 1958 PM250 among 5 OEM and aftermarket options starting from $5.99.

show more show less

from

$287.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$366.99

Product Features:

Designed for 1500 to 6500 Performance
Maximum Power in High-RPM with Good Low-End Torque
Matched to Edelbrock Performer RPM Intakes
10 to 12 in. of Manifold Vacuum at Idle
More Lift and Duration than Most Street Camshafts
Includes Hydraulic Lifters and Assembly Lube
Dyno Matched/Street Proven Performance
Take The Guesswork Out Of Camshaft Selection

from

$441.99

Product Features:

Hydraulic roller tappet style camshaft
Reduces friction and eliminates break-in problems
Reduces friction and eliminates break-in problems
Permit higher valve velocities for increased performance
Maintains good manifold vacuum and drivability

from

$46.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$5.99

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

Top-Rated Engine Parts Brands For Your 1958 GMC PM250

Shop for the best-rated brands offering Engine Parts and other products for your 1958 GMC PM250s. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Mr. Gasket, and more. Engine Parts from these brands that fit a 1958 PM250 start at just $1.29 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1958 GMC PM250 Engine Parts

When it comes to maintaining or upgrading your 1958 GMC PM250, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1958 GMC PM250. With over 12 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.29, with an average price of just $17.24. Plus, with over 27 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$21.49

This product is not rated

OIL PAN GASKET SET

“”

from
$1.29

This product is not rated

Fuel Pump Bowl Gasket

“”

from
$1.99

This product is not rated

Fuel Pump Bowl Gasket

“”

Popular National 1958 GMC PM250 Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 1958 GMC PM250 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1958 PM250, Advance Auto Parts carries a full inventory of 5 National Engine Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these National Engine Parts range from $12.99 to $46.49, plus, with more than 21 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$46.49

This product is not rated

Shaft Repair Sleeve

“”

from
$28.99

This product is not rated

Engine Harmonic Balancer Kit

“”

from
$18.99

(5)

Engine Harmonic Balancer Repair Sleeve

“Simple device. Durable. Easy to install”

FAQs for 1958 GMC PM250 Engine Parts

Which Engine Parts are best-sellers for 1958 GMC PM250s?

Out of 62 Engine Parts that fit 1958 GMC PM250s, the following parts are the top sellers:

Multi Purpose Seal (3271684) – $12.99
Oil Dipstick And Tube (5022673) – $16.49
Engine Harmonic Balancer Repair Sleeve (18445039) – $18.99

What’s the price range for 1958 GMC PM250 Engine Parts?

Engine Part prices for the 1958 GMC PM250 start at $0.43 and go up to $1,575.99 for the most premium parts.

What’s the average price of a Engine Part for a 1958 GMC PM250?

The average price for Engine Parts for the 1958 GMC PM250 is $151.50. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other GMC PM250 model years?

Yes, we currently carry Engine Parts for 4 model years of GMC PM250s between 1955 and 1959. Engine Parts are bought most frequently for the following model years: 1959, 1957, 1956, and 1955.

What are the cheapest Engine Parts for my 1958 GMC PM250?

The cheapest 1958 GMC PM250 Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 9/16 In., Height 0.250 (sold by each) (22146591) – $0.99
Fuel Pump Bowl Gasket (18180003) – $1.29
Engine Oil Pump Gasket (19780039) – $1.39
Steel Cup Expansion Plug 13.70mm, Height 0.180 (sold by each) (22146590) – $1.49

What are the top-rated Engine Parts that fit the 1958 GMC PM250?

Out of 127 reviews by customers, our 1958 GMC PM250 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1958 GMC PM250 and their top-rated products:

Engine Internals
- Oil Seal (5440750) – $7.29
Valve Cover and Cylinder Heads
- Oil Seal (5440750) – $7.29
Engine Gaskets and Seals
- Oil Seal (5440750) – $7.29

What types of Engine Parts do you sell for my 1958 GMC PM250?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 1958 GMC PM250:

Can I get help with 1958 GMC PM250 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Engine Parts and more.

What is your return policy for GMC PM250 Engine Parts?

