1958 GMC PM250 Belts and Hoses

Essential Belts and Hoses for 1958 GMC PM250s

Gates – Premium Molded Coolant Hose (Part No.20065)

Premium Molded Coolant Hose

from

$19.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.7508)

Automotive XL« High Capacity V-Belt

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28545)

Green Stripe« Truck & Bus Series V-Belt

from

$62.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Gates – Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit (Part No.7570)

Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

from

$32.99
Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

Upgrade your 1958 GMC PM250 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 1958 GMC PM250, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Belts and Hoses are key to keeping your PM250 functioning at its best. At Advance Auto Parts, we offer a wide selection of 4 Belts and Hoses for the 1958 GMC PM250, designed to meet your needs without breaking the bank. From Engine Cooling Hose replacements to Serpentine and V Belts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 1958 GMC PM250 at great prices. Our Belts and Hoses inventory for this model ranges from just $19.49 to $62.99, with an average price of $42.12. Our 4 Belts and Hoses in stock come from trusted brands, so you’re sure to find the right part for your 1958 GMC PM250 without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 1958 GMC PM250 is always ready to roll. We’re committed to providing you with everything you need to keep your PM250 in top shape, all in one place. Start shopping confidently below for your 1958 GMC PM250!

Best-Selling Engine Cooling Hoses for 1958 GMC PM250s

Enhance the driving experience in your GMC with 2 quality Engine Cooling Hose components, starting at $19.49.

Gates – Premium Molded Coolant Hose (Part No.20151)

Premium Molded Coolant Hose

from

$52.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Premium Molded Coolant Hose (Part No.20065)

Premium Molded Coolant Hose

from

$19.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Most Popular 1958 GMC PM250 Serpentine and V Belts

Customize your GMC with 2 Serpentine and V Belts products like V-Belts, all priced under $62.99.

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR28545)

Green Stripe« Truck & Bus Series V-Belt

from

$62.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Gates – Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit (Part No.7570)

Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

from

$32.99
Notched V-Belt: 57.81" Long, 1 Strand, Exact Fit

FAQs for 1958 GMC PM250 Belts and Hoses

Which Belts and Hoses are best-sellers for 1958 GMC PM250s?

Out of 4 Belts and Hoses that fit 1958 GMC PM250s, the following parts are the top sellers:

What’s the price range for 1958 GMC PM250 Belts and Hoses?

Belts and Hose prices for the 1958 GMC PM250 start at $19.49 and go up to $62.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 1958 GMC PM250?

The average price for Belts and Hoses for the 1958 GMC PM250 is $42.12. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other GMC PM250 model years?

Yes, we currently carry Belts and Hoses for 4 model years of GMC PM250s between 1955 and 1959. Belts and Hoses are bought most frequently for the following model years: 1957, 1955, 1956, and 1959.

What are the cheapest Belts and Hoses for my 1958 GMC PM250?

The cheapest 1958 GMC PM250 Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 1958 GMC PM250?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 1958 GMC PM250:

Can I get help with 1958 GMC PM250 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Belts and Hoses and more.

What is your return policy for GMC PM250 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new GMC PM250 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.