Advance Auto Parts keeps returns simple. For new GMC PM250 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1958 GMC PM250 Engine Parts

ARP Auto Racing – For Use With Chevy Small Block Large Journal, 4 Bolt Main, Hex Head, Chrome Moly (Part No.134-5202)

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

Felpro – Engine Oil Pump Gasket (Part No.12172)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13955)

Edelbrock – Sure Seat Valve Springs for cylinder (Part No.5821)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Driveworks – Oil Seal (Part No.S-9845)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

ARP Auto Racing – For Use With All Chevy Small Blocks, 8740 Steel, 190000 Psi (Part No.134-7901)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 4569)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Dorman – Steel Cup Expansion Plug 13.70mm, Height 0.180 (sold by each) (Part No.555-007)

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

Felpro – Fuel Pump Bowl Gasket (Part No.773)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

National – Shaft Repair Sleeve (Part No.99176)

Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)

National – Engine Harmonic Balancer Kit (Part No.5000)

Mr. Gasket – Engine Oil Pan (Part No.9425)

ARP Auto Racing – For Use With Chevy Small Block With Standard 2 Piece Cork Gasket (Part No.234-1802)

Mr. Gasket – Mls Head Gasket (Part No.3128G)

Mr. Gasket – Mls Head Gasket (Part No.3130G)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Felpro – OIL PAN GASKET SET (Part No.OS 30191 C-3)

Felpro – Fuel Pump Bowl Gasket (Part No.773)

Felpro – Fuel Pump Bowl Gasket (Part No.5019)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45114)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13955)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 3460 A)

Felpro – Engine Oil Pump Gasket (Part No.12172)

Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 5974)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

MAHLE Original – Fuel Pump Gasket (Part No.D27094)

Driveworks – Oil Seal (Part No.S-9845)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 12173)

ARP Auto Racing – For Use With Chevy Small Block, 5/8" Socket Size, 3/4" – 16 Thread Size (Part No.134-2501)

ARP Auto Racing – For Use With Chevy Small Block Large Journal, 4 Bolt Main, Hex Head, Chrome Moly (Part No.134-5202)

ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)

ARP Auto Racing – For Use With Chevy Small Block, 13/16" Socket Size, 2.470" Under Head L (Part No.234-2501)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)

Edelbrock – RPM Small-Block Chevy Cylinder Head SBC 70cc Hydraulic Flat Tappet Cam (Part No.60739)

Edelbrock – E-Tec-200 Small-Block Chevy Cylinder Head Hydraulic Flat Tappet Cam (Part No.60989)

ARP Auto Racing – For Use With Oem Cylinder Heads/ Most Edelbrock, 12Point Head, 180000Psi Tensile (Part No.134-3701)

Mr. Gasket – Mls Head Gasket (Part No.3130G)

ARP Auto Racing – 1.75"Oal Stud, 0.8"D Adjuster Third, 3/8"-24, 7/16"-14, 0.7"D Screw-In, Set Of 16 (Part No.134-7101)

ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Chrome Moly, With Washers (Part No.134-3601)

ARP Auto Racing – For Use With 2004 And Later Gen Iii/ Ls Series Small Block, 200000Psi Tensile (Part No.134-3610)

Edelbrock – Small-Block Chevy E-Series Cylinder Head E-210 Hydraulic Roller Cam (Part No.5087)

Edelbrock – Small-Block Chevy E-Street Cylinder Head 70cc Pair (Part No.5073)

Edelbrock – Small-Block Chevy E-Street Cylinder Heads 64cc (Part No.5089)

Edelbrock – RPM Small-Block Chevy Straight Spark Plug 70cc Hydraulic Roller Cam (Part No.60735)

ARP Auto Racing – ARP Cylinder Head Stud Kit (Part No.234-4301)

ARP Auto Racing – For Use Wit 2003 And Earlier Gen Iii/Ls Series Smal Block, Hex Head, Chrome Moly (Part No.134-3609)

Edelbrock – Sure Seat Valve Springs for cylinder (Part No.5821)

Edelbrock – Sure Seat Valve Springs for Cylinder Heads (Part No.5823)

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Edelbrock – Sure Seat Valve Springs (Part No.5825)

Mr. Gasket – Mls Head Gasket (Part No.3128G)

Felpro – Cylinder Head Gasket Set (Part No.HS 7391 S-4)

Edelbrock – Valve Seat for S/B Chevy heads with 1.60" Valves (Part No.9710)

National – Engine Harmonic Balancer Repair Sleeve (Part No.88176)

National – Shaft Repair Sleeve (Part No.99187)

National – Multi Purpose Seal (Part No.9845)

National – Engine Harmonic Balancer Kit (Part No.5000)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

MAHLE Original – Engine Timing Cover Seal (Part No.65022)

ARP Auto Racing – For Use With All V8 Chevy, 12 Point Head Type, Black Oxide, Chrome Moly (Part No.200-1501)

Edelbrock – Victor-Link Adjustable True-Roller Timing Chain Set (Part No.7880)

Edelbrock – Performer-Plus Camshaft Kit for 1957-86 Small-Block Chevrolet (Part No.2102)

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Chevy 283-400 V8 (Part No.7102)

Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)